When the devices are clocked, data is shifted toward the serial output QH.
当器件的时钟频率，数据是转向了串行输出齐晖。
Intelligent instruments, a variety of display functions, large capacity storage, standard serial output, with strong expansion.
智能化仪表，多种显示功能，大容量存储，标准串行输出，具有强劲扩展功能。
A synchronous motor Angle encoder with low cost, high practicality and RS-232 serial output interface based on PIC16F874 MCU is introduced in the paper.
本文基于PIC 16f874单片机，介绍了一种低成本、实用性强并提供RS- 232串口输出的高精度同步机角度编码器。
Mode of serial port pair: synchronous clock device through the serial port read per second pair a serial output time information, serial port and RS232 interface and RS422 interface.
串行口对时方式：装置通过串行口读取同步时钟每秒一次的串行输出的时间信息对时，串行口又分为rs232接口和RS422接口方式。
Connect the USB or RS232 output directly to the serial port on your PC or Laptop, or by dial-up connection through modems.
连接usb或rs232直接输出到您的电脑或笔记本电脑，或通过调制解调器拨号连接的串行端口。
By using the serial data output, drivers can be cascaded for interface applications requiring additional drive lines.
通过使用串行数据输出，驱动器可级联需要附加驱动线路的接口应用。
A multiplex control system based on serial entry and output in series-parallel mixed mode is designed.
设计一种以串行输入为基础，串并混合方式输出的多路控制系统。
This paper introduces methods and techniques to realize FX2 serial PLC pulse output, which has practical value.
介绍了FX2系列PLC脉冲输出的几种方法和技巧。这些方法和技巧具有实用价值。
The LTC6915 is a precision programmable gain instrumentation amplifier with rail - to - rail output. The gain can be programmed to 14 levels through a parallel or serial interface.
LTC 6915是具有14级可编程增益的仪表放大器，采用轨对轨输出，其增益可通过串行或并行接口方便设置。
For practical use, it presents the application of AD9852 technology in the serial port and the result of its output signal is managed.
并从实际应用出发，给出了AD 9852在串口中的应用，以及输出信号的处理结果。
This research works out a design of signal adaptor circuit of serial communication port between PLC and PC, including input interface circuit and output interface circuit.
设计了PLC与PC机串行通讯口之间信号适配器硬件电路，包括输入接口电路、输出接口电路。
The function of the single-direction shift register which is serial input and parallel output is mainly studied.
研究了串行输入，并行输出单向移位寄存器的功能。
The paper concludes that the "transient saturation" phenomenon can happen when optocouplers are used in serial communication port and binary output port.
光耦器件用于串行口、开关量输出等回路时也存在上述现象。
The shift register's function is completion of parallel data input into serial data output. The design of shift register is an important part in the realization of CRC code.
在串行CRC编码实现中，移位寄存器主要完成将并行输人数据转换成串行输出数据的功能，是整个设计的重要组成部分。
Serial transmission protocal of 3-wire model with tolerable error ability, the method of transition to save electricity state and time control output realization is also described.
在此基础上，成功地给出了具有容错能力的三线制串行传输协议、省电模式转换方法及时间控制输出的实现方案。
Output power and frequency channels are easily programmable by use of the 3-wire serial interface.
通过3线串行接口，可以很容易的利用程序对输出功率和通信频道进行配置。
The output data is accessed from the output register through a serial or parallel port. This offers easy, high speed interfacing to modern microcontrollers and digital signal processors.
输出数据通过串行或并行端口从输出寄存器中存取，这可实现与现代微控制器和数字信号处理器的轻松、高速接口。
Writes data to the serial port output buffer.
将数据写入串行端口输出缓冲区。
This paper presented the design thoughts and character of digital control current regulators, using 8bit digital signal of DAC serial input data and about 2a supreme output current.
简述了以串行方式输入8位数字信号、最大可控电流为2A的数控恒流器件的设计思想和性能。
Functions including control, serial communication and alarm are enabled with buttons and PLC output port on the instrument panel.
该仪表通过外部按钮或PLC输出接点可实现对仪表的控制、串行通信和报警等功能。
Connect the RS232 output directly to the serial port on your PC or Laptop, or by dial-up connection through modems and phone lines.
连接rs232输出直接向您的PC或笔记本电脑，或通过拨号调制解调器和电话线连接的串行端口。
The serial digital temperature sensor MC74 is the high precision IC. It has many characteristics, such as low cost, high precision, serial linear output etc.
MC74型串行数字温度传感器具有价格低、精度高、串行线性输出等优点。
The driving component includes: a N-bit serial buffer, a K-bit extension buffer, a N-bit video data buffer and N driving current output ports.
该驱动元件包括：一N个位的串序缓冲器，一K个位的延伸缓存器，一N个位的影像资料缓存器，N个驱动电流输出端口。
The controller main-board is designed with TMS320F2812 as its CPU, and also sets the serial interface and input and output of the switching value on it .
利用TMS320F2812作为CPU设计了控制器主板，同时引出了串口和开关量输入输出模块。
Transformation between 5v logical and RS-232 Many micro-controllers have asynchronous serial ports, but their input and output rather to use 5v logic than to RS-232 voltage.
在5V逻辑和RS- 232之间转换很多微控制器有异步串口，但是它们的输出和输入使用5 V逻辑而不是使用RS - 232电压。
Texas Instruments TLC5615 for U. S. products introduced in 1999, is a serial interface of the DAC, the output voltage type, maximum output voltage is twice the reference voltage value.
TLC5615为美国德州仪器公司1999年推出的产品，是具有串行接口的数模转换器，其输出为电压型，最大输出电压是基准电压值的两倍。
The DC voltage of each serial module can be boosted based on the battery output voltage and the parallel connection of battery groups is allowed.
系统中每个串联单元的直流电压可在电池组端电压的基础上进一步提高，并允许多组电池并联接入。
The DC voltage of each serial module can be boosted based on the battery output voltage and the parallel connection of battery groups is allowed.
系统中每个串联单元的直流电压可在电池组端电压的基础上进一步提高，并允许多组电池并联接入。
应用推荐