If any of the LHC's 1, 200 bending magnets are even slightly tilted, he says, the beam would veer up or down out of the ring's plane.
如果LHC中的1200个扭曲磁铁中的任何一个有哪怕是轻微的倾斜,粒子束都会朝上或朝下发生改向,从而脱离环道平面。
In this paper, problems of bending of thin plates under the combined action of lateral loading and in-plane forces are studied by means of perturbation method.
本文应用摄动方法研究了薄板在侧向载荷和中面力的联合作用下的弯曲问题。
Exhale and extend your torso to the right directly over the plane of the right leg, bending from the hip joint, not the waist.
呼气上身伸展向右到右腿的上面,注意弯曲要在髋关节,而不是腰部。
Based on the extended homogeneous capacity precision integration method, a novel method was presented for solving plane bending problems of elastic arches with arbitrary profile.
基于齐次扩容精细积分法,提出了求解复杂载荷作用下任意外形弹性拱平面弯曲的一种新方法。
When a curved beam is bending in the plane of the curvature, the neutral axis of cross section is not identical with the axis of gravity due to the influence of the initial curvature.
由于曲率的影响,曲线梁在其曲率平面内弯曲时的中性轴不通过横截面的形心。因此弯矩在形心处要引起正应力,从而引出所谓“等效轴力”的概念。
The main function of the system is in-plane bending radius estimation, forming limit estimation and forming process optimization.
本系统的主要功能有:面内弯曲半径的预测;成形极限的预测;成形工艺的优化。
Some difficulties in calculation of thin-walled structures with "plane bending theory" and "constrict twist theory" are overcome, showing the advantages of this method.
从而突破了弯心不共线薄壁杆件体系计算困难的问题,显示了这种计算方法的优越性。
In-plane bending of a strip metal under unequal compressing with conical rollers is a kind of advanced bending processes.
不均匀压缩下金属板带面内弯曲成形是一种不同于传统塑性弯曲的先进弯曲方法。
Because compression and bending strength of multi-function concrete hollow block is strong, its masonry compression strength, shearing strength and eccentric of out of the plane is much higher.
多功能混凝土空心砌块的抗压、抗折强度较大,使得多功能混凝土空心砌块砌体抗压强度、抗剪强度和平面外偏心承载力较高。
A comprehensive study of free vibration, buckling and bending of anisotropic simply-supported skew plates subjected to in-plane normal and shear forces is conducted.
对简支各向异性平行四边形板在面内张力和剪力作用下自由振动、屈曲和弯曲问题作了全面的研究。
In this paper, the test results of bending concrete specimens are shown, and the vlues of plane-strain fracture toughness, calculated by four different methods, are compared with one another.
本文,对混凝土弯曲试样进行了测试,并用四种不同的方法进行了平面应变断裂韧性的计算和比较。
The effect of in-plane bending deformation on the lateral_torsional buckling of beam_columns is considered and the effect form, the additional moment factor, is obtained.
得出了平面内弯曲变形对压弯构件弯扭屈曲的影响形式,这一形式可用统一的弯矩附加系数表达。
The limit load calculation of welding piping tees under the action of the in plane bending moment was derived based on the limit analysis.
基于极限分析的观点,推导了工业中焊制三通在面内弯矩作用下的极限载荷估算式。
The formulation of the element considers the coupling effects between in-plane bending and torsion as well as transverse shear effects for the stiffeners.
在该单元构造过程中,考虑了肋骨弯曲、扭转、面内剪切和横向剪切变形的影响;
The current biaxial bending design formula always use the moment magnifier factor of in plane bending, which based on finite tests data, it's a semi- theoretical -semi-experience formula.
现今规范中的双向压弯构件的稳定验算公式中的弯矩放大系数都是套用平面内的弯矩放大系数,它是建立在有限的试验基础上的,是一个半经验半理论的设计公式。
This paper presents the results of a parametric study to investigate the ultimate strength of sleeve reinforced hollow section T-joints subjected to out-plane bending.
对用套管加强的T型管节点在平面外弯矩作用下的极限强度作了参数化分析。
In this paper, problems of bending of a thin plate under the action of in-plane forces are studied by using the method of multiple scales.
本文利用多重尺度法研究了薄板在中面力的作用下的弯曲问题。
By means of com programming, the bending and plane geometry feature recognition of blank layout for the car punch parts were completed in blank layout optimization.
用COM和特征识别技术实现了对轿车冲裁弯曲级进冲压件进行弯曲特征识别展开、毛坯排样几何特征图形的识别以及进行各类排样方式下的毛坯优化排样。
Generally, the contribution of bending stiffness out of plane in shear wall is neglected in engineering analysis.
在计算时一般都忽略剪力墙面外刚度的贡献。
The effects of the nonuniformity of porosity development and stress distribution on material bifurcations(plane shear bending and surface wrinkling)are investigated by means of numerical method.
利用数值方法研究材料空洞化和承受应力沿板厚分布的非均匀性对材料分叉(平板中平面剪切带和表面皱曲)的作用。
Cyclic plastic strains are analyzed for the pressurized elbow subjected to symmetric out-of-plane bending with finite element method (FEM) and the assumption of elastic-perfectly plasticity (EPP).
利用有限元法,采用弹性理想塑性模型,对受对称面外弯曲的内压弯管进行循环塑性分析。
A linear ultrasonic motor based on the two different in-plane bending modes of rectangular actuator were presented.
提出了一种矩形振子面内弯曲模态直线超声电机,分析了振子面内弯曲模态的激发原理及电机的驱动机理。
A linear ultrasonic motor based on the two different in-plane bending modes of rectangular actuator were presented.
提出了一种矩形振子面内弯曲模态直线超声电机,分析了振子面内弯曲模态的激发原理及电机的驱动机理。
应用推荐