A practical gas sensing system utilizing absorption spectrum scanning techniques was developed.
提出一种基于窄带气体吸收光谱扫描技术的气体定量测量系统。
The distribution of elements at the sulfidation reaction product section of a sodium salt-modified desulfurization agent was analyzed by using the energy-spectrum scanning function of SEM.
利用SEM的能谱扫描功能,对钠盐调质脱硫剂硫化反应产物断面元素分布进行了分析。
The article describes a new method of measuring semiconductor laser spectrum by plane scanning interferometer.
本文描述了用平面扫描干涉仪测量半导体激光光谱的一种新方法。
The mechanism of de-inking of photocopy waste paper with solvent treatment was investigated by Fourier transforming infrared spectrum (FT-IR), image-scanning and microscope analysis.
采用傅立叶变换红外光谱、图像扫描和显微分析等手段,研究了静电复印废纸溶剂法脱墨的机理。
Then we detected the physiochemical characteristics of the MS sample through scanning electron microscopy ( SEM ) , infrared spectrum ( IR )and differential thermal analysis ( DTA ) .
通过多种检测手段,如:扫描电镜(SEM)、红外光谱(IR)、示差热分析(DTA)等对制备样本的理化特性进行检测。
This paper presents a new system for optical spectrum record, using the automatic scanning silicon photodiode array detector. The data acquisition are fulfilled in real-time.
本文介绍了采用自扫描硅光电二极管阵为探测器的光谱记录系统,以及实时数据采集系统。
The chemical composition of the largest spot on thin layer plate was identified by Infrared spectrum, and its content was determined by TLC scanning.
挥发大蒜油在薄层板上分离出的最大斑点的化学成分用红外光谱法定性,用薄层扫描法定量。
Carries on the calibration equation using the transmission near-infrared meter FOSS1241 scanning spectrum the establishment.
利用透射型近红外仪FOSS1241扫描光谱进行定标方程的建立。
Both UV scanning spectrum and IR spectrum coupling occurred between SMD and BSA.
其紫外扫描光谱和红外光谱表明偶联成功。
The causes of the front fog lamp shield blistering after surface treatment are studied by means of metalloscopy scanning electronic microscope and energy spectrum analysis.
运用金相显微镜、描电镜和能谱仪,研究了前雾灯遮光罩表面处理后起泡的原因。
The surface topography and composition of normal coating and spot were investigated by scanning electron microscope and energy dispersion spectrum.
采用扫描电镜结合能谱的测试方法,对热处理前后含铬绝缘涂层中正常涂层和斑点的表面形貌及成分进行了分析。
A method of frequency spectrum analysis is introduced, which be realized by collect the virtual value of appoint frequency vibration through scanning frequency.
介绍了一种用频率扫描抽取指定频率振动分量有效值的方法实现硬件频谱分析的工作原理。
In many measurements, a short enough scanning step is required to acquire an adequate spectrum resolution.
在很多测量方法中都需要一个具有足够小的扫描步长,以保证能够获得足够的光谱分辨率。
The structure of the microspheres was analyzed using scanning electron microscopy, granulometer and infrared spectrum.
采用扫描电镜、粒度分析仪和红外光谱对微球结构进行表征。
By using visual examination, scanning electronic microscope, X-ray energy spectrum and metallurgy and chemical analysis, the cause of crack occurred in bellow expansion joint was analyzed.
采用宏观检查、扫描电镜、X射线能谱、金相分析及化学分析等方法,对金属波纹膨胀节开裂的原因进行了分析。
The failure of the powder metallurgy valve seat was analyzed by optical microscopy, scanning electronic microscopy, X-ray energy spectrum and X-ray diffraction.
采用力学、物理性能测试,金相、扫描电镜、能谱和X衍射分析研究了气门座圈产品失效的主要原因。
Metallographic observation, fracture scanning and energy dispersion spectrum analysis on the fractured turbine blade were carried out.
对汽轮机断裂叶片进行了金相组织观察、断口扫描及能谱分析。
We observe the morphology image of the samples by scanning electron microscopy (SEM), and measure the transmission spectrum and the polarization spectrum of the samples by the spectrophotometer.
用扫描电子显微镜观察了样品的形貌结构,用分光光度计测量了样品的透射光谱和偏振光谱。
The microstructure of the brazed joint was analyzed by means of a scanning electron microscope and an energy spectrum analyzer.
用扫描电镜和能谱分析仪对钎焊接头的显微组织进行了分析。
The graft-copolymer was analyzed with infrared spectrum, thermal analysis, laser Raman spectum, and its structure was analyzed with scanning electron microscope.
利用扫描电镜照片分析了接枝共聚物的结构;
Based on the analytic method of cyclic spectrum density, the paper pointed out that the impact frequency could be extracted effectively with the help of scanning cyclic frequency domain.
通过对循环谱密度分析方法的特性分析,指出应用循环谱密度分析方法可以在循环频率域有效提取出滚动轴承的冲击故障频率。
Some excellent high order calibration pulse waveforms of the spectrum characteristic are obtained by theoretical analysing and computer scanning.
通过理论分析研究和计算机搜寻得到几种频谱特性优良的高价标定脉冲波形。
The scanning electron microscope (SEM) and power spectrum are used to research the microstructure and the chemical composition of the black pottery.
用扫描电镜(SEM)和能谱仪对龙山黑陶的显微结构和化学组成进行研究。
When wave length scanning is carried out, three output white light interference spectrums of the interferometer and a transmission spectrum of the etalon and the fiber grating are probed.
扫描波长时,探测干涉仪的三路输出白光干涉光谱,以及标准具和光纤光栅的透射谱。
CSCM are primarily described by scanning electron microscopy, UV spectrum, IR spectrum and Elemental analysis.
并通过扫描电镜、紫外和红外光谱、元素分析对CSCM的结构进行了初步表征。
This paper analysed the pattern and composition of residual metal in diamond fracture surface by ways of Scanning Electron Microscope (SEM) and Energy Dispersion Spectrum (EDS).
采用扫描电镜(sem)和能谱(EDS)分析方法,分析了国内六种代表性的金刚石断面上残留触媒的形态及成分。
This paper analysed the pattern and composition of residual metal in diamond fracture surface by ways of Scanning Electron Microscope (SEM) and Energy Dispersion Spectrum (EDS).
采用扫描电镜(sem)和能谱(EDS)分析方法,分析了国内六种代表性的金刚石断面上残留触媒的形态及成分。
应用推荐