The bond strength of thermal sprayed coating is an important part for evaluating the quality of coating.
热喷涂层与基体的结合强度是衡量涂层质量的重要指标。
An appropriate thickness for the thermally sprayed coating is determined based on the measurement result.
基于测量结果确定热喷镀镀层的适当厚度。
Should first bonding wire brush to remove sediment from the bottom surface, and then immediately sprayed coating job.
应先用钢丝刷刷去除粘结底层表面的沉积物,然后立即喷涂工作涂层。
The present invention relates to coating pore sealing agent, and is especially one kind of pore sealing agent for hot sprayed coating and its usage.
本发明涉及一种涂层封孔剂及其使用方法,特别涉及一种热喷涂涂层封孔剂及其使用方法。
When WC content is more then 50%, spray-fusing technological property becomes worse, hardness of sprayed coating and low-stress abrasive particle wear resistance are weaken.
当w(WC)大于50%时,WC的加入使喷熔工艺性能变得极差,喷熔层的硬度和耐低应力磨粒磨损性能降低。
B, barrier type protective effect when the cold sprayed zinc coating is oxidation, will produce a layer of zinc salt in the coating surface to provide barrier protection.
屏障式保护作用当冷喷锌涂料被氧化时,会在涂料表面产生一层锌盐层来提供屏障保护。
Seal coating sprayed is currently used to adjust the gap between the blade tip and engine casing and improve engine efficiency.
采用喷涂封严涂层的方法调整叶片端部与发动机涡轮机壳之间的间隙以提高发动机效率。
Study on plasma sprayed nanostructured ceramic coating is one of the present promising fields in nanostructured coating.
等离子喷涂纳米陶瓷涂层的研究是目前纳米涂层领域研究热点之一。
The results indicate that the plasma sprayed wollastonite coating has a rough surface and lamellar structure including some pores and microcracks.
结果表明:等离子喷涂硅灰石涂层具有粗糙的表面和层状结构,涂层内部存在一些气孔和微裂纹。
Thermal sprayed nanostructured coating is one of the present promising fields in nanostructured coating.
热喷涂纳米涂层的研究是目前纳米涂层领域研究热点之一。
Plasma sprayed ceramic coatings with good corrosion resistance to liquid zinc were studied. Providinh a new project of liquid zinc corrosion coating by plasma spraying.
研究了等离子喷涂耐液锌腐蚀陶瓷涂层,提出了等离子喷涂耐液锌腐蚀陶瓷涂层的设计方案。
The mechanical property of flame sprayed nylon1010 and nanometer graphite coating was studied by (universal) testing instruments.
采用电子万能实验机对火焰喷涂尼龙1010和纳米石墨复合涂层的力学性能进行了研究。
Objective To study cellular compatibility and bone-inducing activity of the plasma sprayed wollastonite coating.
目的研究硅灰石涂层的细胞相容性和成骨诱导能力。
The study on artificial bone of plasma - sprayed hydroxyapatite coating on metal substrates is described in international range.
本文详细阐述了国内外学者对金属基等离子喷涂羟基磷灰石人工骨的研究状况。
It is proposed to get the piercing plug sprayed with a plasma coating in a bid to enhance its surface properties, and thus prolong its service life, and cut down the operation costs as well.
提出采用在顶头上喷涂等离子涂层的方法来提高穿孔顶头表面性能,从而提高其使用寿命,降低生产成本。
The Fe-Al coating sprayed by gas detonation-gun has a good property of resistant-corrosion.
采用气体爆燃喷涂技术制备的铁铝涂层具有良好的耐蚀性能。
The ceramic coating blade is the blade which is sprayed with metallic oxides using thermal spraying and then accurate grinded.
陶瓷涂布刮刀是在钢刮刀表面进行金属氧化物热喷涂并进行精密磨削加工后的刮刀,耐磨损、使用寿命长。
The results show that the corrosion potential of the Ti coating sprayed in vacuum is much higher than one of the Ti coatings sprayed in air and in argon, but a little lower than one of pure titanium.
在真空中喷涂的钛涂层基本上没有氧化物和氮化物,其衍射图谱与纯钛十分接近;
The results indicate that the wear loss of WC - co coating plasma-sprayed at low-pressure is less than that in air.
结果表明:低压等离子喷涂涂层的滑动磨损量小于空气等离子喷涂涂层。
For penetrating sealing and reducing popping on fully cured inorganic zinc paint and heat-sprayed metallic zinc coating.
用于无机硅酸锌或喷锌层的表面起渗透封闭作用,减少起泡现象。
Please confirm if the color to be sprayed is consistent with the spray coating requirements before spray coating. If not, please inform people in charge of the workshop.
喷涂前应核实所喷颜色与喷涂要求是否一致,若不一致,立即通知车间负责人。
The results show that the as-sprayed conventional ceramic coating has a typical lamellar stacking characteristic.
结果表明:用常规等离子喷涂法制备的陶瓷涂层为典型的层状堆积特征;
When the coating is in use, the viscosity of the coating is adjusted by distilled water, and the coating is sprayed in an airing chamber by using a spray gun through adopting a spraying method.
使用时用蒸馏水将涂料调整粘度,采用喷涂的方法,用喷枪在通风厨中进行喷涂。
The surface of mixer body is sand-blasted for rust-cleaning. The coating is sprayed firmly with high-grade paint of abrasion-resistant so as to extend the lifetime of coating.
搅拌机的桶体表面均经过喷砂处理,除锈彻底,漆膜牢固,并采用优质耐磨漆喷涂,大大延长了漆面的使用寿命。
The surface of mixer body is sand-blasted for rust-cleaning. The coating is sprayed firmly with high-grade paint of abrasion-resistant so as to extend the lifetime of coating.
搅拌机的桶体表面均经过喷砂处理,除锈彻底,漆膜牢固,并采用优质耐磨漆喷涂,大大延长了漆面的使用寿命。
应用推荐