This paper mainly discusses the confirmation of the steel plate flaw in the thick steel plate ultrasonic crack detection system.
这里论述了在中厚钢板超声探伤系统中，钢板缺陷的确定以及钢板缺陷位置的确定。
This paper suggests that the Article 40 in the Product Quality Law should fall within the liability of flaw payment.
我国《产品质量法》第40条的规定在性质上应为瑕疵给付责任，属于债务不履行的一种表现形态；
This paper introduces the quantitative evaluation of precise size and position of flaw by using data collected by ultrasonic data acquisition system.
文章介绍利用超声波数据采集系统采集的数据，实现对缺陷的大小及位置的精确定量。
Facing the flaw which existed in the protection aspect of the Wushu culture in recent years, the paper implemented comprehensive passive protection watershed to it.
面对武术文化近年来在保护方面存在的缺失，当前对其实施全面的消极保护意义重大。
This paper describes the features, principle and sorting method of the photoelectric sensor for surface flaw detection.
本文概述了表面缺陷光电传感器的特点、原理和分类方法。
This paper describes systematically the mathematical expressions of different flaw models and shows their quantitative relationship with natural defects, especially crack-like defects.
本文系统地叙述各种缺陷模型检出灵敏度的数学表达式，并指出与自然缺陷特别是裂纹类缺陷的定量关系。
The paper analysised the reasons of generating flaw and introduced the methods of improvement.
本文介绍桩身混凝土缺陷的原因分析和改进措施。
This paper gives a project of that improvement the machine for Affix Straw, in the paper, it demonstrates the elements , virtue and flaw to the machine for affix straw.
本文对粘管机的喷胶系统提出了改进方案，并论述了其机理和优缺点。
This paper mainly focuses on the impacts of flaw contribution on the shareholders.
本文主要研究瑕疵出资对股东权利的影响。
The traditional administration model of archives loaded by paper is unable to overcome the flaw itself.
传统的以纸质为载体的档案管理模式具有难以克服的缺陷。
Considering problem of the leading electrode of the Locomotive traction motor crack flaw, the eddy current testing method for leading electrode crack defect is researched in the paper.
针对机车牵引电机主极裂纹问题，本文深入地研究了用电涡流方法实现对主极裂纹检测的问题。
This paper introduce the composing, the key technology, trust model, at the same time, the flaw of PKI was discussed mainly.
文章介绍了PKI的组成、涉及的关键技术、信任模式，同时重点探讨了当前PK I所存在的不足和缺陷。
In this paper, analysis to casting flaw in centrifugal of cylinder is given, also concrete measures for prevention of it.
对气缸套离心铸造常出现的缺陷进行了分析，并提出了防止缺陷的具体措施。
The paper make a comprehensive analysis in the several aspects of material, process, operation and management so as to diminish the flaw and raise the quality of product.
本文从原材料、工艺过程、工艺操作和现场管理等方面对此进行了综合分析，以便减少缺陷，提高产品质量。
This paper deducts the piezo-constant expression of 0-3 type connectivity according to the basic definition of piezoelectricity, and amends the flaw of T.
本文从压电学的基本定义出发，推导出两相系0—3型连通性复合压电材料的压电应变常数表达式，进一步修正了T。
Firstly, the paper analyses the metadata method of quality management, points out its flaw.
首先对现行的元数据质量管理方法进行了分析，指出其不足。
This paper introduces the flaw of traditional similarity based on distance, and discusses a computed method about similarity based on proportion.
论文针对传统的基于距离相似度计算的不足，提出了一种基于比例的相似度计算方法，并对此进行了讨论。
Defects of crankshaft surface and body will produce important effect on engine reliability. This paper probes into flaw detection technology of forging steel and nodular cast iron of crankshaft.
曲轴表面及本体的缺陷，对发动机的可靠性有重要影响，对锻钢和球墨铸铁曲轴的探伤技术进行探讨。
This paper introduces the chip microprocessor achieves the problem of compensation for acoustic distance of the ultrasonic flaw detection in the ultrasonic flaw detection device.
主要介绍超声波探伤设备中，以单片机为核心实现超声波探伤中的声程补偿问题。
This paper analyzed the effect of corroded flaw interaction on remaining strength of line pipe with the finite element (FEM) analysis method.
采用有限元数值计算方法分析了腐蚀坑交互作用对管道剩余强度的影响。
In view of the fact that the present enterprise studies the aspect to have the flaw, this paper aim to improve operating performance evaluation model.
鉴于目前企业研究方面的所存在缺陷，本文拟对上市公司经营业绩评价模式的改进。
Considering the flaw of history simulation method, the paper adopts kernel estimation method to estimate parameters and their standard deviation, and then gives case analysis.
考虑到传统的历史模拟方法存在的缺点，采用基于核估计的历史模拟方法获得估计值及其置信区间，并用实例进行了分析。
This paper examines how to use AR Spectrum estimation method to improve the locating precision of the material 's flaw position in ultrasonic testing.
文中详细介绍了如何采用AR谱估计方法来提高超声无损探伤中对缺陷位置的精确定位。
This paper mainly discusses the confirmation of the steel plate flaw in the thick steel plate ultrasonic crack detection system. And the process of finding the flawed position is also discussed.
这里论述了在中厚钢板超声探伤系统中，钢板缺陷的确定以及钢板缺陷位置的确定。
After discussing the standard BP algorithm and its flaw, the paper presents a modified BP algorithm.
在对BP网络基本算法及其存在问题讨论的基础上，提出了一种改进的BP算法。
Based on a data acquisition system for ultrasonic flaw detection, the paper describes the effect of interference on data acquisition systems and methods for the suppression of interference.
基于超声探伤的数据采集系统，提出了各种干扰对系统的影响及干扰的抑制方法。
This paper analysed cause of flaw detection crack of LZ50 Axis slab of speeding up train and gave solution measures and plan.
综合分析了LZ50提速车轴坯的磁探裂纹的原因，并提出解决措施和方案。
This paper introduces the crow feet flaw on worsted cashmere knitwear and its studying status quo, analyzes the key affecting factors. The importance and necessity of its research are also described.
文章简要介绍了山羊绒精纺针织物中出现的鸡爪痕质量疵点及其研究现状，分析了产生鸡爪痕的主要影响因素，阐述了研究鸡爪痕问题的重要性和必要性。
This paper introduces the crow feet flaw on worsted cashmere knitwear and its studying status quo, analyzes the key affecting factors. The importance and necessity of its research are also described.
文章简要介绍了山羊绒精纺针织物中出现的鸡爪痕质量疵点及其研究现状，分析了产生鸡爪痕的主要影响因素，阐述了研究鸡爪痕问题的重要性和必要性。
应用推荐