Meanwhile the initial strain rate and strain temperature affect the austenite grain size and distribution of precipitation phase.
同时,初始应变速率和变形温度影响奥氏体晶粒尺寸和析出相的分布。
From this, the Limit of strain rate and strain of superplasticity can be given, and this is useful for practice of deformation with superplasticity.
由此可以给出超塑性变形时应变和应变速率区的限度,有益于指导实际的超塑性成型。
The microstructure evolution, which is governed by temperature, strain and strain rate during hot metal forming, is a key factor to the mechanical properties.
金属在热成形过程中的微观组织演变是影响产品力学性能的关键因素,该演变过程取决于温度、应变和应变速率。
The second shear strain gradient and the function reflecting the effect of strain rate are introduced into the yield function of classical elastoplastic theory.
在经典弹-塑性理论的屈服函数中引入应变梯度及考虑应变率效应的函数。
Time to peak systolic circumferential strain and strain rate were measured in 12 segments, and myocardial dyssynchrony was expressed as the SD of time to peak strain and strain rate.
用12个区域来测量收缩期圆周应变时间和应变率,并用应不峰值时间和应不率的标准差来表示心肌不同步。
The relationships between strain rate and the elastic modulus, critical strain, Poisson's ratio and energy absorption capacity of concrete are still studied.
分析了应变率对混凝土弹性模量、峰值应力时的应变、泊松比和混凝土吸能能力的影响。
Test results show that for the stress-strain curves with no obvious peak strain, it is a available to use work hardening rate method to determine peak strain and stable strain.
实验结果表明,对于无明显峰值应变的应力-应变曲线,采用加工硬化率方法确定峰值应变和稳态应变是一种有效的方法。
Methods Parameters of strain and strain rate were obtained and compared among 23 HCM patients, 30 patients with H-LVH and 20 healthy people (control group).
方法测定23例hCM患者、30例h - LVH患者及20例正常对照组常规超声心动图参数及室间隔与左室后壁应变率参数并进行对比。
Strong earthquakes occurred in the high-value region and its margins of shear strain rate, especially in the high-value region of shear strain rate in accordance with tectonic deformation background.
强震通常发生在剪切应变率的高值区及其边缘,尤其是与构造变形背景相一致的剪应变率高值区。
Because of its strength sensitivity to strain rate, sea ice displays different mechanism behavior and strength features in different range of strain rate.
海冰对应变速率变化较敏感,在不同应变速率范围内可表现出不同的力学行为和强度特性。
Results: Although strain and strain rate declined from basal segment to apex, there was no statistical difference.
结果:基底段到心尖段应变与应变率呈下降趋势,但统计学差异无显著性。
Objective To study the influence of incidence angle of ultrasound and strain length(SL) on strain imaging(SI) and strain rate imaging(SRI) in long-axis direction.
目的探讨室壁与入射超声之间的夹角及应变长度(SL)对长轴方向应变成像(SI)和应变率成像(SRI)的影响。
The model includes the effect of strain rate sensitivity, strain softening and strain hardening.
该模型包括了应变率敏感性效应,应变软化效应和应变硬化效应。
The relation between the gradient of local (plastic) shear deformation and the local (plastic) shear strain and that between the gradient of velocity and the strain rate were established.
建立了局部(塑性)剪切变形梯度与局部(塑性)剪切应变分布之间的关系及速度梯度与应变率分布之间的关系。
The tensile strength of the composites increases with increasing the strain rate, and the failure strain decreases when the strain rate increases.
随着应变率的增加,材料的强度及弹性模量有较大程度的提高,但破坏应变有所降低。
Conclusion: There was no statistical difference of strain and strain rate between the different segments and the different walls.
结论:应变与应变率在同一室壁不同节段与不同室壁同名节段之间差异无显著性。
Objective to study the velocity, strain and strain rate of the carotid arterial wall motion using velocity vector imaging (VVI) in cerebral infarction patients.
目的应用速度向量成像(VVI)技术初步探讨脑梗死患者颈总动脉管壁短轴方向运动速度、应变及应变率的特点。
Using the GPS velocity field, we estimate the annual accumulations of strain rate field and strain energy density field.
进一步利用GPS速度场计算华北地区GPS地壳应变率场及应变能密度变化率场。
The higher initial strain hardening rate and higher strength of dual phase are attributed to rapid strain hardening in ferrite and the load transfer from the ferrite to martensite.
铁素体迅速应变硬化和铁素体到马氏体的载荷传递使双相钢具有较高的初始应变硬化速率和较高的强度。
The reason for the sawtooth chips is that the adiabatic shear localization occurs in the primary deformation zones when thermal softening exceeds strain and strain rate hardening.
锯齿形切屑产生的原因是第一变形区内因热软化超过应变和应变率强化而发生了绝热剪切局部化。
The theory can be used to study the distributed strain, strain rate, porosity and plastic shear displacement in fault band, which presents a new method for quantitative analysis of ductile shear zone.
梯度塑性理论可用于研究韧性断层带内部应变、应变率分布规律、断层带错动位移及带内孔隙度分布规律,为韧性断层带定量分析提供了新的手段。
At the same tensile strain, the power law relationship between band propagating velocity and applied strain rate is also obtained.
得到了在相同应变下,变形带的传播速率和加载应变速率之间的幂律关系。
The two dimensional accurate solution is obtained on plane strain assumption, the numerical results of strain energy release rate and crack tip energy release rate are presented.
在平面应变假设下,给出其二维精确解,并提供了机械应变能释放率和裂尖能量释放率等数值结果。
The model can be used to predict the thermal and mechanical data such as temperature, strain, strain rate distributions.
应用该方法可以给出轧件变形过程中诸如温度场、应变场和应变速率场等各种热力结果。
The creep strain rate sensitivity can be determined from the relationship between the creep hardness and creep strain rate by the definition of "work of indentation".
基于压痕做功概念定义了压痕蠕变硬度和蠕变应变速率,从而给出钎料的蠕变速率敏感指数。
The fracture strain energy density at the high strain rate is mainly determined by the initial elastic modulus and the unstable strain and affected by the temperature and the strain rate.
在高应变率下,断裂应变能密度主要由初始弹性模量和失稳应变共同决定,受温度效应和应变率效应的综合影响。
And the effects under the control laws of negative strain rate feedback and positive strain feedback are compared.
比较了应变率负反馈和应变正反馈控制律的控制效果。
Objective:To investigate the changes of right ventricular velocities, strain and strain rate in patients with atrial septal defect(ASD)after transcatheter closure.
目的:运用二维超声斑点追踪技术评价经皮房间隔封堵术前后患者右心室运动速度、应变及应变率的急性期变化。
Raising the testing strain rate, the strength and yield ratio increased the plasticity slightly decreased, but the strain rate hardening index kept constant.
应变率增加,材料强度提高,屈强比增大,塑性略有降低,但流变阶段应变率强化系数基本不变。
The paper presents a systematical review on the recent studies for the problem of decomposition of strain and strain rate in finite elastoplastic deformation theory.
本文对有限弹塑性变形中关于应变及应变率的分解问题进行了系统的评述。
应用推荐