Secondly, in the elastic kinematics simulation, the tire as a rigid body, without considering tire stiffness, which is a factor of error.
其次,在弹性运动学模拟中,把轮胎视为一个刚性体,没有考虑轮胎刚度,这也是产生误差的一个因素。
This paper combines theoretical mechanics with computer, takes rigid spheres as an example to introduce the step and method of physical movement simulation of multi rigid bodies.
该文将计算机科学与理论力学相结合,以刚性球体为例介绍了多刚体物理运动仿真的步骤和方法。
The method and step of physical movement simulation of rigid body in real time are stated with geostatics and computer technology.
将刚体力学与计算机技术相结合,介绍了对刚体的物理运动进行实时模拟的方法和步骤。
It is also an extension for the application of rigid viscoplastic finite element method and numerical simulation.
本文的研究拓宽了刚粘塑性有限元及数值模拟技术的应用范围。
With the consideration of surface tension the boundary integral method and numerical solution method for simulation of a cavitation bubble collapsing near a rigid wall are derived.
导出了考虑表面张力影响下模拟固壁附近溃灭空化气泡特性的边界积分方法及数值求解方法。
Based on the application of ADAMS in the analysis of multi-rigid (deformable) -body system, ADAMS is applied to parameterized design and simulation of a planar parallel manipulator 3-rrr.
基于ADAMS软件在多刚(柔)体系统分析中的应用,将ADAMS软件应用于平面3 -RRR并联机器人的参数化设计与仿真。
The results of computer simulation of a two-rigid-body system with two degrees of freedom of each rigid body show that the method presented in the paper is feasible and effective.
通过一个各有二自由度两刚体系统的计算机仿真识别,结果表明文中所述识别理论和方法是正确和有效的。
The result is coherent with the result of quantitative physical simulation, numerical value simulation and the tension stress theory of a rigid plastic mechanical model.
结果与定性物理模拟、数值模拟及刚塑性力学模型的拉应力理论相吻合。
First of all, numerical simulation of two-dimensional rigid main beam cross-section of the single beam gantry crane is carried out with five turbulence models.
本文首先将单梁龙门起重机主梁二维刚性截面放于五种湍流模型中进行数值模拟。
The dynamic simulation model based on the multi-rigid-body theory of the passenger restraint system for side impact of a car is created, and its validity is verified by tests.
针对某轿车建立了基于多刚体理论的侧面碰撞乘员约束系统动态仿真模型,并依据试验结果进行了模型的有效性验证。
The effectiveness of the method is demonstrated through simulation of two flexible-link and flexible-joint 3R robots manipulating a rigid load.
文中就两个具有柔性关节和柔性臂的3R机器人协调操作刚性负载为例,验证了本方法的有效性。
Take rhombic hanging basket of building a highway rigid frame bridge for example, analysis of rhombic hanging basket deformation theory, guide the basket pre-pressure test by basket load simulation.
以正在建设的某公路刚构桥梁上使用的菱形挂篮为例,分析挂篮产生变形机理,通过挂篮加载仿真分析指导挂篮预压试验。
The model of cutting process is established based on the rigid-plastic FEM, and the transient stress distribution of cutting tool in cutting process is obtained through the simulation.
基于刚塑性有限元方法建立了切削加工过程仿真模型,通过模拟获得了切削加工过程中刀具应力的分布和变化情况。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
The simulation results also show that the running stability of the vehicle system under the resilient track conditions is better than that under the rigid track conditions.
仿真结果还表明,车辆系统在弹性轨道条件下的运行平稳性优于刚性轨道条件下的运行平稳性。
Based on a former constitutive model, the calculation formulas for rigid-(visco) plasticity FEM were worked out, and an overview on the development of FEM numerical simulation was made.
论述了刚(粘)塑性有限元法的主要思想和处理方法。基于前期的本构模型,得出了刚(粘)塑性有限元法的求解列式。并对有限元数值模拟的发展前景作了预测。
Based on multibody system dynamics method and ADAMS software platform, a rigid-flexible coupling multi-body model is built for vehicle dynamics simulation.
利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。
Variation simulation analysis has been used in the design stage to predict such uncertainties, but variation analysis based on rigid body assumptions usually overestimates the assembly variations.
偏差模拟技术已经用于在设计阶段对这些不确定因素进行预测,但是基于零件刚性体假设的偏差分析通常过高估计了装配偏差。
The validity of the new model has been examined by the bar rolling experiment and the rigid-plastic FEM simulation.
为验证新模型,完成了棒材轧制试验,并且利用刚塑性有限元法对轧制过程进行了模拟。
Based on this simulation, it conclude the difference between rigid body and flexible body, and also supplied necessary dynamic load for spider's dynamic analysis and optimization.
通过刚柔耦合仿真和刚体模型仿真的比较,得出柔性体对摇摆台性能的影响因素,同时为十字轴的动力学分析和优化提供必要的动态载荷。
First, the paper presents the simulation of ring rolling processes by rigid-viscoplastic dynamic finite element method and the H-RING code.
采用刚粘塑性动力有限元模拟环轧动态过程,获得轧制过程中的分布量计算结果。
A 3d rigid-plastic FEM simulation coupled thermal model for TC4 titanium alloy by warm shear spinning is founded and the temperature boundary condition of heating by flame is applied.
针对TC 4钛合金锥形件建立了三维热力耦合有限元模型,在有限元模拟过程中叠加了火焰加热边界条件。
For analysing, comparing and appraising the anti-erosion properties of different kinds of semi-rigid base materials, offering the basis for the design, the simulation testing machine is developed.
为了分析、比较、评价不同类型半刚性基层材料抗冲刷性能,为半刚性基层材料的设计提供依据,研制了动水压力对带裂缝沥青路面半刚性基层冲刷作用模拟试验机。
According to the characteristic of hydroforming for rear axle housing, rigid-plastic material model is elected as tube blank material model process simulation analysis.
根据后桥壳液压胀形的特点,选择刚塑性材料模型进行模拟分析。
Forged part and forming procedure and stroke-load curve obtained from rigid plastic FE simulation further discloses the deformation mechanics of closed die extrusion for spiral bevel driving gear.
刚塑性有限元计算所得的齿轮锻件图、成形过程图、轴向断面网格图和力能曲线进一步揭示了螺旋伞齿轮塑性成形机理;
The simulation result comply with the specifications of structure design well, and a reference for semi-rigid structure of the stratospheric airship was provided.
计算结果符合结构设计规范的要求,可以为半硬式平流层飞艇的结构设计提供参考。
Collision Detection for rigid object in deformable environment is very popular in the field of virtual reality such as surgery simulation and so on, but few research has been made.
刚体在软体对象环境中的碰撞检测在虚拟现实的研究领域具有很大的普遍性,但以往的研究较少。
Simulation experiment of the rigid pipe suffered from oceanic forces and buffer station were done. Experimental result were contrasted to the academic calculated value.
完成了硬管在海洋载荷和中间仓重力作用下的模拟实验,并对实验结果与理论计算结果进行了对比研究。
Simulation experiment of the rigid pipe suffered from oceanic forces and buffer station were done. Experimental result were contrasted to the academic calculated value.
完成了硬管在海洋载荷和中间仓重力作用下的模拟实验,并对实验结果与理论计算结果进行了对比研究。
应用推荐