As for why plasma don't raise, flame don't capacitance arc by high pressure?
至于为什么等离子不用电容调高，火焰不用弧压调高？
Now the plasma arc cutting machine part on gas pressure to control the flow, because when gun aperture, the gas control certain pressure and you control the flow.
现在的等离子弧切割机大多靠气体压力来控制流量，因为当枪体孔径一定时，控制了气体压力也就控制了流量。
Developed excogitates of two decumbence and one hovizoutal molding die realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.
研制出两套立式模具和一套卧式模具，实现了用工艺方法增加热挤压三通支管高度，缩小三通相贯区内拐角处圆弧半径的目的。
This paper derives the mathematical express on of the pressure of vacuum arc subjected to an axial magnetic field under stationary model and the assumption of local thermodynamic equilibrium etc.
本文在稳态模型和局域热力学平衡等假设下，推导了在纵向磁场下真空电弧压力的数学表达式。
The results of arc pressure field, fluid velocity field, and electric potentials are identical with the results in literature.
压力场、流体速度和电势的计算结果与文献计算结果相一致。
The high pressure and arc will rely on the arc, flame cutting is not appear the arc.
而弧压调高要依赖电弧，火焰切割是不出现电弧的。
Fluorescent is a low pressure mercury-smoke arc discharge lamp.
日光灯是一种低气压的汞蒸气弧光放电灯。
It is found that the gas flow is mainly controlled by instantaneous arc power and the maximum of gas flow appears not at peak pressure, but at current zero.
结果显示，气流的改变主要受电弧瞬时功率控制，最大流量不是发生于压力峰值时刻而是出现在电流过零时。
It is regarded that the lower dilution rate is related to homogeneous distribution of temperature and pressure of the arc and deoxygenization of the arc gas.
作者认为其稀释率低与电弧温度分布及压力分布均匀、温度适中、电弧气氛具有一定还原性的特点有关。
By the use of this system pressure profile, heat flux profile and enthalpy of the jet of arc heater have been measured by various transient probes.
利用该系统各种快速探针测出了电弧加热器射流的压力剖面、热流剖面和气流焓值。
In addition, the mechanism of the T-TIG arc pressure reduction to make the sound weld formation was analyzed.
此外，在焊接试验的基础上，进一步对双钨极氩弧焊降低电弧压力、减少焊接缺陷的机理进行了分析。
The partial arc may derive from the surface of polluted insulator string and form the air gap arc during the pollution flashover process at low air pressure.
低气压下绝缘子污闪放电过程中局部电弧存在飘离绝缘子表面形成空气间隙电弧的现象。
The maximum axial, pressure of the high frequency arc is higher than that of the DC arc.
高频电弧的最大轴向压力大于直流电弧。
In this paper, friction field distribution between sliver and pressure bar on a homebred drawing frame is analyzed, and on this basis, the best range of contact arc is deduced.
本文以国产并条机为例，分析了并条机上须条与压力棒上摩擦力界的分布，并进一步推导出了须条对压力棒包围角度的最佳范围。
The differences of discharge characteristics between the hollow cathode arc under low pressure and the conventional TIG arc under atmosphere are discussed.
本文介绍了空心阴极真空电弧焊接技术的特点及其放电机理，讨论了低气压下空心阴极电弧放电与常规电弧放电的不同特点。
The bending and shearing model in beam mode arc usually used for computation of dynamic water pressure for cylindrical storage tank.
在对贮液圆柱壳进行动水压力计算时常常仅仅采用整体弯曲和整体剪切两种计算模型。
The results showed that the main parameters influencing the coating properties are the arc current, spraying distance and air pressure.
结果表明，影响涂层性能的工艺参数主要是电弧电流，其次是喷涂距离和雾化空气压力。
A plasma arc loudspeaker or plasma-dynamic loudspeaker is a loudspeaker that creates sound by varying air pressure through a corona discharge or electric arc.
等离子弧喇叭，又名等离子动态喇叭，是一种通过电晕放电或电弧改变空气压力发声的喇叭。
The application of STR is investigated in the light intensity regulating system of superhigh pressure mercury-arc lamp.
本文对最小方差自校正调节器在超高压汞灯控制中的应用做了研究。
Make tube forming high pressure, and along the pipe form the blow, arc was quickly spin and go out.
使管内形成很高压力，并沿管道形成纵吹，电弧被迅速拉长而熄灭。
The welding of high pressure boiler longitudinal weld shall be electric slag welding which may be replaced by improved auto-submerged arc welding when have no electric slag welding.
高压锅炉锅筒纵缝焊接时，采用的焊接设备为电渣焊。在不具备电渣焊的情况下用改进的埋弧自动焊成功的替代了电渣焊。
The main factors effect the pressure and temperature of the chambers can be summarized as:air pressure, arc current, L/D, chamber volume, arc position.
影响气室内部流场分布情况的主要因素，可概括为：充气压强、电弧大小、气室长径比、气室体积、电弧位置。
In this paper the extrusion pressure between the stud and the workpiece during stepping arc stud welding process is acted as the controlled variable so as to control the stud plunge depth.
基于步进式电弧螺柱焊方法，以焊接过程中螺柱与工件之间挤压力为控制量，实现对螺柱送进深度的控制。
And it relates the design about a new high pressure pulse arc starter of TIG welding.
讲述了一种新型TIG焊高压脉冲引弧器的设计。
The discharge of mercury arc is electric discharge phenomena of low pressure gas and the current density is great.
汞弧光放电是一种低气压气体放电现象，放电电流密度大。
Hydraulic pressure core-pulling is adopted in this mechanism, and it can accomplish linear and arc directional core-pulling motions.
该机构采用液压抽芯，能完成弯管处的直线和弧线两个抽芯动作。
The descaling technology with high pressure & low flow rate designed by SMS arc introduced in the paper.
本文详细论述了珠钢的高压低流量除鳞技术。
Lamps are electric lamps that produce light in a small arc tube under high internal pressure.
汽车高压气体放电灯是一种利用处于高压状态的气体放光的电灯。
Volcanism in northeastern China is likely a product of such retreat of subduction, far field back-arc extension, and melting due to reduce of pressure while mantle upwelling.
中国东北火山形成很可能属于这种后撤俯冲、远离海沟陆内弧后引张、地幔热物质上涌、减压熔融的情况。
In this article, the author analysed the cause of arc tip pressure meter scorched, an improved method for contactless pressure meter.
文章分析了电接点压力表触头烧蚀的原因，提出了无触点式压力表的改进方法。
应用推荐