The effect of EA resin on the sol-gel process was studied.
研究了EA树脂含量对溶胶-凝胶过程的影响;
Structure evolution of both TEOS and colloidal silica in the sol-gel process was studied.
研究了正硅酸乙酯(TEOS)和硅溶胶水解聚合过程中溶胶聚合物分子的生长过程。
The structure of hair was replicated via a sol-gel process using human hair as the template.
以人发为生物模板,用溶胶-凝胶法对人发的表皮结构进行了复制。
The method of the invention comprises a sol-gel process and a vacuum freezing drying process.
本发明采用的方法为溶胶-凝胶和真空冷冻干燥法。
The Preparation of PMMA Wear Resistant Coating by UV-Light Polymerization and Sol-gel Process;
研制了一种应用于水力机械元件和设备的抗冲蚀磨损的胶粘耐磨涂层。
Firstly, ITO conductive anode films were fabricated on glass tube substrates by sol-gel process.
首先,本文重点研究了ITO薄膜的溶胶—凝胶制备工艺。
Li-doped lanthanum chromite powders in stoichiometric proportions were prepared by sol-gel process.
采用溶胶-凝胶法,按化学配比将锂元素掺入铬酸镧中制得粉末。
The sol-gel process is a method to prepare metal oxide by using alkoxy metal salt or metal inorganic salt.
溶胶-凝胶过程是是一种用金属烷氧化物或金属无机盐在较低温度的条件下制备金属氧化物的方法。
At present, preparation of hybrid material via a sol-gel process has been a hot field in material research.
采用溶胶-凝胶法制备有机-无机杂化材料是近年来热门的研究领域。
Fine mullite powder was synthesized by sol-gel process with tetraethoxysilane (TEOS) and aluminium nitrate as raw material.
以正硅酸乙酯和硝酸铝为原料,采用溶胶-凝胶法制备出了超细的纳米莫来石。
Prepare the TiO2-SiO2 mixed oxide with highly dispersed titanium species through sol-gel process is also a hot research area.
另外,用溶胶凝胶法获得钛离子在硅氧体中高度分散的混合氧化物催化材料,也是一个新的研究热点。
The effect of grain size on high frequency dielectric properties of PbTiO_3 based ceramics prepared by sol-gel process was studied.
首次报道了溶胶-凝胶法制备钛酸铅基铁电陶瓷的晶粒尺寸对其高频介电性能的影响。
The yttrium-stabilized zirconia(YSZ)and strontium titanium(STO)film buffer layers were prepared by Sol-gel process on Si substrates.
采用溶胶-凝胶法在硅基板上先分别制备钇稳定氧化锆(YSZ)和钛酸锶(STO)两种薄膜缓冲层。
We discussed in detail on the usage of sol-gel process in rubber reinforcing, optical materials, functional coatings and other field.
并对溶胶凝胶法在橡胶增强、光学仪器、功能化涂层以及其它领域中的应用进行了具体的讨论。
Organic-inorganic hybrids synthesized by sol-gel process usually exhibited low elastic modulus, high ductility and high mechanical strength.
溶胶-凝胶法制得的有机-无机杂化材料通常显示低弹性模量、高延展性及高机械强度。
The NASICON sensitive materials for ionics sensors were prepared by sol-gel process and the process was compared with the conventional ceramic process.
本文介绍应用溶凝胶工艺制备离子传感器的敏感材料NASICON,并与传统的陶瓷工艺作了比较。
The LiTaO3 thin film was chosen as infrared sensing film and prepared by a sol-gel process using lithium acetate and tantalum ethoxide as starting materials.
用醋酸锂和乙醇钽作为起始反应物,通过溶胶凝胶工艺生成了对红外敏感的钽酸锂薄膜,并详细讨论了基于钽酸锂薄膜的红外探测器件制备工艺。
NASICON was synthesized by using normal reagents as raw material and sol-gel process. Based on the resulted material, the solid electrolyte CO2 sensor was prepared.
以常规试剂为原料,采用溶胶-凝胶法合成了NASICON固体电解质材料,并以该合成材料为基础,制备了小型固体电解质型CO2传感器。
Decoration film on glass surface doped with phthalocyanine blue was prepared by sol-gel process using tetraethoxysilane, isopropanol and water as the raw materials.
采用溶胶—凝胶法,以正硅酸乙酯、异丙醇、水为原料制备了掺杂有机颜料酞菁蓝的玻璃表面装饰膜。
Research of this thesis include two parts mainly, first part include the preparation of SrTiO3 powder materials by sol-gel process and solid phase synthesis process.
本论文的研究主要包括两部分,第一部分为使用溶胶-凝胶法和固相合成法制备钛酸锶粉体材料。
Hydrophobic silica gel was prepared by sol-gel process using tetraethoxy silicone(TEOS) as raw material, then the surface was chemically modified by diethoxydimethylsilane(DDS).
以正硅酸乙酯为原料,经溶胶-凝胶过程制备二氧化硅溶胶,再利用二甲基二乙氧基硅烷(DDS)对其进行改性,制备了疏水性二氧化硅凝胶。
Sol-gel process is combined with polycationics in three different ways and the respective synergetic effect on the color fixing performance of23kinds of direct dyes is reviewed.
考察溶胶凝胶法、阳离子固色法及这3种方法的不同组合对23种直接染料固色效果的影响。
Objective: Aim of this study was to evaluate the effect of silica coating with sol-gel process on bonding strength between glass infiltrated alumina ceramic and resin luting cement.
目的:探讨利用溶胶凝胶法进行纳米硅涂层表面改性对玻璃渗透氧化铝陶瓷粘结强度的影响。
Carbon aerogels were prepared from resorcinol and formaldehyde via sol-gel process, high temperature carbonization and atmospheric pressure drying technology with solvent replacement.
以间苯二酚和甲醛为原料,采用溶胶-凝胶工艺,结合高温碳化和溶剂替换常压干燥技术,制备了碳气凝胶。
The mesoporous nanoparticle TiO_2 is prepared by sol-gel process, and its effect on the degradation rate of phenol under different photocatalytic degradation conditions is investigated.
以溶胶-凝胶法合成中孔纳米二氧化钛,考察不同光降解反应条件下其对苯酚溶液的降解效果。
The present invention belongs to the field of catalyst technology, and is especially nonaqueous sol-gel process of preparing nanometer titania catalyst with visible light catalysis activity.
本发明属于催化剂技术领域,具体为一种利用非水溶胶-凝胶法制备具有可见光催化活性的纳米二氧化钛催化剂的方法。
Preserving gel texture during the drying step, which is one of the main problems of Sol gel process, can make drying gels have a lot of special properties and applications.
在干燥阶段维持凝胶织构可使得干燥凝胶具有一些特殊的性质和用途,也是溶胶-凝胶工艺中的关键问题之一。
A new kind of sol - gel process for preparation of dense UO2 kernels used for HTGR (High Temperature Gas cooled Reactor) has been developed in our institute.
为了制备高温气冷反应堆用燃料芯核,致密uo_2微球,研究了一种新的溶胶-凝胶工艺。
A new kind of sol - gel process for preparation of dense UO2 kernels used for HTGR (High Temperature Gas cooled Reactor) has been developed in our institute.
为了制备高温气冷反应堆用燃料芯核,致密uo_2微球,研究了一种新的溶胶-凝胶工艺。
应用推荐