The defaults of traditional carbon steel converter are analyzed.
分析了传统碳钢转化器存在的缺点。
The main equipment such as stainless steel converter, fire tube boiler, main blower and concentrated acid pumps were made at home.
主要设备，如不锈钢转化器、火管锅炉、主鼓风机、浓硫酸泵等均为国产。
Steel converter is the main equipment in steel-making, and the drive mechanism, trunnion bearing, is the key component of steel converter.
炼钢转炉是炼钢生产的重点设备，而转炉的传动机构——耳轴轴承又是炼钢转炉的关键部件。
By analysing principle, hydraulic pressure, seal, the feasibility of oil pressure method about main gear in striking refinement vanadium steel converter are discussed.
通过对油压法的原理、液压力、密封等进行分析，阐明油压法在提钒转炉大齿轮拆除中的可行性。
The utility model relates to a slag-guard cap, which is used for instantaneously pushing off the slag at the molten steel outlet of a converter when the steel converter taps off.
一种挡渣帽是炼钢转炉在出钢时，用于转炉钢水出口处作瞬时挡渣用的。
The practical production show that the converter gas can be used in reheating furnace of steel rolling.
实践证明，轧钢加热炉使用转炉煤气是可行的。
The various measures adopted to prolong the furnace life of converter in Shijiazhuang Iron and Steel Company are stated.
论述了石家庄钢铁公司围绕提高转炉炉龄所采取的各种措施。
This paper explains the danger caused by converter bottom rising and minutely introduces the research outcome achieved in Benxi Iron and Steel co.
阐述了转炉炉底上涨带来的危害，详细介绍了本钢在预防和处理炉底上涨方面的研究成果。
By discussing about sampling method of liquid steel in converter, this article puts forward new sampling methods.
通过对转炉冶炼钢的熔炼成分取样方法的探讨，提出新的取样方法。
Test results show that such steel can be mass produced with technology of a large converter plus the secondary refining, which can insure drill pipes for the transverse impact toughness.
试验表明，采用合适的冶炼工艺，大型转炉加炉外精炼能够批量生产超低硫低磷钻杆用钢，使钻杆获得高横向冲击韧性。
It is phosphorus that limited the converter slag's recycling in steel making process.
转炉钢渣中的磷是影响钢渣在钢铁企业内部循环的主要因素之一。
Coat the exhaust system with ceramic without the catalytic converter OR let it rust out and replace the whole dang thang with stainless steel pipe sections.
大衣与不带催化转化器或陶瓷让它锈出来更换整个党的不锈钢管段胜排气系统。
The morphology of sulphide inclusions in sulphur-comprising micro alloyed steel manufactured by converter after rolling was observed.
用金相显微镜、扫描电镜和能谱观察和分析了转炉生产的含硫非调质钢轧后硫化物夹杂的形貌。
This paper introduces the technical process of converter continuous casting of deep drawing steel and its development of products.
介绍了深冲钢的转炉——连铸生产工艺及产品开发情况；
The effect of converter steel slag powder(CSSP), on the shrinkage characteristic of hardened GGBFS-PC mixed mortar is studied.
研究了转炉钢渣粉对矿渣粉-硅酸盐水泥混合胶砂硬化体收缩特性的影响。
Combined production practices, research is done on the high-quality lime which produced through rotary kiln for converter steel making at Bengang.
结合生产实践，对本钢回转窑生产供转炉炼钢用高质量石灰进行研究。
The morphology of sulphide inclusions in sulphur-comprising microalloyed steel manufactured by converter after rolling was observed.
用金相显微镜、扫描电镜和能谱观察和分析了转炉生产的含硫非调质钢轧后硫化物夹杂的形貌。
A simple and reliable experiment system is set up in order to obtain an experimental model of periodical and non-stable heat transfer procedure for waste heat boiler of steel-making converter.
鉴于对炼钢转炉锅炉研究的重要意义，设计了一套简单、可靠的试验系统，对炼钢转炉余热锅炉周期性的不稳定传热过程进行试验模拟。
The continuous-casting slab of high strength weathering steel produced by converter, LF and continuous-casting process has good quality.
经转炉冶炼、LF精炼和连铸工艺生产的高强耐候钢板坯质量优异。
The oxygen activity of converter molten steel directly influences the yield of alloy and quality of steel.
转炉钢水中的氧含量直接影响合金收得率和钢水的质量。
The amounts of oxygen and sulfur in liquid steel could be reduced by synthetic slag treatment during ld converter tapping, therefore, the quality of liquid steel was improved.
转炉出钢时对钢水进行合成渣处理，可以同时降低钢水中氧和硫的含量，综合提高钢水质量。
To introduce the software structure of computer process control system for LD converter of Baotou ironand Steel Corporation.
介绍了包头钢铁公司转炉炼钢过程控制级的软件结构，详细地说明了应用软件、基础软件。
It discussed the application of the water in series technology in blast furnace, converter, steel rolling of iron and steel production, and between factories.
介绍了迁钢各系统水的串接使用，探讨了串级用水技术在钢铁生产工艺中的高炉、转炉、轧钢及厂与厂之间的中的应用。
The structure and principle of integrating automated system of steel making converter was studied and the testing difficulties appeared in industrial site and corresponding solutions were discussed.
研究设计了转炉炼钢综合自动化系统，介绍了其结构和原理，讨论了工业现场经常出现的调试难点及相应的解决方法。
I have seen one of the conventional steelworks: huge blast furnace, converter, steel ingot, miles of railway track.
我参观过传统的炼钢厂：巨大的高炉、转炉、钢锭，长达几英里的铁轨。
The technique of audio frequency slag melting has been exploited for top and bottom combined blown converter in 150 t combined blowing converter of Tangshan Iron and Steel Company.
在唐钢150t复吹转炉上开发出适用于百吨以上顶底复吹转炉的音频化渣技术，并根据音频曲线实现了转炉吹炼操作的量化分级管理。
The present paper introduces a new technology by which the special steel is refined in the converter.
介绍了本钢利用转炉冶炼特殊钢的工艺技术。
I had saw one of the conventional steelworks: huge blast furnace, converter, steel ingot, mile of railway track.
我参观过传统的炼钢厂：巨大的高炉、转炉、钢锭，长达几英里的铁轨。
The molten steel composition adjustment model for LD converter based on minimum alloy cost is designed and applied to on line control of steelmaking process in Baosteel.
介绍了基于合金最小成本的转炉炼钢钢水成分调整模型并应用于宝钢炼钢在线生产控制的情况。
A mathematical modeling for AOD converter refining process of stainless steel has been developed.
本文提出了一个AOD转炉精炼不锈钢过程的数学模型。
应用推荐