The whole stainless steel powder tank is easy to dismantle and to clean the powder.
全不锈钢供粉筒，采用快拆式设计，清洁粉末便利快捷。
It is feasible to produce practical parts with the method of stainless steel powder inj...
说明用不锈钢粉末注射成形法制造生产实际中的零件是完全可行的。
Study on the Process of Fabricating Fine Stainless Steel Powder by Gas and Solid Dual-phase Atomization;
本文探讨了用纳米氧化铁粉末还原来制取微细铁粉的工艺。
The surface reaction of water atomized austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在烧结时的表面反应。
A series of experiments were carried out on Direct Metal Laser Sintering (DMLS) of 316 stainless steel powder.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列激光烧结实验。
The surface reaction of water atomized 304l austenitic stainless steel powder during sintering has been studied.
研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。
Influences of carbon, silicon and aluminium on the surface reaction of austenite stainless steel powder during sintering have been studied.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
This paper analyzes the influences of carbon, silicon and aluminium on the surface reaction when sintering austenite stainless steel powder.
研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
The stainless steel powder becomes finer and the size distribution is narrower with the mass flow rate and pressure of gas medium increasing.
随着气体介质流量及压力的增加，所制备的不锈钢粉末粒度越小，粉末的分布更集中；
The forming mechanism for the crack produced in the process of laser forming 316l stainless steel powder alloy has been studied in the paper by micro measurements.
采用微观测试分析方法，针对316L不锈钢粉末，深入研究了激光快速成形过程中熔覆层的开裂行为及其形成机理。
The main products: high voltage static generator, spraying gun, high voltage module, stainless steel powder bucket, Vuncheri powder pump, filter cylinder and pulsation valve.
主要产品：高压静电发生器、喷枪、高压模块、不锈钢粉桶、文丘里粉泵、滤筒、脉冲阀。
The paper summarizes the effect of additives on the liquid phase sintering behaviour of the compact of austenitic stainless steel powder and the properties of resultant material.
综述了添加元素对奥氏体不锈钢粉末压坯液相烧结行为及材料性能的影响。
The built-in high voltage static generator applies very light spraying gun (only 450g) with the electrical circuit imported from Germany and full stainless steel powder supply bucket.
内置式高压静电发生器，采用德国进口电路、重量极轻的喷枪（仅450克）和全不锈钢的供粉桶。
The mean grain size of stainless steel sintered from nano-sized powder was measured using these calibration curves.
利用该曲线计算出了纳米不锈钢粉末烧结试样的平均晶粒度。
It used materials is 0.4 millimeter stainless steel spring steel of powder coatings.
它使用的材料是0.4毫米的不锈钢弹簧钢，粉末涂层。
This study was aimed to evaluate the biocompatibility of metal powder injection molding (MIM) 316l stainless steel.
研究金属粉末注射成型(MIM)法制备的316L不锈钢植入材料的生物相容性。
Under different laser power condition, after interaction with laser beam, the temperature of the 316l stainless steel (ss) powder of different size is calculated.
系统计算了不同颗粒大小316L不锈钢粉末与不同功率激光束相互作用后的温度。
The phase structure and high toughness of powder sintered biphase stainless steel and after its ageing have been studied.
研究了粉末烧结双相不锈钢及其时效后的相结构和强韧性。
The advantages, technologies and research status of production of high nitrogen stainless steel by powder metallurgy at home and abroad are reviewed.
综述了粉末冶金高氮不锈钢的优点和所采取的主要工艺及国内外研究现状。
The results show that the efficiency of stainless steel flakes and glass flakes to improve the cathodic disbondment was better than that of mica powder.
结果表明，玻璃鳞片及不锈钢鳞片对涂层的耐阴极剥离性能的提高要好于云母鳞片；
Vibrating feeder: installed under the hopper and feeding speed can be adjusted based on real situations. It is stainless steel where it is touching the powder.
振动喂料器：安装在料斗下部，可根据实际情况调节进料速度，与料接触部分为不锈钢。
The braze of stainless steel joints with wide clearance is made by pre filling alloy powder into the gap.
采用先在钎缝间隙中预填合金粉，然后在钎缝外置放钎料进行钎焊的方法，解决不锈钢接头宽间隙的钎焊问题。
Applications: Used for the brazing, sintering and solution heat-treatment of automobile parts, stainless steel parts and powder metallurgical product.
用途：适用于汽车零部件、粉末冶金、不锈钢零件等的钎焊、烧结、固溶热处理工艺。
The anti-cavitation laser cladding technique for the surface of stainless steel is reviewed. The equipments, deposition process and laser cladding powder are introduced.
综述了国内外不锈钢抗空蚀激光表面熔覆技术的研究现状，介绍了该技术的特点，设备和抗空蚀熔覆粉末体系。
Applications: Used for the brazing, sintering and solution heat-treatment of automobile parts, stainless steel parts and powder metallurgical products.
用途：适用于汽车零部件、粉末冶金、不锈钢零件等的钎焊、烧结、固溶热处理工艺。
The invention provides a nitrogenous nickel-free stainless steel and a powder-metallurgical molding technology, relating to the field of stainless steel production.
本发明提供了一种含氮无镍不锈钢及其粉末冶金成形工艺，涉及不锈钢生产领域。
The results show that the combination of ZrO2 gel and nano-powder decreases diffuse and volume shrinkage. The coating which has no crack and good combination with stainless steel is obtained.
结果表明：粉体与溶胶的结合减少了粉体的扩散和体积收缩，得到与不锈钢结合良好且无开裂的涂层。
The results show that the combination of ZrO2 gel and nano-powder decreases diffuse and volume shrinkage. The coating which has no crack and good combination with stainless steel is obtained.
结果表明：粉体与溶胶的结合减少了粉体的扩散和体积收缩，得到与不锈钢结合良好且无开裂的涂层。
应用推荐