The vibration of plate and shell has been highly concerned.
板壳结构的振动问题一直是研究人员关注的课题之一。
Composite plate and shell with rubber liners can analogize real filament wound pressure vessels.
配橡胶内衬的复合材料板壳可以模拟真实纤维缠绕压力容器。
Combined plate and shell foundation is one of the main forms of foundation for high-rise structures.
板、壳组合基础是高耸构筑物基础的主要型式之一。
Composite plate and shell with rubber liner can simulate filament wound pressure vessels of the aircraft.
配橡胶内衬的复合材料板壳可以模拟宇航飞行器的纤维缠绕压力容器。
The combined structures which are made of bar, beam, membrane, plate and shell elements are used broadly in engineering.
杆、梁、膜以及板壳等多单元组合结构被广泛地应用到工程实际当中。
High polymer damping materials distributed in plate and shell structures as damping layer are effective to suppress vibration.
高分子阻尼材料在板壳结构中作为阻尼层布置,阻尼减振效果很好。
A 16 node shell element with relative degrees of freedom was developed for large deformation analysis of plate and shell structures.
为了简便有效地解决板壳结构的大变形问题,针对16节点相对自由度壳单元进行研究。
It is very hard to obtain the solution of acid hydrolysis FRP tank cover as stiffened composite plate and shell by analytical method.
酸解罐玻璃钢盖子作为加筋复合材料板壳,应用解析方法很难求解。
The Design Engineer shall determine whether the standard component support is to be considered as a "Plate and Shell" or "Linear" Item.
设计工程师负责决定标准管架元件的归类,即,属于“板材和外壳”,或属于“线材”。
Stiffened plate is the basic structure form of ships, so it is important to study the buckling characteristic of stiffened plate and shell.
加筋板是船舶与海洋结构物的基本结构形式,因此研究加筋板壳的稳定性有着十分重要的工程意义。
Through years of researchers' persistent efforts, quite a number of plate and shell elements have been presented and many of them are excellent.
经过众多研究者数十年的努力,已经有为数可观的板壳单元出现,其中不少是品质优良的。
The formulas of bending problem of isotropic or anisotropic plate and shell is established, the applicability of this method has been shown by many numerical practices.
本文在板、壳勒夫——柯希霍夫假设的基础上,推导出金属、复合材料板、壳弯曲问题的基本公式。大量数值计算从各方面证明了本方法具有良好的使用性能。
The theory of controlling the noise radiated by plate and shell according to frequency districts is stated. A damping design method in terms of the value of noise reduction is advanced.
本文阐述了板壳结构噪声的分区控制理论,提出了以降噪量作为设计指标的阻尼设计方法;
There are three approaches in numerical simulation of plate and shell structures: plate and shell theory approach, degenerated continuum approach, direct three-dimensional(3D) continuum approach.
对于板壳问题,共有三种数值模拟方案:线性或非线性的板壳理论、退化连续体方案和直接三维连续体方案。
Plate movements are the surface expressions of motions in the mantle—the thick shell of rock that lies between Earth's crust and its metallic core.
板块运动是地幔运动的表面现象。地幔是位于地壳和金属内核之间的一层厚厚的岩石壳。
GG5135 X-ray security check equipment and components shell plate can only be a qualified professional and technical personnel to open!
GG 5135型X射线安全检查设备的外壳板和部件只能被有资格的专业技术人员打开!
The new type of all-welded plate & shell heat exchanger combining the advantages of plate, shell & pipe heat exchanger has been applied in industry and shipbuilding.
近年来,集板式、壳管式换热器优点于一体的新一代板壳式换热器在工业、船舶行业有了一定程度的应用。
Based on experiment and collection of the spheroid container ball slice to model data, a new method is proposed to the shell plate and descends to anticipate using one calculation method.
通过实验并采集球形容器球瓣片成型数据,总结出了一种较为新颖的球壳板一次下料展开计算方法。
When equipment slotted side gap, face plate electrode and groove, perpendicular to the bottom of the shell and necessary.
当设备有槽侧的隔阂时,面临电极板和槽,壳有必要垂直于底部。
This paper introduced the fabrication processes of welded plate heat exchangers sandwich and shell and welding technique which adopted in the course of fabrication.
扼要介绍了全焊接板式换热器的芯体和外壳的制造工艺以及在制造过程中所采用的焊接技术。
Its shielded box should be used the main air gap and prevent the primary current to produce the magnetic field concentrating in the shield shell metal plate.
其屏蔽盒应用主气隙,防止原电流产生的磁场集中在屏蔽壳的金属板内。
This paper introduced the fabrication processes of welded plate heat exchanger's sandwich and shell and welding technique which adopted in the course of fabrication.
简要介绍了全焊接板式换热器的芯体和外壳的制造工艺以及在制造过程中所采用的焊接技术。
Dynamic response and energy absorbing characteristics of shallow spherical shell structures when impacting a rigid plate are studied here.
对薄壁扁球壳结构撞击刚性板的动态响应和吸能特性进行了研究。
The structure and performance characteristics of shell heat exchanger with corrugated plate are introduced.
介绍了波面板壳式换热器的结构和性能特点。
Based on the practical effect, the corrosion resistant method using double layer graphite lining and natural hard rubber layer in between steel shell and graphite plate is a successful method.
从实际使用的效果来看,对此类介质采用双层石墨板衬里、钢壳与石墨板之间设置天然硬质橡胶隔离层这一防腐方法是成功的。
The surface for shell plate must ensure that clear, good appearance and the subsequent coats must avoid coverage on the previous coats.
外壳必须保证涂层清晰、美观,且后续施工的涂层一定要避免覆盖在前道涂层上;
Large vertical cylindrical steel tanks widely used for bulk and fluid storage generally consist of a thin bottom plate, a cylindrical shell, and a fixed or floating roof.
大型立式圆柱形钢储罐由底板、圆柱壳、固定或浮动顶盖组成,广泛用于固体和液体的储存。
A knife switch with iron shell shall be installed in the power supply line, which is exclusively for this oven, and the outer plate shall be grounded.
应在供电线路中安装铁壳闸刀开关一只,供此箱专用,并将外壳接地。
Use ceramic materials as the dielectric, silver as electrode, and metal plate as shell.
用陶瓷材料做电介质,金属银做电极,金属极板做外壳。
The application and main characteristics of the plate shell heat exchangers were introduced in this article.
介绍板壳式换热器的主要特点和应用。
应用推荐