Reheat treatment is authorized for rejected cylinders. Subsequent thereto, cylinders must pass all prescribed tests to be acceptable. Repair by welding or spinning is not authorized.
对于拒收的汽缸批准后在次热处理,随后此外,汽缸必须通过所有被规定的测试是可接受的,通过焊接或转动的是不被批准。
Repair worn parts of metal products by welding on extra layers.
通过焊接额外层,修复金属制品的磨损零件。
Repair worn parts of metal products by welding on extra layers.
焊接额外层以修复磨损金属制品的零部件。
It's quite common to deal with crack by welding in repair of kiln and grind mill.
在回转窑和磨机的修理中,用焊接的方法处理开裂问题是相当普遍的。
The study and experiment on the repair of roller journal CO_2 shield welding with proper welding technics has been done by us.
用CO_2气体保护焊方法采用适当焊接工艺及焊接材料,对压榨机辊轴轴颈进行了补焊修复实验研究。
By adopting appropriate high polymer metal ceramics and optimizing cold welding procedures, online repair of leakage in cold box can be realized. Remark - able economic benefit can be achieved.
通过选用合适的新技术高分子聚合金属陶瓷产品,优化冷焊施工工艺,在线修复乙烯冷箱泄漏取得成功。
If there aren't cast-iron electrode, the cast-iron electrode can be made by ordinary low carbon steel electrode, and repair the damaged stock with arc cold welding.
在没有铸铁焊条的情况下,采用普通低碳钢焊条制作铸铁焊条,用电弧冷焊技巧修复损坏的铸铁件。
The repair practice proved that: by means of adopting reasonable welding repair process, the welding repair of lube oil cooler head made by cast iron was successful.
修复实践表明,通过采用合理的焊接修复工艺,铸铁制油冷器封头的焊接修复是成功的。
A analysis and repair computer aided system for welding machine breakdown is set up by using TURBO-PROLOG language.
利用TURBO -PROLOG语言建立了一个电焊机故障计算机辅助分析与维修系统。
By using manual arc welding to repair the big kiln circle, the welding process of ZG310-570 super thick cast steel piece was a success, with good running effect observed for more than 5 years.
通过对大窑轮圈采用手工电弧焊的方法进行修复,成功地解决了ZG310- 570铸钢特大厚件的焊接工艺,经过5年多的运行观察,使用效果良好。
Most subsea pipeline repair technologies involve fittings that can be connected to the pipeline via mechanical means, such as couplings, clamps, T-branch connections, or by welding.
多数海底管线修复技术都会涉及到一些借助机械手段或者焊接联接管线的配件,例如联轴器、钳夹、T型分支连接等。
By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
根据对比铝热焊与手弧焊修复工艺,阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
An advantage of this type of saddle clamp was that permanent repair could be made by welding the steel piece to the pipe and then removing the bolted portions.
这类鞍形管卡的优点是可对管道泄漏点进行永久性修理,把钢板和管子焊接,然后拆走螺栓部分。
The blade tip crack of the high pressure turbine is repaired by using the laser welding, which can reduce effectively the repair cost and increase the economic effectiveness of the engine repair.
采用激光熔焊方法,修复了高压涡轮工作叶片叶尖裂纹,有效降低了发动机修理成本,提高了发动机修理的经济效益。
The residual stress tests were conducted on different weld structures of repaired pipelines by drill-hole method in order to investigate the influence of welding repair on pipeline integrity.
为了解管道修复中焊接残余应力对管道完整性的影响,用钻孔法分别测试了打孔管道的不同焊接修复结构的残余应力,并和管道螺旋焊缝处的残余应力进行了对比。
Repair measures of large reducer with housing cracking are introduced by examples. Analysis is carried out on weldability. Detailed description is done on repair welding technology.
结合实例介绍了箱体断裂的大型减速机的修复措施。对可焊性进行了分析;对补焊工艺作了详细说明。
Fsurfacing welding repair the parts of wear out face made by carbon steels, dle carbon steels low-alloy steels.
用于受磨损的碳钢、中碳钢、低合金钢机件边面堆焊、修复。
For surfacing welding or repair the parts of wear out face made by carbon steels, middle carbon steels and low-alloy steels.
用于受磨损的碳钢、中碳钢、低合金钢机件边面堆焊、修复。
By using this process to repair castings, there is no obvious separating line, no slag inclusion and gas hole between the welding zone and base metal.
用此工艺焊补铸件,焊补区域与基体间没有明显的熔合线,无渣孔、气孔等缺陷。
For surfacing welding or repair the wear out face made by low carbon steels and middle carbon steels, as axle, gear and blade of mixer.
堆焊或修复低碳钢、中碳钢及低合金钢磨损表面如车轴、齿轮和搅拌机叶片等。
For surfacing welding or repair the mechanic have the face been wear out made by low carbon steels and middle carbon steels, as the mechanic used in mine and agriculture.
堆焊受磨损的中、低碳钢或低合金钢的表面,如车轴、齿轮、搅拌机叶片、行走主动轮等。
For surfacing welding or repair the mechanic have the face been wear out made by low carbon steels and middle carbon steels, as the mechanic used in mine and agriculture.
堆焊受磨损的中、低碳钢或低合金钢的表面,如车轴、齿轮、搅拌机叶片、行走主动轮等。
应用推荐