In this paper, research on curing system of vulcanized silicone rubber aging tear strength after impact.
本文主要研究论述硫化体系对硫化硅橡胶老化后撕裂强度的影响。
Based on the principle of vortex effect in electromagnetics, a green curing method that is superior to traditional winter concrete curing is brought forward in this paper.
基于电磁学的涡流效应原理，提出了涡流感应加热法这种优越于传统混凝土冬期养护的绿色养护方法。
The basic structure and functions of the UV curing ink are introduced in this paper.
文章扼要介绍了紫外光固化油墨的基本组成及其功能。
Typical convection applications include heating, drying and curing of water and solvent coatings for textiles, films, paper, fibers, and metals.
典型的对流工艺包括加热，干燥和硫化水质和溶剂，应用于纺织，薄膜，纸，纤维和金属等应用领域。
According to the different papers, infrared drying or UV curing was selected, and then the cooling systems made the paper cool to improve the drying effect.
阐述全能纸张烘道系统主要组成，根据烘干物料的不同，选择红外线干燥或紫外线固化，烘干后经运风降温冷却，提高纸张的干燥效果。
Electron beam curing of various blends of epoxy resin was studied in this paper.
对几种环氧树脂混合体系的电子束固化进行了研究。
This paper describes the application of artificial intelligence control algorithm in curing kiln temperature control. It introduces in more details fot the construction and control.
介绍人工智能控制算法在养护窑温度控制中的应用，对其组成和控制做了详尽的介绍。
Some methods of research on waterborne epoxy resin are introduced systemically. And curing agents for waterborne epoxy resin is described in this paper.
系统介绍了水性环氧树脂的研究方法，并比较了各种方法之间的优劣，简要介绍了水性环氧树脂的固化。
This paper discusses the influence of the high performance curing agent on technical properties, as well as the economical properties of concrete cured by the agent.
通过试验研究了高性能养护剂对混凝土各项技术性能的影响，并分析了这种养护方法的技术经济性。
This paper provides preventing and curing measures for environmental problems exist in Loufan County by survey study.
文章通过调查研究，对娄烦县存在的环境问题提出了防治对策。
The straw-cement suitability and the manufacturing board technology were studied in this paper. The results showed that straw can hinder curing of cement.
麦秸与水泥的相适性以及制板工艺的研究结果表明，麦秸对水泥固化起到阻碍作用。
In this paper, the chemical systems, present status of studying and development, application fields and the development tendency of radiation curing adhesives were summarized.
本文介绍了辐射固化胶粘剂的化学体系，国内外的研究开发现状，应用领域和发展趋势。
In this paper, effects of different curing systems on performance of high volume fine mineral mixture of Reactive Powder Concrete were researched.
研究了不同的养护制度对大掺量矿物细粉活性粉末混凝土性能的影响，并通过孔结构和扫描电镜实验对其微结构进行分析。
In this paper is described the principle for and the experiments on curing of thermoset-ting resin with microwave heating.
本文介绍了热固性树脂用微波加热固化的原理，并报导了环氧树脂微波固化的实验研究。
In this paper, the curing pressure dependence of NBR-me-tal bonding of three common phenolic adhesives were studied.
本文研究了三种常用酚醛型粘合剂胶接nbr -金属模压件的固化压力依赖性。
In this paper the effect of size of silver particles, proportion, curing agent and curing condition on epoxy resin - low - molecular polyamide - silver particles system are studied and discussed.
本文着重从银粉的粒度、添加量和固化剂的种类、用量以及固化条件等方面研究和探讨了环氧-低分子聚酰胺-银粉导电胶体系的导电性及强度。
In this paper, several curing agent of polyurethane were synthesized. Influences of solid content and dosage of TDI tripolymer on different PU adhesion high initial bonding strength were discussed.
本文探讨了聚氨酯胶粘剂几种固化剂的合成及甲苯二异氰酸酯(TDI)三聚体的固含量、用量等对不同类型的聚氨酯胶粘剂初粘力的影响。
In this paper, laboratorial evaluation and industrial application of curing accelerator, imidazoline prepared from naphthenic acid were introduced.
对由环烷酸制备的咪唑啉环氧树脂固化促进剂在实验室进行了评价，并介绍了其在工业上应用的情况。
Strength and volume change laws of lime-stabilized soils under the conditions of various sodium sulphate contents, mixture ratios, curing temperatures and curing times were studied in this paper.
全面研究了不同的硫酸钠掺量、混合料组成、养生温度以及闷料时间等条件下的石灰类稳定土的强度和体积变化规律。
The influences of photoinitiator, crosslinking agent and cure time on the properties of UV curing pressure sensitive adhesive were discussed in the paper.
在常温下涂布后直接紫外光交联固化，考察了光引发剂、交联剂、光固化时间等因素对UV固化压敏胶综合性能的影响。
In this paper, effects of peroxide on curing reaction of modified BMI resin (designed as 4501a) with low dielectric loss were studied.
本文研究了有机过氧化物引发剂对低介电损耗的改性双马来酞亚胺树脂4501A固化反应的影响。
The property, use, instruction and application of rubber-metal curing bonding agent RM-1 were mainly introduced in this paper.
主要介绍RM-1橡胶金属硫化胶粘剂的性能、用途、使用说明及应用情况。
The paper reviewed the use of dielectric analysis to study the curing process of thermosetting matrix system including organic coatings and composites.
本文介绍了介电分析法在热固性树脂及以其为基体的涂料和纤维增强复合材料固化研究中的应用。
Researching on the new producing technique and curing mechanism of CO_2-cured phenolic resin binder in this paper is developed to be meet the requirement.
本文新型CO_2硬化酚醛树脂粘结剂的制备技术以及硬化机理的研究就是为适应这一要求而研究开发的。
Based on the characteristics of three different grain depots, the paper introduces the process of selection of materials, thermal insulation, concrete placing and curing.
文中针对三种不同粮库的工程特点，介绍了从原材料选择、现场保温措施、混凝土浇灌、养护等的全过程。
The significance of solid strength of concrete structure and the function of the concrete strength gotten under the same curing condition are discussed in this paper.
本文讨论了混凝土结构实体强度的意义，以及同条件养护强度的作用。
The paper research process factors for sulphuric acid curing copper sulphur concentrate.
本文对硫化铜精矿的硫酸熟化催化氧化浸出工艺条件进行了研究。
This paper describes the influences of some curing agents, plasticizers, filling materials on epoxy resin properties. An ideal compounding is obtained by orthogonal test method.
研究了不同种类固化剂、增韧剂、填料及用量变化对环氧树脂综合性能的影响。运用正交实验总结出了一组最佳配方。
This paper describes the influences of some curing agents, plasticizers, filling materials on epoxy resin properties. An ideal compounding is obtained by orthogonal test method.
研究了不同种类固化剂、增韧剂、填料及用量变化对环氧树脂综合性能的影响。运用正交实验总结出了一组最佳配方。
应用推荐