Mainly by the impellers, pump body and pump cover composition.
首要由叶轮、泵体以及泵盖构成。
The relief valve can be cast and pump body and pump cover, also can separate assembly.
安全阀可以与泵体或泵盖铸成一体，也可以单独装配。
The main parts of pump are pump casing, pump cover, impeller, shaft, shaft sleeve and supporting parts.
主要由泵体、泵盖、叶轮、轴、轴套和支承部分构成。
Under the condition of orthogonal experiment process parameters, we actually produced Die Casting pump cover .
并选用以上正交试验的工艺参数，对泵盖进行实际压铸生产。
This pump is two-stage structure: with the pump cover with centrifugal work between clapboard wheel - the first level;
该泵为两级结构：泵盖与外隔板间装有离心工作轮——第一级；
PW, PWF mainly by the pump cover, pump casing, impeller, shaft seal, shaft, and bracket the composition of such components.
PWF主要由泵盖、泵壳、叶轮、轴封、轴、和托架等零部件组成。
The main parts of pump are pump casing, pump cover, impeller, shaft, sealing ring, shaft sleeve, bearing and shaft seal etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、轴套、轴承、轴封等零件组成。
The pump cover is provided with a cooling wash fluid circular loop inside. The pump cover is provided with a distributing ring.
泵盖中设有冷却冲洗液循环回路，在泵盖上装有分配环。
Conducting oil pump prime the pump, pump cover, bearing, bracket, shaft, seals, bearings, impeller of eight large component parts.
导热油泵首要由泵体、泵盖、轴承体、支架、主轴、密封、轴承、叶轮八个年夜的零部件组成。
The pump body and pump cover composes the pump studio. The inlet of the pump body is horizontally while the outlet is straight-up.
泵体和泵盖构成泵的工作室，泵体的入口为水平方向，出口垂直向上。
Engine fittings series:Gear chamber, Cavaera cover, Sprocket rooms cover, Preheaterbase, Water pump Cover, Intake manifold, Pump box.
发动机配件类：齿轮室、气门室罩盖、链轮室罩盖、预热器座、水泵泵盖、进气歧管、泵箱；
Pump wear parts are mainly drive shaft and bushing, passive gear center hole and shaft pin, pump shell lumen and gear, gear face and pump cover, etc.
齿轮泵的磨损部位主要有主动轴与衬套、被动齿轮中心孔与轴销、泵壳内腔与齿轮、齿轮端面与泵盖等。
The main parts include pump body, pump cover, impeller, axis, sealing rings, intermediate support, sealing and suspension parts and other components.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
The centrifugal pump is one combined structure of pump cover and integral volute and has one cast polyurethane elastomer lining in the fluid passing part.
其特征将离心泵分解成由泵盖及整体蜗壳组合结构，并在过流部位衬里一层浇注型聚氨酯弹性体。
The double attraction centrifugal pump consists of rotation shaft, pump body, pump cover, and double attraction vane wheel comprising two back-to-back installed vane wheels.
它包括转轴、泵体、泵盖，两个叶轮背靠背地安装在一起，构成双吸叶轮；
Chemical composition, melting processes, casting and heat treatment of high chromium cast iron were determined according to the requirement of materials for dredge pump cover.
在分析杂质泵护套材质要求的基础上，确定了高铬铸铁的化学成分和熔炼、铸造及热处理工艺。
Therefore, when selecting the installation position of the pump, the heat quantity of the pump cover and the bearing seat is easy to spread, and no heat accumulation phenomenon occurs.
因此选择泵的安装位置时，要使泵盖和轴承座的热量便于扩散，不出现任何蓄热现象。
Pump cover material with steel ZG230-450 more, can also be used ductile iron, the latter two materials contrast of wear resistance and hardness and heat resistance to be because the former.
泵体、泵盖的材质采用铸钢ZG230-450的较多，也可以采用球墨铸铁材质，两种材质对比后者的耐磨性和硬度以及耐温性要因为前者。
The lining is easy to form, high in production efficiency, no damage to volute, and high in wear resistance. The pump has replaceable front and back pump cover for lowering maintenance cost.
本发明较已有技术衬里简单，节省能源，生产效率高，而且不会损坏泵壳，耐磨性能好，前后泵盖可单独更换，可降低用户维修成本。
The impeller is arranged in an inner cavity formed by a pump cover and a pump body at the lower end of the pump shaft, and back blades are arranged on the impeller and are fastened by locking bolts;
在泵轴的下端，泵盖及泵体形成的内腔中设置有叶轮，叶轮上设有背叶片，并由锁紧螺钉紧固；
The pump comprises mainly of pump body, cover, impeller, shaft, seal ring, intermediate support, sealing and suspension assembly, etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
Though the rich world's inventories are high, with cover of around 50 days, it is not clear that Saudi Arabia can pump much more than it did in 2008;
尽管发达国家储备量高，可维持50天用量，但沙特是否还能像2008年时产出更多的石油是个未知；
Internal gear pump structure and other gear pump structure similar to, mainly by the outer rotor and rotor, pump shaft, pump body, the front cover, bracket, sealing device, bearing, etc.
内啮合齿轮泵的结构和其他齿轮泵结构类似，主要由外转子、转子、泵轴、泵体、前盖、托架、密封装置、轴承等组成。
Remove cover for high-pressure pump.
拆下高压泵盖。
Remove chain cover for oil pump.
拆下机油泵的链条盖。
Normally, the cumulated water in top cover is drained to cumulated water well by gravity drainage, in emergency situation, the water would be drained by the self-priming pump installed in gallery.
顶盖内积水正常情况下通过自流排水排至积水井，紧急状态下通过装在廊道内的自吸泵排水。
YCB arc gear pumps are mainly gear, KCG axis, the pump body, cover, the axial bearing, sealing etc. Using double circular-arc gear tooth sine curve.
主要有齿轮、轴、泵体、泵盖、轴承套、轴端密封等组成。齿轮采用双圆弧正弦曲线齿形制造。
Its products mostly cover on air source heat pump water heater equipment, air source air conditioner water heater and solar air source water heater etc. and commerce, home use energy saving products.
科研应用主要集中表现在能源开发及优化，产品主要涉及空气能热水器、太阳空气能等家用型和商用型高效能产品。
The pump and motor can be removed without disturbing the basin cover.
可将泵和发动机拆除，而不对槽盖造成干扰。
According to the maximum pressure to bear, pump body and cover can be made of grey cast iron (1.6mpa), spheroidal graphite cast iron (2.0mpa) or cast steel (2.5mpa, including stainless steel).
根据泵承受的最大压力，泵体和泵盖材质采用灰口铸铁(1.6Mpa)、球墨铸铁(2.0 mpa)、铸钢(2.5 Mpa，包括不锈钢)。
应用推荐