We inscribed surface relief grating on the thin films using Point-by-Point method and amplitude mask method (the amplitude mask was taken place by grating roll film manufactured by ourselves).
利用逐点写入法和振幅掩模法(振幅掩模板为自制光栅胶片)在这种薄膜上刻写了表面形貌光栅。
First, you can configure the join point directly by varying some context available at the join point, like method arguments or the executing object itself.
首先，可以通过改变连接点上的上下文来直接配置连接点，如方法参数或者执行对象本身。
Point-by-point Comparison interpolation is one method of the contour interpolation algorithms, ever used widely in CNC machine tools, but its being not to realize two-axis limits its application.
逐点比较法是轮廓插补算法之一，曾在数控机床中被广泛采用，但由于它存在不能实现两轴联动的缺点，限制了其应用。
The method to check short-circuit point between parallel conductors in transformer winding by Gaussmeter and to repair fault point are introduced.
介绍了运用高斯计来探查变压器绕组内并联导线间短路点，并对故障点进行修复的方法。
This method can be applied to terrain correction point by point for the airborne gamma energy spectrum in cases of any flight ways and arbitrary topographic conditions.
该方法特点是适合于任意飞行方式(缓地形和水平飞行均可)和任意地形条件航空伽玛能谱的逐点地形改正。
Because the numerical solution is obtained point to point by it, the probabilistic numerial method is not expensive for the problem of concentrative loading.
又因为此种方法，是逐点获得数值解的，因此，用于集中载荷等问题时不显工作量大和浪费。
Firstly, the testing principle of this system is introduced on the basis of discussabout point-by-point integration method and floating-point evolution.
文中首先对用于有效值计算的逐点积分法与浮点开方算法进行了论述，并在此基础上介绍了系统的检测原理。
This paper studies the method of point by point dimension parametric drive.
提出了逐点驱动的尺寸驱动参数化方法。
An approximate solution on ultimate load of a circular plate under radial and lateral loads is derived from equations by subdomain Weighted Residual Method (WRM) and point by point WRM.
本文应用加权余量法中的子域法和配点法，求出了均匀圆板在径向和横向均布荷裁作用下的极限荷载的近似解。
After analyzing the advantage, shortcoming and implement principle of the point-by-point comparing method, beeline interpolation, circle interpolation are realized.
通过对逐点比较法的优缺点及其实现原理的研究，采用逐点比较法实现了直线以及圆弧的插补运算。
The amplitude-frequency characteristics measured by means of frequency sweeping are dynamic characteristics and those measured by means of point-to-point method are static characteristics.
用扫频法快速测量各种系统的幅频特性是动态特性，按逐点描绘法取得的幅频特性是静态特性。
Finally, an area matching based force point searching method is applied to solve the force point location problems caused by flat-form model.
最后，给出了基于面积匹配约束的受力点寻址三维算法，主要是用于解决一些扁平状软组织受力时的受力点处理不足。
In the process of optimization, the method has the ability of escaping from the local minimized point and arriving at the global optimal point by setting an escaping coefficient.
通过设定逃逸系数，算法在寻优过程中具有了能够跳出局部极小点到达全局最优点的能力。
This paper introduced the algorithm process by using point by point comparing method, improved algorithm of interpolation arc, and provided a design method of NC system interpolation software.
本文介绍了逐点比较法插补圆弧的运算过程，并对逐点比较法插补圆弧的算法进行了改进，为数控系统插补软件的设计提供了参考。
The maximum power point of the photovoltaic cell is traced by using the step-by-step method and the simulation result shows that the maximum power point tracking results are obvious.
并应用逐次逼近法对光伏电池的最大功率点进行了跟踪，仿真结果表明：最大功率点的跟踪效果显著。
On the basis of linear interpolation with point by point comparison method, a new method for linear interpolation with long axis regulation point by point comparison is put forward.
以逐点比较法直线插补为基础，提出了长轴调速逐点比较法直线插补的新方法。
A high quality of whole field speckle fringe pattern can be obtained and the point-by-point filtering method can also be used to analyse the deformation more accurately.
应用该技术可获得优质的全场散斑条纹图，并可用逐点滤波法进行精确定量分析。
In this paper, a bundle method for the minimization of the convex nonsmooth function in point by point maximum is suggested.
研究了用束方法求解非光滑逐点最大凸函数的极小化问题。
The invention discloses a point-by-point excitation well depth designing method based on a uniform near-surface model.
本发明公开了一种基于一致近地表模型的逐点激发井深设计方法。
Based on point-by-point integration method and one dimension theory, designed the guide vane which has uniform velocity moment distribution with a hydraulic design computer code of the guide vane.
在逐点积分法一元理论叶片绘形的基础上，利用导叶水力设计程序设计了等环量叶片。
On the basis of the least squares, a center moving method by point to point searching can confirm the direction of the moving without probe.
在最小二乘法的基础上采用中心移动逐步搜索，能够不需试探便可确定搜索方向。
Using this algorithm in the location problem of leak point shows that this method can find the leak point and the location precision can be increased by 0.96% in comparison with normal methods.
利用该算法对泄漏点定位，结果表明，该方法能够找到泄漏点，而且与常规方法相比精度提高0.96%。
By studying the point-to-point comparison method, the author presented a new algorithm based on point-to-point comparison method.
通过对逐点比较法的研究，在逐点比较法的基础上提出了一种基于逐点比较法的新算法。
The problem for getting K T point of nonlinear programming by combined homotopy interior point method under linearly independent constraint qualification is discussed at [1].
文献 [1 ]讨论了在线性无关的约束规定下 ，用组合同伦内点法求解非线性规划的KT点问题。
It is shown that the method of moving-point TSUCG makes the time, when yielding water gas of high heat value, prolonged by 0.67 ~ 1.5 times compared with that of fixed point supplying wind or steam.
模型试验结果表明，移动点两阶段煤炭地下气化方法，使产生高热值水煤气的时间较固定点供风(汽)模式提高0 . 67 ~ 1 . 5倍。
It is shown that the method of multi-point TSUCG makes the time, when yields water gas of high heat value, prolong by 0.67 ~ 1.5 times compared with that of fixed point supplying wind or steam.
模型试验结果表明，多点两阶段煤炭地下气化方法，使产生高热值水煤气的时间较固定点供风(汽)模式提高0 . 6 7 ~ 1.5倍。
The invention also relates to a method for measuring the heat conduction coefficient, the eutectic point and the congruent melting point by the device.
本发明还涉及利用该装置测量导热系数、共晶点和共熔点的方法。
Four Arithmetic Operations of Fuzzy Number by Method of Intersection Point or Discontinuity Point;
本文给出了用定义法证明二元函数可微性的四则运算法则与复合运算法则。
Four Arithmetic Operations of Fuzzy Number by Method of Intersection Point or Discontinuity Point;
本文给出了用定义法证明二元函数可微性的四则运算法则与复合运算法则。
应用推荐