Through the dynamic calibration experiments, the step input and output signals with different amplitudes are obtained.
通过动态标定实验，得到不同幅值的阶跃输入、输出数据。
For example, a nonlinear system can change from sable to unstable, or vice versa, if the size of step input is doubled.
例如，当阶跃输入的的幅度增大一倍时，非线性系统可能会从稳定变得不稳定；反之亦然。
As for the SISO system with self-balance, a new PD fuzzy controller based on the steady response of its open loop step input is introduced.
针对一类具有自衡特性的SISO系统，借助其开环阶跃输入稳态响应所提供的信息设计了一个新颖的PD型模糊控制器。
This paper introduces the transient state response of the vehicle model which has two linear degrees of freedom with a step input of the front wheel.
介绍了在前轮角阶跃输入下线性二自由度汽车模型的瞬态响应，讨论了行驶车速对汽车瞬态响应的影响。
Meanwhile, the analytical solution of FADE only can be obtained under specific conditions, i. e. steady state flow with step input. Using the numerical methods to solve FADE is the best choice.
同时由于只有在特定的求解条件下，才能获得FADE的解析解，因此利用数值方法来求解FADE是一个重要的研究方向。
After several reviews of this doc, we are ready to enter the next step, data input and validation.
对这个文档进行几次评审以后，我们准备进入下一个步骤，数据输入和确认。
Continuing with our analysis, if there are several input lines going into and out of a step or resource, you have visually identified an architectural or structural bottleneck.
继续我们的分析。如果对一个步骤或资源来说有几条输入线，你就非常明显地定义了一个架构或结构上所说的瓶颈。
To test a map in the tooling, the first step is to create or select an input document to test.
要在工具中测试映射，第一步是创建或选择一个要进行测试的输入文档。
Write a script, produce one data file for each step, use a data file between each pair of steps as input, and collect the final file as the ultimate result.
编写一个脚本，为每个步骤生成一个数据文件，在每对步骤之间使用数据文件作为输入，以最后的文件作为最终结果。
Note that, as input, it requires the coveragedata file generated in Step 2 and (optionally) the baseline file generated in Step 1.
注意，作为输入，它需要在第 2步中所生成的覆盖率数据以及在第 1步中（可选）所生成的基线文件。
For each of the connections that you created in the previous step, click on the connection, then connect the inbound operation parameter to the outbound operation input.
对于在前一步骤中创建的每个连接，请单击该连接，然后将入站操作参数连接到出站操作输入。
A table step is a step within a task command that takes input parameters in the form of a table (with multiple rows and columns).
表步骤是任务命令中的步骤，它以表(具有多个行和列)的形式接受输入参数。
Each step in the assembly passes the entire hierarchical input to the output, plus an additional enrichment branch is added to the output that contains the result of the step computation.
程序集中的每一步都将整个分层输入传递到输出，另外一个额外的扩充分支被添加到输出中，包含步骤计算的结果。
This section describes the syntax of the XML snippet which is the input for the XSLT mapping step that transforms the pretty abstract parameterized verb into a set of plug-in specific staff queries.
本部分描述作为XSLT映射步骤输入的XML代码片段的语法，其中 XSLT 映射步骤将相当抽象的参数化谓词转换为一组特定于插件的人员查询。
The constructor to create a step takes its parent task command and step metadata as input parameters.
创建步骤的构造器将其父任务命令和步骤元数据作为输入参数。
The constructor to load a step takes its parent task command and step data as input parameters.
加载步骤的构造器将其父任务命令和步骤数据作为输入参数。
As a final step, the tool populates the implementation and interface WSDL files with the operation, input and output messages, and types.
最后一步，该工具将操作、输入和输出消息以及类型填入实现和接口WSDL文件。
If the step does not take a table as input, such as this example, then the syntax is equivalent to a table with a single row.
如果步骤没有使用表作为输入，例如本例，那么语法上等同于只使用了单行的表。
The mapping table is used as the last step in adapting the input to the output structure.
为使输入适应于输出结构，映射表用作最后一步。
Verify that your transformation appears similar to Figure 9, which illustrates the mapping between the input and output links (generated in Step 2) as well as the derivation that you edited in Step 4.
确保您的转换类似于图9，它演示了输入和输出链接之间的映射(在步骤2中生成)，以及您在步骤4中编辑的派生(derivation)。
Step 3. Instantiate the class for the method's input type.
步骤3.为方法的输入类型实例化类。
In that case, on the regroup step in the Assembly Editor, you should check Input Records of regroup are clustered by key - optimize execution.
在这种情况下，在AssemblyEditor中的重新分组步骤上，您应当检查InputRecordsofRegroupareclusteredbykey—optimizeexecution。
In Listing 8, you pass your input through your map script, sort that output (optional step), and then pass the resulting intermediate data through the reducer script.
在清单8中，通过map脚本传递您的输入、排序输出(可选步骤)、然后通过reduce脚本传递由此产生的中间数据。
Select the Application pool you created in step 2 in the "Application pool" input field.
选择步骤2中在ApplicationPool输入字段中创建的应用程序池。
The only input that requires an extra step is the chart type, which is represented by the Google Charts API using two - or three-letter abbreviations.
惟一需要额外步骤的输入是图表类型，它是由GoogleChartsAPI使用两个或三个字母的缩写表示的。
In Listing 14, the execute method first obtains the number of rows of parameters that are input to the step.
在清单14中，execute方法首先获取输入到步骤的参数的行数。
The first step is to parse the input service name into constituent words using the name Parser component.
第一步是利用NameParser组件将输入服务名解析为组件字。
SpinnerNumberModel: Used for accepting input from a range of Numbers (int or double) with a set step size.
SpinnerNumberModel：用于接受已设定好步长的一定范围内的数字(int或double)的输入。
As mentioned in step 1 of sample 4, an XML input stage is used to handle the repetition element in responses.
如示例4的步骤1所述，使用一个XML输入stage处理响应中的重复元素。
The sample XML document chosen in the previous step is now used as a basis to generate the input fields and controls for the XForms (see Figure 11).
前一步骤中选择的示例XML文档现在用作生成 XForm 的输入域和控件的基础（见图11）。
应用推荐