This process wastes both cycles and RAM.
这样的过程浪费了周期和RAM。
Large amounts of energy resources and raw materials from indigenous production and import are required in several growing industries where similar amounts of process wastes are generated.
一些成长性产业中,本国生产和进口需要大量的能源资源和原材料,在此过程中类似数额的废物也所产生。
The cold fusion process requires no radioactive materials, creates no radioactive wastes and is extremely energy efficient.
这壹核聚变过程无需放射性原料,不产生放射性废料,且能效奇高。
When returns arrive they can take a long time to process as information has to be found about the item and this wastes resources.
因为要寻找退货的信息,退货也可能在仓库中停留相当长的时间,这也是对资源的浪费。
It's important to consider all of the preceding wastes in the context of the process and delivering value.
在进程和交付价值的背景下,考虑所有的消耗量是非常重要的。
But not including radioisotopes and the wastes thereof generated in the final process of fabrication and manufactured for scientific medical science agricultural commercial or industrial use.
但不包括最后制造过程及制造完成可用于科学、医学、农业、商业或工业用途之放射性同位素及其所产生之废料。
Waste that has undergone this process of sewage treatment is easier and more cost effective to dispose of and the treated wastes can be used for other things such as for agricultural purposes.
废物,经历了这个过程中的污水处理厂是更容易和更符合成本效益的处置和处理的废物,可用于其他事情,如农业用途。
The water which was used to carry the wastes to the sewage treatment facility along with rain water collections also undergoes a sanitation process and the clean water is recycled for reuse.
水是用来进行废物,以污水处理设施,随著雨水的收集,也经历了卫生过程和清洁的水是循环再用。
Over 90% of the pollution load of textile wastes is contributed by the process chemicals.
纺织废水污染负荷的90以上是由工艺过程的各种化学品构成的。
Construction, operation and decommissioning required estimates of the energy inputs, material inputs such as water and process gases, and transportation to bring in materials and cart out wastes.
建设,运行和停运需要估算能量和材料输入,例如水、过程所需的气体、运进材料和倒掉废物。
Lots of urban solid wastes are produced during the process of livelihood and manufacture, which would pollute environment badly if there is no proper treatment.
在人类的生产和生活过程中会产生大量的固体废物,这些废物如处理不当必将对环境造成不良影响。
Therefore, it is impossible to consume these wastes in electroplating process and become natural closed cycle or non-discharge.
要把这些电镀三废消化于电镀工艺过程中,从而达到自然封闭循环和无排放是不可能的事。
Unsaturated polyester resin (UPR) wastes pyrolysis was cracked to prepare feed stock, and process conditions of catalytic cracking reaction were introduced systematically.
对不饱和聚酯树脂(upr)废料裂解制原料油技术进行了研究,系统地考察了催化裂解反应工艺条件。
Extremely high rate of financial support wastes social wealth and thus affects the process of transition from traditional society to modern society.
财政供养率过高会浪费大量社会财富,从而影响传统社会向近代社会转型的进程。
Using LIS can optimize the flow of dealing with medical wastes, enhance the work efficiency, supervise and control the process at spots, ensure proper disposal of all waste from clinical laboratory.
通过LIS规范了检验科医疗废物处理流程,提高了工作效率,实现了对医疗废物处理各个环节的实时监控,保证了医疗废物的正确、安全处理。
The process control and "three wastes" treatment of this technology were easy.
该工艺过程控制和三废处理都比较容易。
The term "reducing" as mentioned in these Measures refers to reducing the consumption of resources and the production of wastes in the process of production, circulation and consumption.
本法所称减量化,是指在生产、流通和消费等过程中减少资源消耗和废物产生。
The result can reduce wastes and treat heavy metal ions wastewater if it be used in the process of pomelo compositive utilization.
本文结果用于柚类深加工皮渣的综合利用,既可减少废弃物量,又可治理重金属离子废水。
Some wastes have been produced in the uranium hydrometallurgy process, and the radionuclide in the wastes has long-term potential harms to the surface water and groundwater.
铀水冶生产过程中产生一定的废物,其中的放射性核素能对地表水和地下水构成长期潜在危害。
According to the philosophy of Lean Production, we proposed the concept that there are systematic wastes in enterprise process.
对精益生产方式的哲理进行了探讨,提出了企业过程中存在系统性的浪费的概念。
This paper also set up a multicomponent model based on the whole medical waste, which solved the difficulty of simulating mixed wastes' pyrolysis and gasification process.
本文还从医疗废物总体出发,建立了多组分模型,解决了以往对混合性废物热解气化模拟的难点。
The formulation design, technical process and technical control of the procedures in the production of fishery float by use of PVC-U pipe wastes are introduced.
介绍以PV C - U管材洗机料生产渔用浮标的配方设计、工艺流程及各工序的工艺控制。
Most of the construction waste for solid wastes, general is in construction process or old buildings maintenance, dismantling produces in the process.
建筑垃圾大多为固体废弃物,一般是在建设过程中或旧建筑物维修、拆除过程中产生的。
There are various trace metals in Municipal Solid Wastes(MSW). Secondary pollution of heavy metals in the process of MSW landfill is the most difficult problem to be solved.
城市生活垃圾中含有多种微量金属元素,并且在填埋处理过程中会产生重金属的二次污染,是城市垃圾填埋处理中最难解决的问题。
Identification process was started by considering the type of the waste then defined where the wastes are produced from.
识别过程首先考虑的是废弃物的类型,随后确定废弃物的产生源。
The invention has the advantages of high efficiency, energy saving, thermal insulation, no need of timber and clay, light weight and no discharge of three wastes in the production process.
使用本发明的效果高效节能,绝热、保温,不用木材和粘土,重量特轻,生产过程无三废排放。
This paper gives an example of optimal selection of municipal solid wastes landfill sites, and discusses in detail its optimal selection method and course with an analytic hierarchic process.
本文以浦东垃圾填埋场最优地段的优选为例,应用层次分析方法,阐明了城市垃圾地质填埋场址的优选方法及其过程。
The source of three-waste and its harness measures in the production process of VCM by petroleum process were introduced. The wastes reached the state effluent standards after harness.
介绍了石油法生产VCM过程中“三废”的来源及治理措施,通过治理,“三废”的排放达到了国家排放标准。
The technological principles, process flowsheet, main parameters, equipment selection, wastes disposal and environment protection are described in this paper.
文中介绍了氧化、着色的工艺原理、生产流程、主要参数、设备选择、三废治理和环保措施等。
The technological principles, process flowsheet, main parameters, equipment selection, wastes disposal and environment protection are described in this paper.
文中介绍了氧化、着色的工艺原理、生产流程、主要参数、设备选择、三废治理和环保措施等。
应用推荐