Time tension time for which the tension may stay out of tolerance.
计时张力计时为哪一张力可能容许度外出。
Mating connectors with out of tolerance pin depths may destroy the connector.
若与超出插针深度容差的连接器匹配，则可能会损坏连接器。
Repair: Product that is either visually or dimensionally out of tolerance but which can be repaired.
修复：能被肉眼观察到的或尺寸超差但能被修复的产品。
SCRAP : When product that is either visually or dimensionally out of tolerance and can not be repaired; product that does not conform to blueprint tolerances.
废品：目测不合格或尺寸超差并且无法修复的产品；无法达到图纸公差要求的产品。
Has the date from the gauge, fixture and the test control system been used to adjust the calibration recall or preventive maitenance schedules to eliminate out of tolerance conditions?
预定日期以及测试控制系统是否已经用于调整校准或者用于预防性的维护来去除公差。
If a particular instrument model is found out of tolerance, however, engineers will look at the impacts that an out-of-tolerance instrument has on testers and ultimately on weapons systems.
如果发现某台仪器型号超出容许范围，则工程师会探寻超容许范围仪器对测试仪以及对最终武器系统的影响。
It is a virtue and a quality, but above all, tolerance is an act - the act of reaching out to others and seeing differences not as barriers, but as invitations for dialogue and understanding.
宽容是一种美德和品质，但最重要的是，宽容是一种行动——向他人伸出联络之手的行动，不将差异视作障碍，而是一种邀请，借以实现对话和了解。
Another way that zero tolerance lives itself out is in the writing of boys.
另一种在生活中的零容忍度是有关男孩的写作。
Out of this fusion came an idea that we Americans believe central to our identity tolerance.
源于这种融合而产生的一个观念就是包容，我们美国人认为这是我们特征的核心。
Out of this fusion came an idea that we Americans be-lieve central to our identity: tolerance.
源于这种融而产生的一个观念就是包容，我们美国人认为这是我们特征的核心。
The main works done by the author are listed below: the essentials of real-time and fault-tolerance in the distributed system are analyzed, and the necessity of their fusion is pointed out.
作者在本论文中的主要工作如下：分析了分布式系统中实时性和容错性的本质，以及两者融合的必然性。
Moreover, with the supplied Menu function, one can easily mark out the surface rough rate and its tolerance of position on the diagram.
利用系统提供的菜单功能，能方便地标注表面粗糙度和形位公差。
Heat ageing, natural ageing and water tolerance etc. tests are carried out to study and improve the ageing resistance of copper conductive adhesive.
将铜导电胶进行热老化、自然老化、耐水等试验，以研究其老化性能，并探求改善铜胶抗老化性能的途径。
In the traditional method, the design of products or the design of parameters in the process planning usually carried out before the design of tolerance.
传统方法中，产品设计或过程规划的参数设计一般先于容差设计。
'the more often we step out of our comfort zone, the more we build our tolerance for risk-taking,' she says.
她说，“我们越经常踏出我们感觉踏实的地带，我们对风险的容忍度就会越高。”
Pot experiments were carried out to study the variation of cadmium tolerance and accumulation in 16 tobacco cultivars.
通过盆栽试验研究了16个烟草品种吸收与忍耐镉的差异。
Through collection, sorting out and analysis of data, more than 10 kinds of indicators can be used in salt tolerance identification of wheat.
通过对近10年国内外研究资料的整理和分析认为，有10多项指标可用于小麦的耐盐性鉴定。
The processing is detailed analyzed, the groove position exceeding tolerance factors are gave and measures of controlling groove-tolerance are worked out.
对加工过程进行详细分析，指出止动槽位置超差因素并制定了控制止动槽超差措施。
If a tube is out-of-round or outside of the tolerance range, it is identified as faulty and is not filled.
如果某管筒不是圆形或者处于误差范围之外，会将其识别为缺陷，并且不予填装。
The data and conclusion given in the paper provide important reference values for future aircraft structure design and out-of-tolerance problem disposal.
本文给出的数据和结论对实际飞机结构设计的参数确定和生产过程中的超差问题处理具有重要参考价值。
The inconsistent roundness of raw materials, even processed properly, can be thanked for the out-of-roundness-tolerance products.
原因是市场采购的原料不能保证圆度，加工后出现圆度超差。
This article introduces relation, substitution and implement of radial run-out tolerance and axiality tolerance with legend and production process.
结合图例和生产工艺论述了径向跳动公差与同轴度公差的关系、取代及工艺实施。
In the long term of production of the low alloy heat-resistant bolting steel, the out-of-tolerance of hardness is the one of the primary causes that leads to the rework of heat treatment.
在长期的生产中，低合金耐热螺栓钢硬度超差是造成该材料热处理返修的主要原因之一。
Working-out tolerance and qualifications of jigs is a stress of teaching and embodiment of professional qualities, but it has been overlooked.
夹具公差和技术要求“凭什么制订，怎么去制订”是教学重点，也是技术人员专业素质的体现。
The hope is that peace, tolerance, and compassion can flow from the confluence of the two rivers at Sanjhan and out to the rest of the world.
期望和平、包容及怜悯可于两条河流在三栈的交会点流向世界。
On inspecting aspect, the job is to prevent or reduce out-of-tolerance and reject due to the burr.
在检测方面，防止或减少因毛刺存在使检测超差，废品增多。
The coaxiality tolerance assesses the deviation of the axis from the datum axis, while the radial run-out tolerance assesses the deviation of the circumference line from a coaxial circle.
同轴度公差评估的是轴线相对于基准轴线的偏差，而径向跳动公差则评估的是圆周线相对于同轴圆的偏差。
As you can see from the above results, none of the power supplies tested broke the 5% tolerance levels that the ATX specs set out.
正如你可以从以上结果看，电力供应没有测试，打破了5%的耐受程度，该列的AT X规格。
Other causes include the out - of - tolerance of blade chord width between adjacent blades, the undersize contact area of serrated working side and the local wearing of non - working side.
而相邻原机件叶片弦宽尺寸超差，锯齿形工作接触面积小，以及非工作面局部碰磨，是引发故障的次要因素。
Other causes include the out - of - tolerance of blade chord width between adjacent blades, the undersize contact area of serrated working side and the local wearing of non - working side.
而相邻原机件叶片弦宽尺寸超差，锯齿形工作接触面积小，以及非工作面局部碰磨，是引发故障的次要因素。
应用推荐