The frame-supported shear wall structure is a combination of frame and shear wall.
框支剪力墙结构体系是将框架结构和剪力墙结构相结合的产物。
The results of this thesis can provide some reference for the analysis and designing of the frame-supported shear wall structure.
本论文的分析结果，为框支剪力墙结构的分析和设计提供了一定的参考。
This paper briefly introduces the structure, the characteristic and the construction technology of a new compound reinforced concrete shear wall frame—CL structure system.
介绍了一种新型复合钢筋混凝土框架剪力墙结构体系—CL结构体系的构造、特点及施工工艺。
The structural analysis, construction measurement and construction method of frame shear wall structure modification are elaborated.
阐述了框架—剪力墙结构改造中的结构分析、构造措施以及施工方法。
Through comparing the results between ANSYS and TBSA, a designing software, summarized some questions that we should pay attentions when designing the frame-supported shear wall structure.
通过对有限元分析软件ANSYS与工程设计软件TBSA计算结果的比较，总结出在框支剪力墙结构设计中应该注意的一些问题。
This engineering is eleven layer reinforced concrete frame shear wall structure.
本工程为十一层钢筋混凝土框架-剪力墙纸局。
Frames, shear wall, frame shear wall, frame tube and tube structures are included.
这些结构包括框架、剪力墙、框一剪、框筒和筒体结构。
As two bottom stories of frame shear wall in commercial building, the methods of anti earthquake design of upper laying structure were not dealed with in code.
作为商住楼的底部二层框架—剪力墙、上部砌体结构的抗震设计方法，在规范中并无涉及。
The general principle of frame shear wall structure design, selection of floor architecture, beam column layout, etc. are described.
介绍框架-剪力墙结构设计中的一般原则、楼面体系的选用、框架梁柱布置等问题。
Two new analytic methods of tall frame - shear wall structure are presented in this paper.
本文提出了两种高层框架—剪力墙结构的分析方法。
Furthermore, shear wall structure can be treated as a special case of wall-frame structures.
另外，剪力墙结构也可以当作是框-剪结构的一种特殊情形来加以分析。
The key point of design of the short shear wall bearing frame structure system is discussed. And the design could be referred to the similitude engineering.
论述了短肢剪力墙框支结构体系设计要点，为相似工程提供设计参考。
Minimum shear force required in the design of frame in frame-wall structure and necessity of story beam in shear wall are discussed.
分析了框剪结构中框架承担的最小地震剪力及框剪结构中剪力墙设楼层梁问题。
In shear wall structure and frame - shear wall structure the percentages are very close, they are all 32%.
剪力墙和框架一剪力墙结构相差不多，均为32%左右。
The frame shear-wall system is adopted in design.
工程结构采用了框架-剪力墙体系。
This method can be used to analyze shear wall structures with elastoplastic hinges or dampers as well as tall frame-type structures.
用本文的方法可以计算具弹塑性铰或弹塑性耗能器之剪切墙及框架式高层建筑结构。
For the frame-wall structure system, the seismic story shear of frame will change along with stiff degenerating of wall.
对于框架—剪力墙结构体系而言，随着剪力墙的刚度退化，框架的地震层剪力会不断变化。
This paper presents a method for predicting seismic damage of reinforced concrete frame-shear wall structures. The method can also be used for frame structures and shear wall structures.
本文提出了框-剪结构震害预测方法，并使框架、框-剪和剪力墙三种结构体系的震害预测统一起来。
Short-leg shear wall structure system has the advantages of frame structure and shear wall structure.
短肢剪力墙结构体系兼有框架结构和剪力墙结构的优点。
In accordance with the characters of composite masonry structure building supported by frame shear wall with wide bay at bottom, a sub structure pseudo dynamic test was carried out.
针对底层大开间组合墙房屋的特点，对模型房屋进行了子结构拟动力试验，测定其抗侧刚度，发现了抽柱对结构性能的重要影响。
In recent years, the steel frame-shear wall structure system to get the more and more extensive application in our country.
近年来，钢框架-剪力墙结构体系在我国得到了越来越广泛的应用。
The structural behaviors under vertical and horizontal loads are analyzed with a steel frame model and an equivalent reinforced concrete frame-shear wall model respectively.
用纯钢框架模型和等效钢筋混凝土框架剪力墙模型分别计算结构在竖向荷载及侧向荷载组合下的受力性能。
The rigidity of shear wall linked with the ground is an important factor in influencing the safety and economic of the shear wall structure supported on frame-shear wall structure.
落地剪力墙刚度是影响框支剪力墙结构安全性和经济型的重要因素之一。
Quantity of earthquake resisting wall setup in frame-shear wall structure is key whether or not structure is safety, economy and reasonable.
框架—抗震墙结构中抗震墙设置数量的多少是框架—抗震墙结构体系是否安全、经济、合理的关键。
Hot-rolled seamless steel tube column, as the main vertical load-bearing member, plays the role of structure transferring between the cast RC frame shear wall and the steel roof truss.
以热轧无缝钢管柱为主要竖向承重结构构件，承担现浇钢筋混凝土框架剪力墙结构与钢屋架之间的结构转换作用。
Tie beam is an important element in frame-shear wall structure.
连梁在框架-剪力墙结构中，也是很重要的一个构件。
As a new structure system, the short-leg walls system has the characters of both frame-structure and shear-wall structure, but it also has some new characters of its own.
短肢剪力墙结构体系作为一种新型的高层结构体系，其在结构性能方面既具有框架和剪力墙结构的双重特点，又有区别于框架和剪力墙的许多新特点。
In this paper, the seismic reduction effectiveness and earthquake response of building with a twelve stories frame-shear wall structure adopting base seismic isolation is studied.
本文以一幢十二层框架—剪力墙结构作为研究对象，探讨采用基底隔震技术后的减震效果及其地震反应的特点。
The structure is divided into the upper frame structure and the lower frame-shear wall structure under the lateral earthquake action.
基于对框架剪力墙体系的认识，分析了上部框架-下部框架剪力墙结构在水平地震作用下的变形。
The paper puts forward a kind of calculating method for displacement, internal force and interaction of high-rise frame-shear wall structure under lateral load by using continuity method.
提出一种采用连续化方法对高层框架—剪力墙结构在侧向荷载作用下的位移、内力及相互作用的计算方法。
应用推荐