Setting up and verifying the SNMP agent.
设置和检验SNMP代理。
Publishing information through an SNMP agent.
通过SNMP代理发布信息。
The XC10 v2 SNMP agent also supports communities.
XC10v 2SNMP代理还支持社区。
SNMP agent is an integrated part of router software system.
路由器网管代理是路由器软件系统的重要组成部分。
For this to work, the network element must be equipped with an SNMP agent.
要使用它，网络设备需要装有SNMP代理。
These tools use SNMP over UDP to poll an SNMP agent for device and application metrics.
这些工具通过UDP使用SNMP来为SNMP代理轮询设备和应用程序指标。
The text mainly introduces the realization of the SNMP agent on the Ethernet switch.
本文介绍了基于以太网交换机平台的SNMP代理的实现。
The new SNMP agent runs on the appliance as a background daemon and supports both SNMPv1 and SNMPv2.
新的SNMP代理作为后台守护进程运行在设备上，并且同时支持SNMPv1和SNMPv2。
This will activate the SNMP agent and it will now be listening on the port defined to the right of the checkbox.
这将激活SNMP代理，它将侦听复选框右侧定义的端口。
For computers that expose their status through SNMP, there may be a discrepancy between system and SNMP agent uptime.
对于通过SNMP公开其状态的计算机，系统与SNMP代理正常运行时间之间可能存在偏差。
The following 12 steps show you how to initially set up and verify the SNMP agent on the collector and manager nodes.
下面的12个步骤说明如何在收集器和管理节点上设置和检验SNMP代理。
The SNMP Agent, which is based on the Embedded Micro Internet Technology, has a severe standard of its own power -consumption.
采用嵌入式微型互联网技术的SNMP代理，对其自身的功耗有严格的要求。
The object of this paper is to present the realization of SNMP agent software which bases on WR in this Wireless Self-organized network.
本文讲述了在这个无线自组织网络中管理系统的构建以及WR上的SNMP代理程序的实现。
In effect, the script obtains the value from the SNMP agent, calls the callback function, which then queues up another retrieval in the future.
实际上，该脚本从SNMP代理获得值，调用回调函数，然后回调函数把将来的另一次检索排入队列。
The terminal accomplishs to manage the BPL network equipments by means of the communication between its SNMP AGENT and bridge terminal on MAC layer.
通过运行在网管终端上的网络管理代理（SNMP AGENT）和电力线通信局端设备在MAC层进行信息交互，终端实现了对电力线通信局端设备和用户端设备的管理。
Note, however, the limitation of the uptime described here, which is the information shown in the uptime of the SNMP agent, not the uptime of the entire machine.
但是请注意，这里描述的正常运行时间(即SNMP代理的正常运行时间中显示的信息)不是整个计算机的正常运行时间。
In this paper software architecture of ATM accessing switch is introduced briefly. SNMP agent and other management tools of this architecture are discussed in detail.
本文简要介绍了AT M接入交换机软件的协议结构，详细介绍了在此结构下开发的SNMP网管代理及其管理工具。
The Net-SNMP package provides the tools for querying SNMP agents, and the SNMPD daemon for setting up your own agent on your system for disk, process and other monitoring types.
Net - snmp软件包提供了用于查询snmp代理的工具，以及用于在系统上为磁盘、进程和其他监视类型设置自己的代理的snmpd守护进程。
After discussing the present intrusion detection systems and methods and analyzing their defects, the author presented SNMP agent system based on intrusion status detection.
在分析现有入侵检测方法及其缺陷的基础上，提出了一种基于状态机的入侵检测的SNMP代理方案。
The platform can automatically generate SNMP Agent according to the managed object information models presented by users and offer application programming interfaces to users.
该平台可以根据用户所提供的被管对象信息模型，自动生成SNMP网管代理软件，并为用户提供应用编程接口。
This obtains a number of data points from a specified SNMP agent, including the IP address, description, uptime, and network statistics (packets sent/received, and IP packets sent/received).
这将从指定的SNMP代理获得许多数据点，包括IP地址、描述、正常运行时间和网络统计数据（已发送/接收的数据包和已发送/接收的 IP 数据包）。
When an SNMP client accesses information from the managed device’s agent, it passes the agent credentials as a community name.
当SNMP客户端从托管设备的代理访问信息时，它将代理凭据作为社区名进行传递。
An agent runs on each system and reports information using SNMP to different managing systems.
代理运行在每个系统上，并使用SNMP向不同的管理系统报告信息。
These actions require a combination of DataPower SNMP Trap Event Subscription configuration and configuration of the SNMP monitoring agent in polling and potentially based on returned status values.
这些活动需要在轮询中结合使用DataPowerSNMPTrapEventSubscription配置和SNMP监控代理配置，并且很可能基于返回的状态值。
The SNMP standard does not define what information the agent returns; instead, the available information is defined by Management information Bases (MIBs).
SNMP标准没有定义代理返回什么信息；相反，可用的信息由管理信息库(ManagementInformation Base, MIB)定义。
On the collector node, stop and start the SNMP daemon (also known as the SNMP master agent or snmpd) so that it picks up the configuration changes
在收集器节点上，停止并重新启动SNMP守护进程（也称为 SNMP主代理或snmpd），让它获得新的配置
snmp/peer/snmpdp - This is the PEER Network master agent.
snmp/peer/snmpdp ——这是 PEERNetwork主代理。
A protocol adapter is a software component that provides access to the agent-managed resources through a standardized protocol, such as HTTP and SNMP.
协议适配器是一种软件组件，它通过标准化协议(如HTTP和SNMP)提供对代理管理的资源的访问。
On the collector node, verify that the GPFS SNMP sub-agent is running: ps -ef | grep mmsnmpagentd.
在收集器节点上，检查GPFSsnmp子代理是否正在运行：ps- ef |grep mmsnmpagentd。
On any node in the GPFS cluster, turn on the GPFS SNMP sub-agent: mmchnode — snmp-agent -n [COLLECTOR-NODE].
在GPFS集群中的任意节点上，启动GPFSsnmp子代理：mmchnode——snmp - agent - n [COLLECTOR - NODE]。
应用推荐