• The die for the blanking under the radial clamp of nuts for 1C engine is designed based on The effect of radial stress on the shearing method for bars and the fracture shape.

    根据应力方式及其断口形状影响设计了螺帽锻造所用热轧棒料能进行精密剪切新型结构的径向支持下料模具

    youdao

  • A new experimental scheme of measuring lens focal length has been put forward on the basis of the improved laser plate shearing interference method.

    本文改进激光平板剪切干涉基础提出测量透镜焦距一种新的实验方案

    youdao

  • The results are given by applying the method to processing a practical shearing interferogram.

    给出方法用于实际剪切干涉图数据处理的结果

    youdao

  • This method is realized by using laser grating shearing interferometer and Talbot effect.

    这种方法利用激光光栅剪切干涉仪塔宝效应实现的。

    youdao

  • The paper analyzes mechanism of action and load transfer under group anchor, calculates load transfer-displacement by shearing displacement-transfer function method.

    通过对作用作用机理荷载传递进行分析使用剪切位移—传递函数进行荷载传递位移计算

    youdao

  • The interaction between two parallel cracks in rock mass under the combined action of tension and shearing is analyzed by finite element method.

    采用有限元法,岩体综合作用平行裂纹相互影响的情况进行了计算

    youdao

  • This paper discussed the adaptation of VME machine and the seleted method, sachas shearing and cutting mode of the solution salver on its mixer.

    讨论VME型真空制膏的使用适应性设备搅拌器溶解盘剪切方式选择方法

    youdao

  • Meanwhile, a non deformable, double directional cutting method for shearing tube was pointed out.

    同时进一步提出钢管变形剪切方法双向切割法。

    youdao

  • By analyzing technological process and combining technological requirements of synchronism shearing, the designing method of the intellect controlling system imitating human was put forward.

    通过分析塑料瓦楞板同步剪切工艺过程结合工艺要求提出仿智能控制系统设计方法

    youdao

  • In order to make strength analysis, analog conversion method was used to obtain the shearing force, which could not be determined on the shearing machine directly.

    为了进行强度分析,文中在剪切获取采用模拟转换方法从而解决了剪切机上不能直接得到剪切力的困难。

    youdao

  • Besed on theoretic analysis of tube shearing, this paper mainly discusses the design principles and method of tube shearing blade and briefly introduces the design of section shearing blade.

    在对工艺作详细理论分析基础重点介绍剪切圆管的刀片设计原理方法简要介绍了剪切型材的刀片设计。

    youdao

  • According to two conditions, shearing deform and compress deform, the paper put forward the method of sectional numerical plug and reconstruction of mesh motion.

    根据网格扭曲两种情形剪切扭曲压缩扭曲,提出网格运动局部线性插值重构方法

    youdao

  • On the basis of load transfer mechanism and destruction patterns of single pile, load transfer method and shearing deformation method for subsidence computing of single pile are mainly discussed.

    分析载荷传递机理、单桩的破坏模式的基础上,重点探讨了单桩沉降的载荷传递剪切变形法。

    youdao

  • A new method for focal length measurement is presented based on the self-reference single plate shearing interferometric technique and compensation of spherical mirror.

    基于球面补偿原理参考单板剪切干涉技术提出了一种测量焦距方法

    youdao

  • A new experimental method for measuring resonant frequencies of objects is proposed by use of rotating shearing stroboscopic speckle interferometry.

    提出一种测量物体固有频率方法———旋转剪切散斑干涉法

    youdao

  • A new method for analyzing shearing and radial stresses in curved beams is put forward in this paper.

    给出计算曲梁剪应力径向应力一种方法,即直接对剪应力积分方程进行求解。

    youdao

  • The strength of oblique edge shear is analyzed by three dimension finite-element method, through which provides scientific basis for increasing shearing capability.

    有限元剪切机机架强度进行分析,提高剪切机剪切能力提供了理论依据

    youdao

  • Followly, the bending rigidity and transverse shearing rigidity of one-way bamboo-stripe laminates applied to shipbuilding has been measured practically with this method.

    方法实测了造船工业用单向竹蔑积成胶合板的弯曲刚度横向剪切刚度。

    youdao

  • On this basis, the simplified tri linear analytical method to determine bi directional shearing capacity is presented afterwards and the error of this method is given.

    同时本文作者提出双向承载力折线简化计算方法简化计算方法的误差进行了分析。

    youdao

  • Now, the most universal and effectual method that used to get shearing data from the Marine vertical profiling is using vertical profilers associate with airfoil probes.

    使用搭载剪切流传感器海洋湍流垂直剖面仪进行测量,当前普遍最有效获取海洋垂直剖面微尺度湍流数据方法

    youdao

  • Both theory and experiments show that stroboscopic shearing speckle interferometry is obviously superior to time-average method.

    理论实验表明频闪剪切干涉照相优于时间平均剪切散斑干涉照相法。

    youdao

  • Based on dissipation mechanism of shearing power, a new method of modeling dynamic viscosity of polymer melts in vibrating shear flows was proposed in this paper.

    基于剪切功率耗散机理,提出了计算振动剪切聚合物熔体动态黏度的粘性耗散,并建立了理论模型

    youdao

  • The result showed that the dynamic analysis method is effective in practice to determining the resistance to shearing of slipping plane of rock mass slope.

    结果表明分析方法获得岩体斜坡滑动强度最经济、合理途径。

    youdao

  • The effect of shearing lag on lateral stability of thin-walled open member is studied by a simple method with sufficient accuracy.

    提出一种简单足够精度方法,以探讨开口薄壁杆件杆壁中面上的应变引起的剪力滞后现象其侧向稳定影响

    youdao

  • Ductile damage mechanics model and rigid finite element method was adopted to simulate the sheet metal shearing process.

    应用韧性损伤力学模型以及刚塑性有限元,分析了金属板材剪切断面变形的过程

    youdao

  • A new method for computing shear strength of reinforced concrete flat plate without shear reinforcement while transferring shearing force only is presented herewith.

    提出了无剪切钢筋钢筋混凝土平板传递剪力,其抗剪强度计算方法

    youdao

  • At present, all internal and external technical standards adopt the concept and method of average shearing stress for engineering design. This may cause disadvantage and potential risk.

    目前国内外技术标准均按平均剪应力概念方法进行设计存在严重不合理性潜在危险性

    youdao

  • This paper discusses how to use bottom shearing stress method to determine the resuspension rate and deposition rate, and how to select and calculate the correlative parameter.

    论文如何利用床面应力方法确定沉积冲刷率以及如何计算选取水沙计算过程中其它相关参数展开了初步的探讨。

    youdao

  • This paper discusses how to use bottom shearing stress method to determine the resuspension rate and deposition rate, and how to select and calculate the correlative parameter.

    论文如何利用床面应力方法确定沉积冲刷率以及如何计算选取水沙计算过程中其它相关参数展开了初步的探讨。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定