The data are loaded through simulating serial data transmission by I/O interface.
热敏打印头采用I/O口模拟串行数据传输实现数据加载。
This paper gives a serial transmission method which bases on the I2C BUS and its division. Wehave effectively solved the data delay in high speed serial data transmission system.
本文提出了一种基于I2C总线及其分割技术的串行传输方法，可有效解决高速串行传输系统中的数据延迟问题。
In high-speed serial links, equalization techniques can effectively improve the data rate or increase the transmission distance.
在高速串行链路中，均衡技术可以有效地提高数据速率或增加传输距离。
CommPort is the data transmission channel between PC and the outside serial equipment.
串口是常用的计算机与外部串行设备之间的数据传输通道。
With the serial communication it realizes the semiduplex wireless transmission, adapts to wireless data acquisitions of low power and short distance, and resists disturbance well.
以串行通信方式实现采集数据的半双工无线传输，适合于低功耗短距离无线数据采集，并具有抗干扰能力强等优点；
Using single chip as the core, the paper studies a way to realize multiplex low speed data serial transmission, presents hardware connection chart, expounds work principle and software design idea.
以单片机为核心，研究多路低速数据串行传输的一种实现方法，给出硬件连接图，阐述各部分工作原理及软件设计思路。
Serial data communication has gained wide application in network transmission, backplane transceiver and I/O interface.
串行数据通信在网络传输、背板连接和I/O接口等领域应用非常广泛。
If transmission line occurs fault, the system is started, then transmits the acquired fault point data to PC by USB serial port in order to process.
当输电线路发生故障时，启动测距系统，将采样得到的故障数据通过US B串行端口上传到PC机，进行数据的浅析浅析处理。
Take GC-06 blue tooth receive module, SD storage card and RS232 serial communication connection as data transmission connection.
以GC - 06蓝牙接收模块、SD储存卡和RS232串行通讯接口为数据传输接口的蓝牙接收装置设计。
This paper introduces an extended serial communication technique using 89C2051. It can provide I/O FIFO of high capacity. Data are pretreated before transmission.
介绍了一种用单片机（89C2051）实现的异步串口扩展技术，这种方法成本低，可以提供大容量的输入输出FIFO，而且对传输的数据有预处理能力。
Abstract: RS-485 serial communication ensure the transmission data quickly, steadily and further, which has been used to the industry control more and more.
摘要：RS- 485串行通信能够保证快速、稳定、远距离地传输数据，已经越来越多地应用于工业控制。
Data transmission between PC and PC or PC and port to use serial communication and parallel communication two communication modes.
PC与PC或PC与端口之间的数据传输能够使用串行通讯和并行通讯二种通讯方式。
In addition, this system can also be through the serial communication circuit for data transmission over a long distance.
另外，本系统还可通过串行通信电路对数据进行远距离传输。
A new kind of electronic and mechanical antitheft lock using digital code based on the technologies of PIC single-chip microcomputer, serial communication and wireless data transmission is introduced.
本文介绍了基于PIC单片机、串行通信技术和无线数据传输的新型数码防盗电子机械锁的设计。
Adoption of MODEM as an embedded system for transmission of data MODEM, MODEM and MCU through serial connections, the real-time transmission of data.
方案采用一个嵌入式的MODEM作为系统传输数据的MODEM, MODEM和单片机通过串口连接，实现数据的实时传输。
It is proved in practice that for the data acquisition system of protective relaying testing instrument replacing the serial transmission by USB communication is imperative.
实践证明，在继电保护测试仪的数据采集系统中用usb传输取代串口传输是势在必行的。
The multimedia timer and multithread technique were used to solve the high speed data transmission in serial port system and data communication in multi-serial port system.
采用多媒体定时器以及多线程技术，实现高速下数据在串口系统中的传输以及多串口数据通讯问题。
Methods an ARM embedded system was used to achieve data transmission by implementing serial communication with GPS module, Beidou receiver and wireless digital broadcasting station.
方法：采用ARM嵌入式系统，并与G PS模块、北斗接收机和数传电台进行串口通信，实现数据的传输。
Serial communication was used in the data transmission of MCU and MCU, MCU and peripheral hardware.
串行通信用于MCU与MCU以及MCU与外设之间的数据传送。
The use of computer data transmission, the commonly used is the serial communication.
计算机进行数据传输时，常用的是串行通信方式。
This paper introduce a hardware design is simple, reliable wireless data transmission serial communication system design and implementation.
本文介绍了一种硬件设计简单、数据传输可靠的无线串口通信系统的设计与实现。
Industry data can be two-way wireless modem to transmit digital, analog, serial and can data transmission distance can reach 300m.
工业的数据无线调制解调器可以双向传输数字、模拟、串行和CAN数据，传输距离可达到300m。
As shown by the results of experiments, the communication procedures worked out between SW MODEM and computer serial port can realize data transmission in factual channel.
实验结果表明：编制短波MODEM的通信程序，实现实际信道数据对通，解决了短波数传中存在的几个问题。
Objective Making use of serial transmission technology and database technology, to connect the laboratory equipment with LIS, thus to realize automated data collection and data management.
目的利用串口技术和数据库技术，将酶标仪等检验仪器与LIS系统连接，实现计算机自动采集检验数据、管理检验数据。
The data transmission in confocal scanning imaging system can be realized through the serial port communication technique.
共焦扫描成像系统的数据传输可以采用串口通信技术实现。
SPI and USB serial buses are used to realize data transmission through wireless receiving modules and computer communication.
并利用单片机的SPI和US B串口总线分别实现无线接收模块数据流传输及计算机的通信。
SPI and USB serial buses are used to realize data transmission through wireless receiving modules and computer communication.
并利用单片机的SPI和US B串口总线分别实现无线接收模块数据流传输及计算机的通信。
应用推荐