We could obtain dictates in the steady-state visual evoked potential (SSVEP) and can control the spatial movement of the artificial limb through a programmable logic controller (PLC).
通过基于稳态视觉诱发电位构造的脑-机接口获取控制指令，通过可编程逻辑控制器(PLC)控制机械手完成规划的动作。
Programmable logic controller is short for PLC. It is a special purpose industry control machine, that kernel is single chip microcomputer.
可编程逻辑控制器简称为PLC，它是以单片机为核心的工业控制专用机。
The system is composed of three subsystems, they are the signal monitor subsystem, the PLC (the Programmable Logical Controller) one and the host computer control ore.
该自动化系统分为信号监测、PLC(可编程逻辑控制器)控制、上位机控制三大部分。
The characteristic of PLC is introduced and the application of PLC with mightiness logic and number function in hoist control system underground small cargo hoist is emphasized.
介绍了可编程序控制器（PLC）的功能和特点，着重阐述了具有强大逻辑、算术控制功能的PLC在小型货物提升机控制系统中的应用。
The paper introduces the function of PLC in the automatic control system of pumping station.
介绍了可编程序逻辑控制器（PLC）在输油泵站自动控制系统中的作用。
In the paper, traffic signal light is controlled by PLC-200 by using programming logic controller of Siemens company.
文章主要是采用西门子公司的可编程逻辑控制器PLC- 200来实现交通信号灯的控制。
This is a new floating oil recovery equipment which consists of the water interface testing sensor, oil interface sensor, and is controlled by PLC.
介绍了一种由水界面检测传感器、油界面检测传感器，通过可编程逻辑控制器(PLC)控制的新型浮油回收机。
The paper introduces the process of continuous furnish preparation, its measuring and controlling systems, the structure and hardware design of the whole system where the PLC is used as control unit.
介绍了造纸配浆工段的工艺流程、测控系统、以可编程逻辑控制器（PLC）为控制单元的系统结构和硬件设计，同时详细阐述了实现连续配浆的控制算法。
This paper introduces the application of programmable logical controler PLC to program control of coal pulverization.
介绍可编程逻辑控制器（PLC）在电站制粉系统程控中的应用。
This paper introduces the requirement of modern radar for monitoring and controlling, and how to use the PLC technique to carry out the monitoring and controlling in modern radar system.
介绍了现代雷达对系统监测和控制的要求，及如何利用可编程逻辑控制器（PLC）来实现现代雷达监测和监控系统。
For the accelerator magnet power supply, usually the Programmable logic controller (PLC) is used to server as the controller for logic protection and control.
加速器磁铁电源的逻辑保护和控制一般通过可编程逻辑控制器PLC实现。
Using the PLC instead of conventional relays for logic control is suggested and its control program is given.
提出了以可编程序控制器(PLC)代替常规继电逻辑控制的方法，并给出了控制程序。
An automatic trim and solder machine based on PLC and PT are introduced, and application and designing method of PLC and PT are presented.
介绍一种基于可编程逻辑控制器（PLC）和触摸屏（PT）的自动切筋沾锡机及PLC和PT的应用与设计思想，讨论该系统的结构、工作原理和软件设计。
Substitutes S7-200 series of PLC for relay control logic, realizes the automatic control for batching.
使用S7-200系列可编程序控制器（PLC）代替原来的继电器控制逻辑，实现了配料的自动控制。
A diagram checking module for PLC base on IEC61131-3 standard is designed and the module is divided into real-time part and non real-time part.
分实时和非实时两部分设计一个基于IEC61131 - 3标准的可编程逻辑控制器(plc)梯形图检查模块。
The soft switching of asynchronous communication among PLC (Programmable Logic Con-troller), transducer, touch screen, RS-485 module and PC is introduced.
主要介绍电气设备中可编程逻辑控制器(plc)、变频器、触摸屏、RS- 485模块及个人电脑之间实现异步通信的软切换。
The system is based on frequency conversion velometer and PLC. This paper analyses the construct of the system, and introduces the working theory of position and graphic sensors.
本文依托于变频调速器和可编程逻辑控制器（PLC）技术，可以有效的把智能控制方法应用于控制现场。
To introduce digital logic program designing method of microminiature PLC application to circular cooling water system.
介绍超小型可编程控制器(plc)在循环冷却水系统应用中数字逻辑的程序设计方法。
HSP series glass sand blasting machine automatic system is made of touch screen and PLC.
HSP系列玻璃喷砂机自动控制系统由触摸屏和可编程逻辑控制器(PLC)组成。
The basic method of designing a PLC using MCS 51 micro controller is presented in this paper.
本文提出了用MCS-51单片机设计简易型可编程序逻辑控制器（PLC）硬件和软件的基本方法。
PLC is widely used in industrial control presently.
可编程逻辑控制器PLC在工业控制中应用广泛。
An automatic control system for one municipal wastewater treatment plant is selected, designed and discussed. The results indicate that PLC control system is the best choice.
通过一个城市污水处理厂自动控制系统的选取与设汁过程作为实例，说明了可编程逻辑控制器(PLC)自动控制方案是当今城市污水处理厂的最佳选择。
The principle of the skimming oil and scraping sediment machine and its control system design based on programmable logic controller (PLC) are introduced.
介绍了撇油刮渣机的工作原理 ，采用PLC可编程逻辑控制器设计了该机的控制系统。
These experiments involve the application of the basic function of the PLC. They will be very useful for students to grasp the theory learned and improve the ability to practise.
这些实验包含了可编程序控制器（PLC）最基本功能（逻辑、定时、计数等）的应用。
Existing design methods for discrete event control system (DECS) implemented with programmable logical controller (PLC) have disadvantages in efficiency and ease of use.
对于采用可编程逻辑控制器(PLC)实现的复杂离散事件控制系统(DECS)，现有设计方法在效率和易用性等方面存在不足。
Existing design methods for discrete event control system (DECS) implemented with programmable logical controller (PLC) have disadvantages in efficiency and ease of use.
对于采用可编程逻辑控制器(PLC)实现的复杂离散事件控制系统(DECS)，现有设计方法在效率和易用性等方面存在不足。
应用推荐