Restart xinetd, or send its process a signal to force a reset.
重新启动xinetd,或者向它的进程发送一个重新设置信号。
A signal that is sent to a running process interrupts that process to force some sort of event, typically some action. Signals can come from, but not restricted to.
向正在运行的进程发送信号会中断该进程并强制执行某种事件,通常是某种操作。
The SIGNAL statement is used to explicitly raise an error and force the invocation of a handler.
signal语句用于显式地发出一个错误并强制调用处理程序。
March did provide a faint signal of improvement as the labour force grew 160, 000.
当劳动力增加了160,000时,3月份确实表现出了一个轻微的改善迹象。
The contact force during impact process was measured by force sensor and data signal processing system in real time.
冲击过程中的接触载荷由压力传感器及数字信号处理系统实时测量。
Quartz resonance force sensor is a digital sensor with frequency signal as its output form.
石英谐振式力传感器是一种输出为频率信号的数字式传感器。
Signal separation were completed for the measured force and strain signals, and the strain errors were calibrated.
对测试中所得的力信号和应交信号进行了信号分离,同时,对应交误差进行了修正。
This paper introduces the methods of gathering the signal and data processing when a force is measured by multiple load cells.
本文介绍了用多个力传感器共同实现对一个力负荷进行测试的信号采集方法和数据处理方法。
Electric - machine conversion component is indispensable of the control system of the electric liquid. It transforms the electric signal into mechanical mete - force (moment) and displacement.
电-机转换元件是电液控制系统中不可缺少的部分,它将电信号转换为机械信号-力(力矩)或位移。
The singular index of cutting force signal is proposed as a parameter for detecting cutter's wear.
提出采用切削力信号的奇异性指数作为衡量刀具磨损的参量。
A method of solving the angular speed and attitude angular of high spinning projectile was proposed by accelerometers' specific force signal in existence of installation errors.
研究了存在安装误差时基于加速度计比力信号解算高自旋弹丸角速度和姿态角的方法。
The dynamic properties of ER (electrorheological fluid), such as the damping force response and spectra of damping force, have been studied under the sinuous input excitation signal.
对聚苯胺体系电流变流体在正弦信号作用下的阻尼力响应及其频谱特性进行了理论和实验研究。
Output force phase should be controlled so as to get the far field signal inphase with the output force phase.
为了保证远场信号的相位与激振力的相位一致,应当控制激振力的相位。
The dynamic force generator is based on the vibration exciter which is used as the actuator to get the needed dynamic force with the corresponding signal generator and power amplifier.
测试平台系统的动态力发生装置是利用激振器作为执行器并配以相应信号发生电路和功率放大器来实现梯形动态力。
The monitoring of milling tool breakage using vibration displacement signal is studied in detail. A mathematical model of the milling force is established.
对振动位移信号用于铣刀破损监测进行了详细的研究,建立了铣削过程的切削力模型;
Methods Strain gauges are used to convert the force into an electric signal.
方法利用应变片将力信号转化为电信号。
The structure design and the installation location of the piezoelectric force transducer and the critical issues in vibration signal detection are expounded.
重点阐述了该压电式力传感器的结构设计、安装位置设计及振动信号检测中的关键问题。
Simulation results show that the servo system has high stability and can trace step, sine and ramp force signal with high precision. It is significant to developing the pneumatic servo system.
仿真结果表明,系统稳定性高,能够较好地跟踪阶跃、正弦和斜坡等典型力信号,对常规气压伺服技术应用领域的拓宽具有重要的理论和实际意义。
So we make the frequency of the linearization signal change with the frequency of the missile's autogiration. Then the linearity of the average control force can be improved.
因此,让线性化信号频率随弹旋频率的变化而变化,从而改善平均控制力的线性度,提高控制精度。
In the strain-data measured experiments of material of mechanics, the bar generates weak strain signal by the less force functioning on the bar.
材料力学应变测量实验中,试件在小负荷作用下所产生的应变信号十分微弱。
Relative deviation of the force transducer's output signal with measuring force as a result of lateral force at 10% of the measuring force.
在测量力10%的侧力作用下力转换器的输出信号与所测力之间的相对偏差。
Then, wavelet packet was used to decompose and de-noise the milling force signal, as well as extracts the signals 'energy characteristics as import vectors of BP Neural Network.
然后,采用小波包对采集的铣削力信号进行分解和消噪处理,并提取其能量特征作为BP神经网络的输入向量。
This design method can improve dynamic and static characteristics of system by collecting bending force signal, summarizing experience and designing control rule.
通过采集弯曲力的变化信号,总结弯曲经验,制定控制规则,改善了系统的动静态特性。
In any case, for the signal to pass through with minimal alteration, the contacts within the connector must maintain good contact force and resist corrosion over the life of the contact.
在任何情况下,对于需要传递而只允许最小限度变异的信号而言,连接器内的触点必须接触良好并能在接触期间抵抗腐蚀。
Transforming the output of frequency to the magnetic field through the feedback of Lorentz force, this device was capacitively excited and the signal was capacitively detected.
采用静电激励和静电检测,通过罗伦兹力的反馈将磁场的大小转变为频率输出。
Transforming the output of frequency to the magnetic field through the feedback of Lorentz force, this device was capacitively excited and the signal was capacitively detected.
采用静电激励和静电检测,通过罗伦兹力的反馈将磁场的大小转变为频率输出。
应用推荐