This plastic part is one up0n the made of iron.
这个塑料部件比铁制的还好。
Hold the plastic part when assemble and unassembled.
装卸时应手握塑料件部分。
With the rapid development of cars industry, plastic part is used widely in the car.
随着汽车工业的飞速发展，汽车塑料件的使用更为明显。
The arrangement of the ribs has important effects on the rigidity of molded plastic part too.
加强筋的布置对注塑件的刚度也有重要影响。
Don't use the strong or volatile chemicals to clean, otherwise it will damage the plastic part.
不要使用硬的或挥发性化学品清洁应急灯，否则会损坏塑料件；
A technical analysis was made on a plastic part used in the left and right wind outlet of Volkswagen cars.
对大众轿车左右出风口塑件进行了工艺分析，提出了合理的注射成型工艺。
This high pressure was the cause of higher melting temperature and increased cooling time for plastic part.
这种高压力较高的熔融温度，增加冷却造成塑料的一部分时间。
Plastic will reduce the effect of essential oils, to avoid any essential oil directly onto the plastic part.
塑料会使精油降低效应，避免将精油直接滴在任何的塑料部分。
The MPH (MDH) pump's plastic part is reinforced with fiberglass while that of MPH (MDH) -f with carbon fiber.
泵的塑料部件以玻璃纤维增强，MPH (MDH) -F泵的塑料部件以碳纤维增强。
The plastic part is also provided with an elongate groove above, through which the air director device passes.
该塑料部件上方具有延伸的勾槽，所述空气导流装置穿过该勾槽。
The key was a plastic "ribcage," a complex molded plastic part that pushed the limits of injection-molding tooling technology.
其中的关键是一种塑料特征“筋墙”，这是一种比较复杂的注塑塑料零件，达到注塑技术的极限。
The plastic part produced in it has the precision meeting th design requirement and the part can meet the use requirement comple…
该模具运行灵活、可靠，制件精度达到了设计要求，完全可满足使用要求。
With this mould automatic stripping of plastic part can be realized operation strength lowered, and production efficiency increased.
该模具可实现塑件自动卸料，降低了操作强度，提高了劳动生产率。
Injection molding is one of the key ways of thermoplasticity plastic molding which can mold precise plastic part with complex shape.
注射成型是热塑性塑料成型的主要方法之一，可以一次成型形状复杂的精密塑件。
When the load is removed, the elastic portion of the strain is recovered, but the plastic part (slip and creep) remains as permanent set.
当荷载被移走时，应变的弹性部分恢复，但塑性应变部分(滑移和徐变)却会永久呆留。
The design is a plastic mould design of the back over of mobile, which analysis part structural with ABS as the material of plastic part.
本设计是手机后盖塑料模具的设计，对零件结构进行了工艺分析，采用ABS作为塑件的材料。
Expound the widely used mold structures of plastic part with thread, explain the requirements of these structures, the advantage and drawback.
指出常用螺纹脱模机构的应用条件及优缺点。
The concept and function of plastic part flow chart, and depicting method of flow chart for some basic geometrical objects are introduced respectively.
介绍了塑料零件流程图的概念、作用及一些基本几何体流程图的绘制方法。
Through an example, the key problems of the small precise thin-thickness plastic part molding in injection mold were discussed. The solution was put forward.
结合一个例子探讨了小型精密薄壁塑件成型模具设计中的一些关键性问题，并提出了一些可行的方法。
An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.
在侧抽芯机构中设计出一种顶出机构，改善塑件的成型质量，防止塑件脱模时的变形。
Four, the size is stable, in the molding process, the plastic part and the mold contact surface compared to leave the mold part the size stability to be better.
尺寸稳定，在成型过程中，塑件与模具接触的面要比离开模具部分的尺寸稳定性更好。
The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.
从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。
Through the analysis of the structure of the deep_cavity plastic part, the causes of some problems often fallen across in the design of the injection mould were found out.
对中性笔笔帽塑件进行了分析，确定了模具结构，阐述了深腔强脱塑件模具的设计注意要点，对同类注射模具有较好的参考价值。
Having 5 years or above plastic part design experience and at least 3 years project management experience. One also having metal pars design experience will be more preferred.
至少5年以上塑胶件设计经验和至少3年以上项目管理经验。如果还有五金件设计经验者优先。
Analyzed the influence of the plastic part injection molding process to part quality, introduced design of injection mold, mold parting structure design and mold temperature control design.
分析了塑件的成型工艺及模具注射成型对塑件质量的影响，介绍了浇注系统的设计，模具分型结构、模温控制的设计。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
The injection machine pushed the knockout plate, and then the knockout plate drove the threaded rod, resulting in the rotation of the threaded core and the auto_demoulding of the plastic part.
模具的特点在于利用注塑机顶出动作，由推板驱动螺杆，经齿轮传动使螺纹型芯旋转，塑件自动脱出。
Based on the analysis of the technological characteristics of the plastic part, a compression model die structure was designed. The die characteristics and the operating process were discussed.
分析了塑件的工艺性，设计了新型的压模结构，论述了模具特点和工作过程。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
Moulding technology of specular seat is analyzed and the injection mold of this plastic part gets designed furthermore working process and key points of die design and manufacture are provided.
分析了镜座的成型工艺，设计了该塑件的注射模，并介绍了该模具的工作过程和模具的设计与制造要点。
应用推荐