The die structure combined advantages of the side core-pulling and lifter body.
着重介绍了模具的抽芯结构，并对抽芯力及斜导柱进行了核算。
A new way of the design for plastic mould with side core-pulling and the similar products I...
本设计为类似产品及侧抽芯塑料模具的设计提出了一条新思路。
The design of the side core-pulling delay mechanism is stated in detail, The open-close action of the mould is simulated.
本文对延时侧抽芯机构设计作了详细阐述，并模拟了模具的开合运动。
The difficulty in the mould design is how to form a number of apertures in four side face by side core-pulling mechanism.
该模具设计的难点是四个侧面都需要通过抽芯成型多个侧孔。
At the same time, introduce the principle of side core-pulling mechanism of gear and rack injection mold, and design gist of a rack.
掌握长抽距或斜抽芯塑件的结构工艺分析及抽芯距、抽芯力的计算，齿轮、齿条注射模侧向抽芯机构的原理和齿轮、齿条设计要点尤其关键。
Using the side core-pulling mechanism and new orientation style of activity core to ensure the accuracy of hole locations, the qualified products can be produced.
采用了侧向抽芯机构、活动型芯的新型定位方式，保证了孔的位置精度，可生产合格的产品。
Through analyzing on the product structure, designed a simple and workable mold with half structure to solve the side core-pulling problems, simplified mold structure and saved mold cost.
通过对产品的结构分析，设计一种简单可行的哈夫结构模具，以解决侧向抽芯的问题，简化模具结构，节省成本。
Designing injection moulds for complex construction of plastic parts is a challenge; here is an example where conventional side core-pulling mechanism is unable to meet the requirement of forming.
塑料制品的复杂化给成型模具的结构设计带来困难，对于特殊塑料制品采用原有的侧抽芯机构难以满足塑件的成型要求。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
介绍大屏幕彩色电视机前壳注射模结构，重点介绍侧抽芯大滑块的设计，顶出机构和进浇方法的改进。
In accordance with the characteristics of 2-dimensional core pulling of product, the side parting surface and core pulling structure of mould was designed by means of comparison and analysis.
针对制品两面抽芯的特点，通过比较分析制定了模具的侧向分型与抽芯结构形式。
Difficulty lies in mold design several key parts of the core pulling, this USES a bevel pillar core-pulling mechanism, and side slider pulling mechanism and so on.
模具设计的难点在于几个关键部位的抽芯，在此采用了斜导柱抽芯机构、和侧滑块抽芯机构等。
The contractile interior core pulling mould structure was designed for the molding of the concave part of inner side of outer casing of flow meter.
为成型流量计外壳内侧凹进部分，设计了收缩内抽芯模具结构。
The side core - pulling constituted a key factor in the design of injection molds.
对塑料件侧向抽芯的特点进行总结。正确选择侧向抽芯方法是注射模设计的关键。
The side core - pulling constituted a key factor in the design of injection molds.
对塑料件侧向抽芯的特点进行总结。正确选择侧向抽芯方法是注射模设计的关键。
应用推荐