AIM: To determine the stress and strain distribution of femur under impact force during human gait cycle.
目的：考察人体步态运动过程中冲击载荷作用时的应力和变形分布。
Secondly, the model of deck pavement is analyzed by finite element software ANSYS to get its stress and strain distribution.
其次，本文使用ANSYS通用有限元策略对桥面铺装模型进行浅析浅析并得出它们的应力应变分布。
Comparison of four different combinations of the same time, the stress and strain distribution, the size of the plastic zone.
同时对比了在四种不同组合时，应力、应变的分布，塑性区范围的大小。
The results show that the stress and strain distribution around the cold worked hole are similar between the model and real object.
结果表明：带衬套挤压和不带衬套冷挤压时孔边载荷的分布，模型材料与原型实际挤压结果相似；
However, global structural stress and strain distribution can be calculated quickly, correctly and intuitively by finite element software.
而用有限元软件进行计算能够快速、准确、直观地得到结构上各部位的应力、应变等参数的分布情况。
While we can quickly, accurately and intuitively get the global stress and strain distribution about the structure by the finite element software.
而应用有限元软件进行计算能够快速、准确、直观的得到结构上各部位的应力、应变等参数的分布情况。
BACKGROUND: It is currently urgent to design biomechanical principles-based bone plate according to stress and strain distribution after plate fixation.
背景：研究接骨板固定后的应力、应变分布规律，设计符合生物力学原理的接骨板是当前急待解决的课题。
A study of the stress and strain distribution of anchorage zone in a long span PC box girder was undertaken in the background of Hangzhou Bay Bridge project.
本文以杭州湾跨海大桥北航道非通航孔桥为工程背景，对大跨度预应力混凝土箱梁锚固区混凝土的应力应变分布特征进行了分析研究。
The stress and strain distribution and evolution during pore deformation are analyzed and various factors influencing the pore closure and welding are examined.
基于数值模拟结果 ，分析了影响空洞闭合的主要因素及其影响规律 ，构造了考虑各种影响因素在内的锻合压下率计算公式。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
The stress and strain distribution and their variation regularities were analysed. The measures taken to improve the new technology have been pointed out, and the FEM …
指出了改善整体液压胀球工艺的措施，并与实验结合进行了对比，结果表明有限元结果与实验结果相吻合。
At the same time, 3D-FEM simulation of the whole process was performed using DEFORM-3DTM software. And the load-stroke curve, effective stress and strain distribution, and so on were obtained.
用三维有限元数值模拟软件DEFORM-3DTM进行了数值模拟研究，得到了锻造载荷-行程曲线以及整个成形过程的应力和应变分布等，并与传统的均匀加放余量法进行了比较。
Only if this short crack extends long enough and blunted wide enough, can it affect the principal crack extension and the distribution of stress and plastic strain.
只有小裂纹扩展到足够长并钝化到足够宽，才能够影响主裂纹的扩展及其前端应力、应变的分布。
Strain fatigue and stress fatigue are related by the influence coefficient of strain distribution.
通过应变分布影响系数把应变疲劳与应力疲劳联系起来。
Objective: To analyze the influence of different tilted angle on the distribution of the stress, strain and displacement on the implant_bone interface.
目的：分析不同倾斜种植对种植体界面应力、应变及位移分布状况的影响。
Cauchy stress, plastic strain and slipping-off distribution in the workpiece during drawing process are given.
模拟得出了变形过程中的应力应变状态和错动量分布。
It is difficult to calculate theoretically the exact distribution of the stress and strain because of the complex structure of landing gear.
由于起落架的结构比较复杂，很难通过理论计算得出准确的应力应变分布。
The paper mainly focuses on the analysis of the distribution of stress and strain in the flange of a cup-shaped part during deep drawing, according to the plastic mechanics theory.
用塑性理论求得杯形件拉深成形工艺过程中凸缘部分的应力与应变分布的解析解。
The paper studies distribution law of stress and strain of gate-dam under static regime with three-dimensional finite element method.
本文采用三维有限元方法，研究堰闸坝在静力状态下其应力和变位的分布规律。
The images from result show the distribution of stress and strain and supply basis for the analysis to the change of stress and strain.
从计算结果中提取应力应变云图显示了工件及刀具的应力应变分布情况，以此对切削过程中应力应变的变化进行了分析。
In order to strengthen anti fatigue of cold worked hole, it is necessary to control the magnitude and distribution of the surface residual stress and strain.
为了使冷挤压孔真正起到抗疲劳增寿效果，有效控制孔表面残余应力大小及其分布是至关重要的。
The bending and shear modifying coefficients are derived according to the distribution of the stress and strain of the sandwich plate along the direction of the plate thickness.
根据夹层板的正应力、正应变和剪应力、剪应变沿板厚的分布关系，得到夹层板的弯曲、剪切修正系数。
Through the various components of the stress and strain field distribution, as well as the typical node displacement curve analysis, to study the variation of the motion state of rolling bearings.
本文对滚动体和内外圈的应力、应变场的分布情况以及对滚动体上典型节点处的位移曲线进行了分析，并获得了滚动轴承在运转过程中比较直观、定量的分析数据。
Furthermore, stress strain distribution in the solder joints has dynamic feature during temperature cycling and is related to temperature history.
在温度历史过程中，应力—应变场等值分布图呈现动态特性，且与温度历史相关。
These can be essentially obtained by the distribution analyses of the stress and strain extreme values near the crack tips according to the theory of fracture mechanics.
利用断裂力学中的裂纹尖端应力和应变场的极值分布情况，可以从根本上解决这一问题。
The strain state of the emplaced magma is shown by ellipsoid parameters, and distribution of stress field of the magma reflects the ways of emplacement and tectonic environment.
从磁化率椭球参数可以看出岩浆侵位的应变状态； 岩浆应力场分布体现了岩浆侵位方式及其所处构造环境。
The strain state of the emplaced magma is shown by ellipsoid parameters, and distribution of stress field of the magma reflects the ways of emplacement and tectonic environment.
从磁化率椭球参数可以看出岩浆侵位的应变状态； 岩浆应力场分布体现了岩浆侵位方式及其所处构造环境。
应用推荐