It is the basis to determine the roller diameter position and strain analysis.
它是确定轧辊滚动直径位置和张力分析的基础。
All the achievements can be as reference in the nonlinear stress and strain analysis of...
这些成果均可供土坝非线性应力应变分析中使用。
All the achievements can be as reference in the nonlinear stress and strain analysis of the earth dam.
这些成果均可供土坝非线性应力应变分析中使用。
The grid method of strain analysis is one of the oldest techniques known to experimental stress analysis.
格栅法是实验应力分析中最古老的技术之一。
This paper presents a nonlinear Stress-Strain analysis of 2nd stage cofferdam of the Three Gorge Project.
本文对三峡工程二期围堰进行了非线性应力应变计算。
And then the stress-field of the fold structures in the basin was ascertained after structural strain analysis.
进而运用构造应力场分析的方法,恢复确定盆地褶皱构造的变形应力场。
A strain analysis model for continuously cast slab has been established on the basis of a thermal analysis model.
以凝固传热模型为基础,建立了连铸板坯应变分析模型。
In this paper, nonlinear stress-strain analysis for a high earth-rockfill dam and its foundation cutoff is given.
本文对一痤高土石坝与基础防渗墙进行了非线性有限元分析。
The diffuse necking and localized necking in the tensile testing of sheet is proved through reseau strain analysis.
通过拉伸过程应变网格分析,验证了薄板拉伸分散性失稳和集中性失稳的存在。
The data from a large - scale consolidation test are important for the stress and strain analysis of a dam foundation.
大型固结试验所获得的参数,是坝基应力应变分析的重要数据,而此项试验研究工作,在东北地区尚未广泛开展。
Centripetal force and tangential force or centrifugal force and tangential force could be used as a strain analysis method.
用向心力和切向力或离心力和切向力进行胁变分析是可行的。
The new theory and new method of the electromechanical stress and strain analysis of piezoelectric intelligent beam are studied.
研究了压电智能梁力电耦合应力应变分析的新理论新方法。
This paper briefly presents principle and methods of forming strain analysis technology, and option of materials by taking this technology.
简要介绍了成形应变分析技术的原理、方法,并应用这种技术对汽车冲压件进行了优化选材。
This paper introduces the research results on numerical stress strain analysis and centrifuge model test for the TGPs high soil rock cofferdam.
介绍了应用数值分析和离心模型试验方法对三峡深水高土石围堰进行应力变形研究的成果。
The finite strain analysis in the study of palaeogeography is a new problem to which little attention has been paid but which should not be ignored.
岩相古地理研究中的有限变形分析,是一个尚未引起重视但又不可忽视的重要课题。
This paper introduces the method for a strain analysis of the fabric (foliation and lineation) of granite by using the theory of the strain ellipsoid.
本文介绍了利用变形椭球体理论,对花岗岩组构(叶理、线理)进行应变分析的方法。
Some examples on optical engineering are provided to illustrate its different applications on stress analysis, strain analysis and dynamic analysis etc.
结合几个光学工程的设计实例,概括了有限元法在光学系统结构应力分析、形变分析和动态特性分析等方面的应用。
Landslide is the scope of geomechanics, the establishment of an appropriate model of the mechanical structure, the theoretical stress and strain analysis.
滑坡属于地质力学的范畴,建立适当的力学结构模型,进行理论上的应力应变分析。
In this paper, the stress-strain analysis and life prediction for the notched shafts were studied under multiaxial constant amplitude proportional loading.
本文针对多轴比例恒幅加载情况下的缺口件进行了应力应变分析和寿命预测研究。
So, the former strain analysis methods based on elliptic structural deformation markers can be used for the general structural objects with arbitrary shape.
先前适用于椭圆形标志体变形分析的方法均可应用于具有任意形状的构造标志体。
An equivalent no-perforated plate concept is introduced in the stress-strain analysis for densely-distributed film cooling holes on turbine blades of gas turbine engines.
以带气膜冷却孔的航空燃气涡轮发动机涡轮叶片为研究背景,引入了等效概念对密布小孔结构进行了详细的应力-应变分析。
The palaeogeography and the initial stratal thickness of the Middle Cambrian in the Western Hills of Beijing are restored through the finite strain analysis in this paper.
本文从有限变形分析入手,着重恢复北京西山中寒武世古地理原态及相应的地层初始厚度。
The forming limitation of two sheets were measured by using Automated Strain Analysis and Measurement Environment (ASAME) and the compact forming limit belts were obtained.
利用自动测试分析系统(ASAME)测量两种薄钢板的成形极限,得到分布较紧密的成形极限带。
In this paper, the technology of large deformation square grid and the geometrical simulation which is closely allied with the square grid strain analysis, are studied deeply.
本文对大变形理论网格法技术以及与网格应变分析相联系的几何模拟法进行了深入的研究。
The validity of modeling, the accuracy and reliability of simulation results for stamping forming processes of hubcap are affirmed on the basis of grid strain analysis technique.
对计算得到的轮包成形极限图、应力应变分布图进行了分析,并采用基于网格分析法的物理实验验证了有限元建模的可靠性和正确性。
FLD is usually measured with swell test in rigid die. The tested FLD is good fit that one measured by analogue computer in ASAME (Automated Strain Analysis and measure Environment).
成形极限图通常是通过钢模胀形试验测得,实际测量的成形极限图与ASAME自动应变测试分析系统模拟计算的成形极限曲线吻合较好。
The class 1 equipment is very important in the nuclear device, in the design and testing process required to carry out their stress and strain analysis, so as to ensure their safety.
一级设备在核设备中非常重要,在该设备的设计和调试的过程中需要对其进行应力与应变分析,从而确保其安全性。
The presentation of the method is not only in favor of the adhesive analysis between the contacting faces also offers a new thought for the stress and strain analysis of microgear train.
该计算方法的提出不仅有利于微齿轮接触齿廓间粘附分析,而且对微齿轮应力应变分析提供一种新思路。
Moreover, fully utilizing the nonlinear analysis capacities provided by ABAQUS, redevelopment is a shortcut and an effective solution to accomplishing stress and strain analysis for CFRD.
同时表明:充分利用ABAQUS已经具备的非线性分析功能,二次开发是完成混凝土面板堆石坝三维非线性应力应变分析的有效解决方案。
Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.
通过引入应力复数和应变复数的概念,提出了平面应力分析和平面应变分析的复数方法。
应用推荐