By means of the experimental data from dynamic triaxial stress-strain test of variable cyclic amplitude for frozen soil, the formative conditions of residual strain on frozen silt clay are studied.
基于不等幅值循环荷载作用下低温三轴振动试验资料,研究了冻结粉质粘土在分级往返加荷情况下的残余应变产生条件。
It could be used to determine stress-strain relation in oedometer test.
该方法可用于电压表试验中应力-应变关系的确定。
The relationship between stress and strain in a particular material is determined by means of a tensile test.
最佳答案之间的关系应力和应变在一个特定的物质决心通过拉伸试验。
Universal tensile testing machine can analyze the test results, such as elongation, average value, the stress, strain and damage, etc.
万能拉力试验机可剖析整个测验的成果,例如伸长量、应力、应变、损坏值、平均值等。
The strain test in the agricultural machinery field was used to probe the stress variation inside a frame in order to examine the strength of the plastics greenhouse frames.
为验证大棚骨架的强度,用农机测试中的应变测量法,来探索其内部应力的变化情况。
Test results show that for the stress-strain curves with no obvious peak strain, it is a available to use work hardening rate method to determine peak strain and stable strain.
实验结果表明,对于无明显峰值应变的应力-应变曲线,采用加工硬化率方法确定峰值应变和稳态应变是一种有效的方法。
This method can be applied to designing sample components for fatigue test as well as to forecasting various fatigue life of component from stress fatigue to strain fatigue.
该方法不仅可用于构件从应力疲劳到应变疲劳的各类疲劳寿命预测,还可用于构件的疲劳试验模拟件设计。
The flow stress of 7A60 ultra high strength aluminum alloy was studied by isothermal compress test at constant strain rate.
采用等温恒应变速率压缩试验对7A60超高强度铝合金的流动应力进行了研究。
Firstly the dependence of stress strain behavior of polyolefin on the test conditions was investigated.
首先研究了聚烯烃应力应变行为的测试条件依赖性。
Integrate effect was estimated by measured layer gap, stress and strain through hydraulic bulge and pressure increase test.
通过在液压胀合处理及加压试验中实测的层间间隙、应力和应变来评估其贴合效果。
Using the test results, the stress strain behavior of the subgrade was quantitatively studied, and the causes of diseases in subgrade were analyzed.
运用试验结果定量分析了填土路基在往复列车荷载作用下应力应变反应特性,剖析了路基病害产生的原因。
The change of strain rate and stress rate of samples with and without yielding phenomenon was studied during the tensile test under the control of grip separate rate.
采用夹头分离速率控制方式对有屈服现象和无屈服现象的试样进行拉伸试验,探讨了试验过程中试样应变速率和应力速率的变化情况。
Characteristics of stress strain curves of the alloy deformed with the test parameters were analyzed.
分析了该合金在试验参数范围内变形的应力-应变曲线特征。
The FEA and test results of typical rubber components in the railway vehicle are listed, including the stress, strain, fatigue performance and stiffness etc.
再列举了几种典型机车车辆用橡胶零件的有限元分析和产品试验结果对比情况,包括应力、应变、产品的疲劳性能、刚度性能等。
According to the realistic stress path of deep excavation, normal triaxial apparatus of strain control was transformed and triaxial test conforming to deep excavation characteristic was designed.
针对深基坑开挖卸荷的实际应力状态,通过对常规应变控制式三轴仪的改造,设计了符合基坑开挖特点的三轴试验方法。
In the test, after anisotropic consolidation, keeping the deviator stress, pore water is injected using pore water control apparatus under a constant volumetric strain controlled condition.
该实验是在各项异性的固结作用后保持差应力,使用孔隙水控制装置在体积不变的应变控制条件下将孔隙水注入。
Stress corrosion cracking of an X60 pipeline steel in soil containing water has been investigated using slow strain rate test.
用光滑试样慢应变速率拉伸法研究了X60管线钢在含水土壤中的应力腐蚀。
The data from a large - scale consolidation test are important for the stress and strain analysis of a dam foundation.
大型固结试验所获得的参数,是坝基应力应变分析的重要数据,而此项试验研究工作,在东北地区尚未广泛开展。
This paper introduces the research results on numerical stress strain analysis and centrifuge model test for the TGPs high soil rock cofferdam.
介绍了应用数值分析和离心模型试验方法对三峡深水高土石围堰进行应力变形研究的成果。
Thls paper introduces data and result about structure design of the lifting beam, its strength check, nondestructive test, strain measuring and stress analysis.
本文介绍吊梁的结构设计与强度校核、无损检验、吊装过程应变测试及应力分析等方面的数据和结果。
The results of fatigue test of reactor manifest the fatigue life of the reactor materials under different strain and stress condition.
反应器的疲劳试验结果充分反映了反应器材料在不同应力应变水平下的疲劳寿命。
The backlight photography with single sample was used to measure the true stress-strain of the ductile material after necking in tensile test.
本文采用单试样逆光拍照法对延性材料拉伸试验缩颈后的真实应力-应变进行了有效的测量。
A pulse shaping technique has been used in split Hopkinson bar (SHPB) experiment, for ensuring the specimen in dynamic stress equilibrium and loaded under constant strain rate during the test.
在SHPB实验中,通过采用整形器技术,实现实验过程中的应力平衡和常应变率加载。
A valid method to make the anisotropic deformation behavior of load bearing unit clear is to research principal stress and principal strain relationship, and true triaxial test is a necessary means.
弄清受荷单元的主应力主应变关系是认识各向异性变形性状的有效方法,而真三轴试验是必要的手段。
With the aid of triaxial compression test, the shearing strength and strain-stress relationship characters of compacted loess is discussed.
通过常规三轴试验研究了压实黄土的强度指标和应力—应变关系。
A strain test system based on RS485 bus has been introduced for the stress monitor in the process of equipment-hoisting.
设计了一种基于RS485总线应用于设备吊装工作中应力监测的应变测试系统。
The stress field in the composite fabric which made by needle punching during tensile test, and the difficulty of calculating the stress - strain property are analyzed from the fabric structure.
根据针刺复合织物结构,分析其在拉伸过程中的内部应力场,说明拉伸应力应变预测计算的困难。
The further investigation of the equation showed that it could be used to determine stress-strain relation in oedometer test.
结果表明,文中方程可以用来确定压缩试验的应力应变关系。
The test result show that BGB plastic cushion material can restrict the tensile stress and strain and prevent the facing from crack under a relatively small sliding displacement.
研究结果表明,BG B塑性垫层材料可在较小的滑动位移下对面板拉应力和拉应变进行调整,确保面板在滑移过程中不开裂。
The test result show that BGB plastic cushion material can restrict the tensile stress and strain and prevent the facing from crack under a relatively small sliding displacement.
研究结果表明,BG B塑性垫层材料可在较小的滑动位移下对面板拉应力和拉应变进行调整,确保面板在滑移过程中不开裂。
应用推荐