The results show that the system dynamics method is reasonable and effective, which can effectively reflect the company future operating conditions.
结果表明，采用系统动力学方法能有效地反映电网企业未来的经营状况，合理、实用。
Based on multibody system dynamics method and ADAMS software platform, a rigid-flexible coupling multi-body model is built for vehicle dynamics simulation.
利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。
It makes use of system dynamics method to forecast: the balance sheet, the profit and loss statement, Cash flow statement, and calculates out the part proportion index consonant with reality.
利用系统动力学方法预测资产负债表、损益表、现金流量表，计算出的比率指标与实际值基本相符。
The method of System Dynamics was used to study the dynamic change trend of many natural resources and environment in the Yellow River delta.
用系统动力学方法研究了黄河三角洲地区多种资源和环境的动态变化趋势。
A rigid controller for the unmeasured vibration states was designed and a compensatory method for the impact on position control caused by system dynamics was given.
针对振动状态的不可测量性，应用刚性控制规律设计了控制器，给出了一种补偿系统动力学对位置控制影响的方法。
Kinetics of robot research dynamics problem and inverse problem of two aspects, the need to adopt strict system method for the analysis of robot dynamics.
机器人动力学主要研究动力学正问题和动力学逆问题两个方面，需要采用严密的系统方法来分析机器人动力学特性。
Based on the qualitative analysis to inverse dynamics of delay system, through modifying conventional fuzzy controller, a new control method which is fit for delay system is presented.
该文在延迟系统逆动力学过程定性分析的基础上，对传统模糊控制器加以改造，提出一种新的适合于迟延系统的控制方法。
With the method of system dynamics, the model of environmental economic system of Zhenjiang city in Jiangsu province is set up.
选取江苏省镇江市为例，运用系统动力学方法建立了该市的环境经济系统模型。
By using transfer matrix method of multibody system and launch dynamics theory, the relations between the firing orders and performance of MLRS were established.
应用多体系统传递矩阵法和发射动力学理论，建立了多管火箭武器射击顺序与多管火箭武器系统性能之间的定量关系。
The safety coefficient method, which is aimed to construct the evaluation of traffic conditions using system dynamics, is proposed to modify the drawbacks of the current evaluation of traffic safety.
针对目前我国交通安全评价方法存在的缺陷，运用系统动力学原理，建立了交通安全度评价的安全因数方法。
This paper deals with the driving process of chain sprocket system with the multi rigid body dynamics method.
采用多刚体方法对链条链轮系统的驱动过程进行了建模和动力学分析。
The gear transmission system dynamics model was analyzed according to the gear transmission principles and a dynamics method based on gear contact calculation was given.
从齿轮传动的基本原理出发，系统地分析了多轴齿轮传动系统的动力学模型原理，提出了基于齿轮副接触算法的动力学仿真模型。
This paper analyses the development difficulty of a large flexible rotating platform and brings out a method to realize modeling and simulation with dynamics of multibody system.
在分析了大型柔性转台研制难点的基础上，提出了采用多柔体动力学方法进行大型柔性转台系统的建模与仿真。
The adjoint variable method for design sensitivity analysis of multibody system dynamics based on ordinary differential equations is presented.
基于常微分方程数学模型建立了多体系统动力学设计灵敏度分析的伴随变量方法。
It is the best advantage that the method does not require apriori information of system dynamics, and the control can be achieved easily.
此控制方法的优点是不需要系统的动力学信息，系统的维数和参数均不改变，实验中容易实现。
Taking the sleeve roller chain as an object the influencing factors on dynamics were analyzed and the dynamic modeling method for this kind of system was discussed.
以套筒滚子链为工作执行机构的一类机械系统为研究对象，分析了其动力学影响因素，探讨了该类系统的动力学建模方法。
The method of frequency domain is used to research the random responses of linear system on vehicle dynamics.
运用频域法对线性汽车动力学系统的随机响应进行研究。
Analysis of port's influence on economy is conducted based mainly on system dynamics (SD), combining also input-output method, the Mulitplier, and econometrics model.
以系统动力学(SD)模型为主体，结合投入产出法、乘数法和计量经济学模型，进行了港口经济影响分析。
This paper gives out the model of mechanical system dynamics and builds the correcting method for system dynamics model, which is based on the obtained data and computer simulations.
本文提出将实物仿真与计算机仿真相结合，建立基于实验数据的机械系统动力学模型，研究了对系统动力学模型的修正方法。
Based on the dynamics of structure, this paper presented apratical method of two steps by double model for calculating the complexity shock-isolating system with nonlinear stiffness.
基于结构动力学理论，提出了一种用于分析计算复杂非线性隔冲减振系统的双模型两步计算法。
The paper used the R-W method of multi-body system dynamics for the kinematical analysis of vehicle suspensions with closed loop system.
本文将多刚体系统动力学的R-W方法应用于具有闭合链系统的汽车悬架运动分析。
In this paper a numerical calculating method based on the principle of "multiple-masses replace system" for dynamics of connecting rod of internal combustion engine is proposed.
本文提出了一种基于“连杆多质量代替系统”的连杆动力学的数值计算方法。
Recently, mixing of liquids has been associated with the chaotic behavior of dynamics system and it is to provide a new method for analyzing and understanding numerous mixing.
最近粘性流体分布混合和动力系统的混沌行为联系起来，为分析和理解各种混合提供了新思路。
Method Statistical analysis of historical data was adopted to set up computer model of system dynamics and simulation system of Polcy-making.
方法采用历史数据统计分析，建立系统动力学模型及决策模拟系统。
The purpose was to provide a new technical method for dynamics characteristics analysis of complex system.
研究结论为复杂系统动力学特性分析提供了一种新的技术方法。
In this paper, a new computer-oriented method of obtaining the numerical solution of the dynamics of open loop multibody system is developed.
提出了获得开环多体系统动力学数值解的新方法。
Basis on the dynamics model of the product package system, the response of vibration environment in fragility part of this system is calculated with the method of pulse response.
以包装件的力学模型为依据，用脉冲响应法求解产品中易损零件对振动环境的响应。
Then vertical contact dynamics of tire is analyzed with contact patch considered, and that of the system composed of wheel, suspension and car body are analyzed by using modal synthesis method.
然后计算了考虑接地印迹长度的垂直接地动特性，并采用模态综合方法分析了车轮、悬架与车身组合系统的特性。
Then vertical contact dynamics of tire is analyzed with contact patch considered, and that of the system composed of wheel, suspension and car body are analyzed by using modal synthesis method.
然后计算了考虑接地印迹长度的垂直接地动特性，并采用模态综合方法分析了车轮、悬架与车身组合系统的特性。
应用推荐