In the division pump, a division pump cylinder body comprises an outer cylindrical body and a built-in lining.
分泵中，分泵缸体由外筒体和内置衬套两部分组合而成。
Piston pump mainly by the piston in the pump cylinder for reciprocating motion to breathe and remove the liquid.
活塞泵主要由活塞在泵缸内作往复运动来吸入和排除液体。
Reciprocating pump flow and pressure head has nothing to do with the pump cylinder size, and the reciprocating frequency of the piston stroke.
往复泵的流量与压头无关，与泵缸尺寸、活塞冲程及往复次数有关。
Three mutual engagement of the screw in the pump cylinder for each lead of the formation of a sealed chamber, causing the seal between the suction mouth.
三根互相啮合的螺杆，在泵缸内按每个导程形成为一个密封腔，造成吸排口之间的密封。
The former is the process of inhalation and discharged at the same pump cylinder alternately conducted by the inhalation valve and exhaust valve control;
前者的吸入和排出过程在同一泵缸内交替进行，并由吸入阀和排出阀加以控制；
Working principle: piston moves from left to right, form a negative pressure pump cylinder, the liquid tank into the pump by the inhalation valve cylinder.
工作原理：活塞自左向右移动时，泵缸内形成负压，则贮槽内液体经吸入阀进入泵缸内。
How it works: the piston moves from left to right, form a negative pressure pump cylinder, then the suction tank fluid through the valve into the pump cylinder.
工作原理：活塞自左向右移动时，泵缸内形成负压，则贮槽内液体经吸入阀进入泵缸内。
It is primarily fixed in the bushing in the pump (pump tank) and placed in the pump cylinder screw, and with the active engagement of the two driven screw formed.
它主要是由固定在泵体中的衬套(泵缸)以及安插在泵缸中的主动螺杆和与其啮合的两根从动螺杆所组成。
This paper introduces the repair welding procedure for repairing an alumal casting piece of an oil pump cylinder, This method covers the shortages of AC argon arc weld and gas welding.
介绍了对油泵机缸体铝锰合金铸造件缺陷补焊修复的技术工艺，且弥补了若采用交流氩弧焊和气焊施焊时存在的不足。
In addition to the pump cylinder liquefied petroleum gas, but also transport liquid hydrocarbons, ammonia, propylene and other similar volatile nature of liquid and petroleum products.
该泵除罐装液化石油气外，还可输送液态烃、液氨、丙稀等各种性质类似的挥发性液体及石油产品。
Atmospheric pressure then pushes the piston back down the cylinder, and if anything (such as a pump) is attached to the piston, some useful work can be done.
于是，气压就会再次将活塞推至汽缸底部。而假如有诸如水泵这样的物体与活塞连接，就可以在活塞的带动下完成一些工作。
Reciprocating pumps convert rotary motion to linear motion. Pump speed in RPM determines the pumps output volume for any given combination of cylinder bore and piston stroke.
循环泵将曲轴旋转运动转化为柱塞的直线运动。泵速转每分钟决定了任何气缸和活塞组合的排泵量。
They can be cylinder shaped container or a manual hand pump.
它们可能是柱状的容器，或者手动泵。
But in the case of the diesel engine the supply is effected by an injection or jerk pump which forces a shot of fuel into each cylinder in turn ac cording to the correct firing sequence.
而柴油机是由喷油泵或脉动泵按照正确的点火顺序将燃油轮流地喷人各气缸的。
The main process pumps, hanging cylinder filter, environmental protection air pump, LED lamp, aquarium accessories, heating rods, atomizer series of products.
主营工艺水泵、挂缸过滤器、环保气泵、LED灯、水族配件、加热棒、雾化器等系列产品。
In this paper, the principle of variable speed pump control hydraulic differential cylinder is designed, and the simulation model of system is built, and the simulation research is carried out.
给出了采用变转速泵控闭式回路控制差动缸的原理，建立了该系统的数学模型，进行了计算机数字仿真研究。
Failures which can be solved by minor adjustment on brake pump, wheel, steering hydraulic cylinder, and micro-valve, connect level, mast roller, steering axle, etc. are excluded.
像总泵、车轮、转向液压缸、微动阀、连杆、门架滚轮、转向桥等部位，只要靠紧固进行调整就能修理的故障。
Specification matching calculations are made for the main hydraulic components such as the main pump, valves and oil cylinder and some main static specifications in the system are also calculated.
对液压部分进行了主要元件如主泵、阀和液压缸的主要参数进行了匹配计算，并对系统的一些主要静态指标进行了计算。
The inflation room provides such protection equipment as mobile air charging pump stationary high-power charging pump mobile gas supply device and spare gas cylinder.
充气间设置移动式空气填充泵、大功率固定式填充泵、移动供气装置、备用气瓶等防护设备。
Our main products is castings used in cylinder , pump and valve etc.
本公司主要生产缸、泵、阀液压件铸件。
FHPSS consists of hydraulic pump, initiative valve, steering control unit, steering cylinder and so on.
全液压转向系统是由液压泵、优先阀、转向器、转向油缸以及相关的转向机构组成。
Now, the drilling pump widespread in use is the tri-cylinder pump.
针对以上要求，目前广泛使用的是三缸单作用往复泵（简称三缸泵）。
Treated with laser the changes in microstructure and hardness of cylinder sleeve of oil-well pump for 45 steel were studied.
本文研究了45钢抽油泵缸套激光热处理后的显微组织和硬度的变化。
A new centering and clamp method was introduced in this text by processing of cylinder surface of pump shell.
通过泵壳在立车上径向外圆的加工，介绍了一种新型的找正、装夹方法。
In this device the compressed-air does not come from pneumatic-pump but is produced by a hydraulic cylinder.
但该装置所使用的压缩空气不是来自空气泵而是由一液压缸产生。
The power plant includes a hydraulic pump, a hydraulic cylinder, a guide rail and a gantry. The gantry is fixedly connected with the casing.
动力装置包括液压泵、液压缸、导轨和龙门架，龙门架与壳体固定联接；
The paper analyzes the characters of cylinder linear motor and the advantages and application future as the well pump drive system, and mentions the its structure modification direction.
分析了圆筒型直线电机的性能及其作为井下泵动力系统的优势和应用前景，提出了直线电机结构改进方向。
The paper analyzes the characters of cylinder linear motor and the advantages and application future as the well pump drive system, and mentions the its structure modification direction.
分析了圆筒型直线电机的性能及其作为井下泵动力系统的优势和应用前景，提出了直线电机结构改进方向。
应用推荐