Study on Strength PropertyThe shear strength of EPS beads-mixed lightweight soil is an important property in engineering design and analysis.
强度特性研究抗剪强度是EPS颗粒混合轻质土的重要工程性质,对工程设计和计算具有重要意义。
Through using the method of maximum strength capacity threshold, this paper made test and study on strength endurance of 10 male and female elite speed skaters in short distance in China.
运用“最大力量能力阈”的测试方法,对国内10名男子和10名女子优秀短距离速滑运动员的力量耐力进行测试与研究。
The paper describes a study on strength and cracking-resistance of fly ash concrete, and provides a guideline for use of fly ash as an addition in concrete and a suggestion for its intensive use.
本文对粉煤灰混凝土的强度和抗裂性进行了探讨,并对混凝土中掺用粉煤灰的原则及推广应用提出意见。
Objective To study the effects of different treatment methods on the biaxial flexural strength of hot pressable ceramic.
目的研究不同处理方式对白榴石增强陶瓷的双轴弯曲强度的影响。
Based on the study of anti-collision performance of this type of double-hulled structures, some useful conclusions about the improvement of collision strength are obtained.
文章还对该结构形式的承碰性能进行了探讨,获得了一些旨在改善碰撞强度的有用的结论。
By the study on the carbon fibre reinforced cement, this paper finds the relations between carbon fibre contemt and composites compressive strength and tensile strength.
本文通过对水泥基体掺入碳纤维进行研究,得出了复合体抗压强度、劈拉强度与碳纤维掺量的关系。
Study on the influence of constitutive parameters of rubber on static strength of the resilient wheelset is also carried out.
同时,研究了橡胶的本构参数对弹性轮对静强度的影响。
The discovery would be helpful to a thorough study on the strength theory, deformation and stability analysis in soils.
这将有助于土体在强度理论、变形和稳定分析等方面的深入研究。
Objective To study the effect of different factor settings on the strength of Co Cr alloy welded by laser.
目的研究在不同参数设置下激光焊接对钴铬合金焊接强度的影响。
Theoretical analysis on suitable raw coal sizes for briquettes and experimental study on the relation between raw coal sizes and briquette strength have been carried out.
采用理论分析方法对合理原料煤级配进行了分析,并对原料煤级配与型煤强度的关系进行了实验研究。
On the basis of the study on remaining strength and remaining life, it programmed software 'remaining strength assessment and remaining life prediction system' using VB6.0.
在剩余强度和剩余寿命研究的基础上,用VB6.0编制了“腐蚀管道剩余强度评价和剩余寿命预测系统”软件。
The study on the strength and performance of circular CFST have been carried in many countries, but research on the hysteretic behavior of circular CFST under variable axial force is very limited.
目前,许多国家都开始了对圆钢管混凝土构件的强度和性能的研究,但对变轴力下圆钢管混凝土支撑滞回性能研究还较少。
In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.
本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响,并探讨了热压含碳球团获得高强度的机理。
Base on this, the influence of urea formaldehyde resin on the water resistance of MOC was investigated through an experimental study with strength and water-resistance as evaluation indexes.
在此基础上,本文通过试验研究,以氯氧镁水泥的试块强度和耐水性为指标,探讨脲醛树脂对氯氧镁水泥耐水性的影响。
The study results on mechanical properties of fine cement grout and its calculus, including cohesion, stability, setting time, compressive resistance and impervious strength, etc.
介绍了细水泥浆液及其结石的物理力学特性(粘度、稳定性、凝结时间、抗压和抗渗强度等)的改性研究成果。
Objective To study the effects of colour on diametral tensile strength and bonding strength of resin.
目的:研究颜色的不同对树脂粘结剂径向抗张强度及其与瓷粘结强度的影响。
A systematic study of theoretical methods for predicting ultimate hull girder strength of ships is carried out based on long-time theoretical and experimental work in authors group.
本文在多年船体极限强度理论和试验研究工作的基础上,对船体极限强度分析的理论方法进行深入系统的研究。
Based on an experimental study of multiple repairing welded joints on high strength offshore structure steel, the R-S-N curves and life estimation equations under Weibull distribution are presented.
对海洋平台用高强度钢焊接接头多次补焊的疲劳性能进行试验研究,给出采用威布尔分布下的寿命估算式及R—S—N曲线。
Experimental study on static and dynamic strength properties of two kinds of saturated tailings is carried out.
介绍对两种饱和尾矿料(尾矿砂和尾矿泥)的静、动强度特性进行的一系列试验研究。
In the previous study on the mechanism reliability, the reliability of strength and longevity was paid more attention to while the study of mechanism action reliability was ignored.
在以往的机械可靠性研究中,比较重视强度和寿命的可靠性问题,而对机构动作可靠性的研究较少。
Object: The object of this study was to investigate the effects of iatrogenic pedicle perforations from screw misplacement on the mean pullout strength of thoracic pedicle screws.
目的:本研究目的是调查置钉位置不当引起医源性椎弓根壁穿破对胸椎椎弓根螺钉平均拔出力的影响。
This paper reports the study on the factors affecting the strength of paper chopstick.
对影响纸质方便筷强度的主要因素进行了研究。
Test and study on compression strength and shear strength of the brickwork for a new concrete small hollow block with connector have been carried out.
对一种带联接件的新型混凝土小型空心砌块砌体的抗压强度和抗剪强度进行了试验研究。
A thorough study has been made on the pouring system, runner board, temperature control, strength and rigid, etc.
对模具从浇注系统、流道板及模具的温度控制和强度、刚度等方面进行了深入的研究。
This paper aims to conduct integration study on construction loads and falsework strength with design theories for structure reliability.
中文摘要本研究旨在透过结构可靠度设计理论,对营建载重与模板支撑本体强度进行整合性研究。
Microwave Sintering, as a new aspect on the study of ZTA ceramics, improves the bending strength and the fracture toughness KIC of ZTA and the micro structure.
选用微波烧结新工艺,对ZTA陶瓷力学性能进行了研究,获得了较传统烧结工艺优良的陶瓷力学强度和断裂韧性。同时,新工艺改善了陶瓷体的显微结构。
Objective: the aim of the study was to investigate the effects of different etching time on shear bonding strength to guide its clinical use.
目的:研究不同酸蚀时间和不同施力方向对正畸托槽与牙面间剪切强度的影响。
The problem of study on fatigue strength of flexible wheel which mainly influence life of harmonic drive is one of the most important research of harmonic gear drive.
作为决定传动寿命的柔轮疲劳强度的研究问题一直是研究谐波齿轮传动的重心。
Objective:To study the effects of duty cycle and frequency of microarc oxidation(MAO) on the titanium ceramic bonding strength.
目的:观察钛试样在微弧氧化处理过程中,不同的占空比和脉冲频率对钛瓷结合强度的影响。
In this paper, an elementary study on dynamic split strength of SFRHSC is carried.
本文还对钢纤维高强混凝土动态劈裂强度进行初步研究。
应用推荐