Plasticizing unit drove by hydraulic pressure motor, simple in structure and maintenance.
液压马达直接驱动螺杆的塑化单元,结构简单,维护简单。
The reinforcement of plasticizing effect or POSS was dependent on its dispersion structure.
POSS对硅橡胶的增强效应、增塑效应取决于其分散结构。
Why this three screw extrusion machine has such a powerful plasticizing dispersion function?
为什么这种三螺杆挤出机具有如此强大的塑化分散功能呢?
Use of PE plasticizing agent promoter together with POE could have coherent effect to plasticize.
助增韧剂PE与POE配合使用具有协同增韧效应。
The screw and machine barrel with optimization design and elaboration have excellent plasticizing effect.
优化设计和精心制作的螺杆、机筒有极好的塑化效果。
The few methods to increase plasticizing time without lengthening cycle time all depend on simultaneous action.
几个可增加塑化时间而不增加周期时间的方法都离不开并行动作。
It usually aims at material reinforcement, enhanced crystallization rates and plasticizing for easier processing.
它通常旨在材料加固,提高结晶率和塑化更容易处理。
It is mainly used in plasticizing, extruding and forming PVC pipe, plate, sheet, film, profile, and granulator etc.
主要用于PV C管、板、片、膜、型材、造粒等塑料制品的塑化和挤压成型。
Based on the shear theory of hydrodynamics, the damping coefficient in plasticizing process is determined in this paper.
依据流体动力学的剪切理论,确定预塑过程聚合物熔体的阻尼系数。
Besides plasticizing capacity, the reaction function should be taken into account when a reaction extruder is being designed.
反应挤出机除了塑化功能外,在设计上应充分考虑反应挤出工艺的要求。
By comparing the test results, the performances of polycarboxylic plasticizers and Naphthalene plasticizing agent are discussed.
通过对比试验,比较聚羧酸系塑化剂和萘系塑化剂的性能,并对结果进行了讨论。
High torque and excellent performance of hydraulic motor can drive screw directly and shorten plasticizing time so that saves energy.
采用高扭力、效率佳之油压马达,直接驱动螺杆,可缩短塑化时间节省能源。
Influences of gel content and use level of dull PVC resin on the extinction property and plasticizing property of products were studied.
介绍了消光pvc树脂的应用及性能,研究了消光pvc树脂的凝胶含量、用量等因素对制品的消光性能及塑化性能的影响。
The most effective ingredients for making up high performance concrete are super-plasticizing agent, fly ash or slag powder, silicon powder.
配制高性能混凝土最有效的几种组分是超塑化剂、粉煤灰或矿渣、硅粉。
Due to the lack of polar sites on protein conglomerates, the alcoholic leached SPC did not get enough plasticizing effect from existed water.
由于蛋白质聚集微粒表面的极性吸附点减少,致使醇法大豆浓缩蛋白无法获得有效的塑化作用。
Naphthalene sulfonates of purification product, has the air-entraining, super plasticizing, efficient decrease water and enhance etc. Function.
萘磺酸盐的提纯产品,具有非引气、超塑化、高效减水和增强等功能。
This machine is with the advantage of low-speed cutting, no-material decompounding, even plasticizing and mixing, high output and wide using area.
该机具有剪切速率小,物料不易分解,塑化混练均匀,产量高,适应范围广等特点。
The results indicate that tearing strength of coated fabric decreases with the increase of the plasticizer concentration and plasticizing efficiency.
结果表明,增塑剂含量增加、增塑效率提高使涂层织物撕裂强度降低。
The degree of fusion between the processing aid ACR and a PVC resin is not affected and the plasticizing time of PVC can be shortened to some extent.
制得的加工助剂ACR与PVC树脂之间的融合度不受影响,可在一定程度上缩短PVC的塑化时间。
Experiments have proved that an improved bentonite used as a plasticizing agent in the body of electrical porcelain insulators can greatly plasticize the body.
通过在电瓷绝缘子坯料中使用一种改良膨润土作为增塑剂来弥补粘土可塑性的不足,试验证明其对坯料可塑性能增强效果明显。
The plasticizing and softening effects of waste oils from petrochemical fac-tory (JZFY) on chloropoiyethylene (CPE) and its blends and composites are discussed.
探讨了石油化工厂废油渣(代号JZFY)作为氯化聚乙烯(CPE)的增塑剂对CPE及其复合材料或并用体的增塑软化效果。
Everything else unchanged, the bigger the screw diameter, the bigger is the depth of the screw flight in the metering section, which increases plasticizing capacity.
在螺杆的设计不变的情况下,螺杆直径越大,计量段的槽深便越深,增加了塑化能力。
In this article, we discussed the methods of Plasticizing of bone China mud in aspects of the raw materials, the processes of mud making especially in the plasticizer.
从坯料配方、泥料制备工艺,特别是增塑剂的选择和应用方面论述了对骨灰瓷泥料增塑的途径。
The invention improves the machining efficiency, remarkably improves the plasticizing effect of materials and is beneficial to forming large-scale injection molding products.
本发明提高了加工效率,物料的塑化效果明显提高,且有利于成型大型注塑制品。
In order to solve the problems in the micro injection molding, some measures of improvement in the plasticizing, injection, metering units, and monitoring system were proposed.
综述了微注射成型技术存在的问题和改进方法,探讨了微注射成型机的塑化、注射和计量等装置的结构性能改进,并提出了监测系统的改进方案。
The selected compound plasticizing agent is beneficial to hot plastic working, widens the range between the fusion point and the decomposition point and prevents discoloration.
选用的复配增塑剂有利于热塑加工,拉宽熔点和分解点之间的范围,并防止变色。
Sodium carbonate is used as fired fly ash brick blank plasticizer for preparing fired fly ash brick with low cost, good plasticizing effect and no influence on molding of admixture.
将碳酸钠作为烧结粉煤灰砖坯料塑化剂应用于制备烧结粉煤灰砖,具有价格低廉、塑化效果好且不影响掺合料成型等优点。
High plasticizing performance with barrier screw. Melting performance and homogeneity optimized by additional compounding section. Long service life thanks to optimal choice of materials.
螺杆带阻隔器,塑化性能高。额外的混合区,计量和塑化更优化。优化选材,使用寿命长。
High plasticizing performance with barrier screw. Melting performance and homogeneity optimized by additional compounding section. Long service life thanks to optimal choice of materials.
螺杆带阻隔器,塑化性能高。额外的混合区,计量和塑化更优化。优化选材,使用寿命长。
应用推荐