In dealing with the cracking of steel fiber concrete element, the stress release factor and shear transfer coefficient are introduced.
在钢纤维混凝土单元开裂处理中，引入应力释放因子和剪力传递因子。
The joints between the central slab and the four side slabs can be specified either by an efficiency of shear transfer or by the size and spacing of dowel bars.
中心板与四块边板之间的联系可以由剪力传递效率，或者由传力杆的尺寸和间距来表示。
The experiment and analysis results show that frame model with truss transfer storey has partial bending shear deformation.
试验和分析结果表明：带桁架转换层框架呈局部弯剪型的变形特性。
Shear displacement transfer characterised via separate analysis of side friction and tip resistance, and then associating them through displacement coordination.
剪切位移传递法的主要特点是将桩侧摩阻力与端阻力分开考虑，通过位移协调将二者再联系起来。
The traditional shear lag theory of stress transfer in short fiber reinforced metal matrix composites was modified and improved.
对短纤维增强金属基复合材料应力传递的传统剪滞理论进行了修正和改进。
The results clearly illustrate the load transfer mechanism in the deep pile cap and the subsequent failure mode of two-way shear.
结果清楚地显示，深承台板的载荷传递机制与相应的双向剪切破坏模式。
In addition to vertical shear force, slab-column connections also have to transfer unbalanced moment due to combined vertical and lateral forces as a result of wind effect or earthquake excitations.
在风荷载或地震荷载等水平荷载及竖向荷载共同作用下，板柱节点除了要传递垂直剪力外，还必须传递较大的不平衡弯矩。
Shear stress would be released at the damaged points and transfer to the crack tips.
损伤的产生使得应力在损伤点得以释放，并转移到其前端未损伤的接触单元上。
It can transfer shear to the base from the column baseplate.
能满足钢结构柱脚向基础传递较大水平力的要求。
Silicone oil fan clutch is a new kind of transmission device using viscous shear force of silicone oil to transfer torque, which is widely used in engine cooling systems.
硅油风扇离合器是利用硅油的粘性剪切力来传递力矩的新型传动装置，它在不同的发动机冷却系中有着广泛的应用。
Considering gravity, interfacial shear stress, surface tension and interfacial thermal resistance, the analysis model for annular flow condensation heat transfer in microtube was presented.
本文提出了微圆管内环状流凝结换热的分析模型，考虑了重力、汽液界面剪切力、表面张力以及界面凝结热阻的作用。
This low speed agitator is good for shear sensitive products. Bottom & side blades enhance rapid heat transfer reducing local burn-on or freeze-up of product on tank walls.
这种低转速搅拌器是剪切敏感产品的理想选择。底部和侧部刀片提高快速传热，减低罐壁产品的烧伤或冻结。
The load transfer characteristics of rock-socketed pile are mainly decided by the shear behavior of rock-concrete interface.
嵌岩桩的荷载传递特性主要取决于混凝土—岩石界面的剪切特性。
The transfer matrix method for the bending and stability of the variable section beams with shear deformation is presented.
提出了考虑剪切变形时变截面梁弯曲和稳定计算的传递矩阵法。
The shear stress at the liquid-gas interface plays an important role on characteristics of the hydrodynamics, flow stability and heat transfer of liquid film.
气液界面存在同向或反向切应力时，在一定程度上影响到液膜的水动力学特性和流动稳定性，并改变其热质传递特性。
Prosthesis force includes normal stress and shear stress. The normal stress is beneficial to prosthesis fixation and force transfer, while shear stress may cause prosthesis loosening.
假体受力可以分解为正应力和剪切应力两部分，正应力有益于假体的固定和力的传递，而剪切力会导致假体松动。
The momentum transfer at the main channel flood -plain interface can be described as an apparent shear stress which can be quantified as a function of the local turbulence at the interface.
将滩槽交界的动量传递描述为一表观应力，这个表观应力可以看作是交界面处的脉动函数并将其定量化。
Mass transfer rates and wall shear stresses are measured by the electrochemical method.
传质速率及壁面剪切应力的测量采用电化学方法。
Results The bioreactors with different mechanical properties, mass transfer and fluid shear stress had different impacts on morphological and functional organizations.
结果：不同类型的生物反应器及其机械性能、传质以及流体剪应力等对细胞培养组织的形态和功能产生的影响不同。
The cocurrent shear plays the roles on thinning film thickness and enhancing heat transfer, and the countercurrent shear has inverse effect.
同向切应力具有减薄液膜厚度和增大传热系数的作用；
In this paper, the stiffness matrix and the loading transfer matrix of frame element with turn elastic connections is deduced, the cross shear effect has been taken into consideration simultaneously.
作者推导了具有转动弹性连接的杆单元刚度矩阵和荷载转移矩阵，其中考虑了横向剪切效应。通常的两端铰接、两端刚接或一端铰接、一端刚接的杆元刚度矩阵只是作者所推导的刚度阵的一些特例。
The concrete transfer beam applies laminated beam in construction, and because of the constraint of earlier pouring concrete to later pouring concrete, shear stress is induced in lamination.
混凝土转换梁采用叠合梁的施工方法，由于先浇混凝土对后浇混凝土的约束，使叠合面产生剪应力。
The concrete transfer beam applies laminated beam in construction, and because of the constraint of earlier pouring concrete to later pouring concrete, shear stress is induced in lamination.
混凝土转换梁采用叠合梁的施工方法，由于先浇混凝土对后浇混凝土的约束，使叠合面产生剪应力。
应用推荐