The orthogonal surface equation of the collimating micro-lenses array is derived, the divergence angles after collimating and the parameters of the focused lens are calculated.
推导出了正交的两组准直微透镜阵列的面形公式；计算了准直光束的准直精度和聚焦光学系统参数。
The three-dimensional flow field of a centrifugal impeller for aircraft cooling turbine is computed with quasi-orthogonal surface method including the influence of upstream and downstream conditions.
用任定准正交面方法对一个航空涡轮冷却器的离心压气机叶轮流场进行了三元计算，计算考虑了上下游边界条件的影响。
The general idea is that you need a direction vector that is orthogonal to the lit surface.
总的来说，您需要一个与照射平面相垂直的方向向量。
A calculating formula for surface integrals under orthogonal transformation of space coordinates is given.
给出曲面积分在空间坐标的正交变换下的一个计算公式。
The effects of grinding parameters on surface roughness of Marine propeller blade were studied by using orthogonal test.
通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。
Its most striking feature is the way the smooth surface of the living area is cut by an irregular orthogonal grid of rustication.
其中最引人注目的是生活区的光滑表面，由粗琢不规则的垂直网格切割而成。
Orthogonal experiment shows that the time is the main factor of removal rate and abrasive granularity is the crucial factor of surface roughness.
通过正交试验证明加工时间是影响去除量的主要因素，而磨料粒度对表面粗糙度影响较大。
The factors influencing rising delaying time of liquid surface in low pressure casting were investigated by orthogonal testing for hydraulic simulation.
采用水模拟正交试验研究了影响低压铸造液面上升延迟时间的各因素。
The surface diffusion model were established to simulate the adsorption process of sisomicin on the exchange resin D113. The model was solved by orthogonal collocation method.
在动力学研究中，建立了西索米星在D113（皖）树脂上的吸附表面有效扩散模型，利用正交配置法求解动力学模型。
In this paper a method of using discrete orthogonal polynomials to fitting local surface of object in order to detect characteristics of range images is presented.
本文介绍一种利用离散正交多项式进行物体表面局部曲面拟合以检测物体的特征的方法。
Four kinds of soy protein was modified by Transglutaminase, surface hydrophobicity of protein was measured under different conditions, and single factor and orthogonal experiments was determined.
本课题首先根据转谷氨酰胺酶修饰四种蛋白，测定其在不同条件下蛋白表面疏水性的变化趋势，并进行单因素及正交实验。
The mode currents form a weighted orthogonal set over the conductor surface, and the mode fields form an orthogonal set over the sphere at infinity.
经典特征模理论提供了一套在导体表面形成加权正交系的特征电流，在无穷远球面上形成正交系的特征场。
The surface strain of the orthogonal plate is measured under the action of the planar stress field, and the error is analyzed.
对受平面应力场的作用的正交异性板的表面应力，应变进行了实测研究。并对测试误差进行了分析。
To achieve a completely uniform temperature distribution on the thin strip surface, orthogonal experiment is used for optimizing the heater structure.
为了使薄板表面的温度均匀分布，应用正交试验法对感应加热器的结构进行了优化。
At realm of surface roughness of machined surface, forecast mathematical model is set up by using quadratic regression orthogonal design between NC turning parameter and machined surface.
在已加工表面粗糙度研究领域引入回归正交分析，采用多元二次回归正交设计得到了数控车削参数与已加工表面粗糙度的回归预报模型。
Orthogonal experimental method and ANOVA are used to analyze machining parameters on electrode loss and surface roughness;
在优化实验的基础上系统分析了电规准对表面性能、加工损耗的影响；
The surface alloying of steel castings without fusing agent was studied by means of orthogonal experiment design.
利用正交试验方法研究了铸钢件的无熔剂表面合金化。
In a preferred embodiment, these field are orthogonal and parallel to the skin surface, respectively, and applied in a temporally alternating sequence.
在优选实施例中，这些场分别正交于和平行于皮肤表面，并以时间上交替的顺序施加。
The whole process can be divided into two steps: First, the method of surface fitting with discrete orthogonal polynomial is applied to detection of edge position.
整个处理过程分为两步：第一，采用离散正交多项式曲面拟合技术探测边缘位置；第二，运用松弛标定网突出有意义的边缘结构和压缩噪声边缘。
On this basis, the orthogonal test of leaded brass C3602 was made on the domestic lathe CD6140A and the influence of various factors and levels on surface roughness was analyzed.
以此为基础，在国产CD 6140a型车床上对C3602铅黄铜进行了正交切削试验，分析了各因素水平对工件表面粗糙度的影响。
Second we present the convolution surface and curve correspondence theorem under orthogonal projection, which provide a bridge between 2D image contour and 3D human model.
本文提出了正交投影下卷积曲面和曲线对应的概念和相关定理，为二维的图像轮廓和三维人体模型之间的架起一道桥梁；
The four aspects is as follow:(1) Modelling a free curved surface from the orthogonal projections and the normal vectersof controlling points.
这四个方面分别是：（1）已知数据点的正投影和曲面上数据点处的法线方向，构造自由曲面；
Material removal profile is proposed to describe the depth of material removal orthogonal to the tool path on a mold surface.
提出用表面去除廓形来描述模具表面在垂直于抛光轨迹方向的抛光去除量。
In addition, the orthogonal complete complementary codes for MIMO surface radar is also studied in this paper, so the transmit signals can be separated by correlation processing at the receiving sink.
另外，论文针对MIMO地波雷达，研究了具有正交特性的完全互补码，这样在接收端通过相关处理，就可以实现各路发射信号的分离。
Composites process is optimized by orthogonal regression design method. The result shows that this composites is of good property and fiber binds well with resin matrix surface.
采用正交回归设计的试验方法优化复合材料工艺，所制得的复合材料性能优异，纤维与基体界面粘接良好。
The optimal production parameters were confirmed through orthogonal test by using specific surface area and loose bulk density as assessment indicators.
以陶粒的比表面积和松散容重为考核指标，通过正交试验，确定了陶粒的最佳制作工艺参数。
With orthogonal experiment, the effect of the cutting parameters on the surface quality during uew-model ceramic tools cutting is researched, and a preliminary optimal pr...
同时用正交试验法研究了新型陶瓷刀具加工时的切削用量对表面质量的影响，初步得到了切削用量的优化方案。
The effect of broaching rate and feed per tooth, tool orthogonal rake on residual stress of workpiece surface are analyzed by Broaching GH761 Alloy.
这里分析了GH761 合金拉削时，速度、齿升量、拉刀前角对拉削表面残余应力的影响。
The effect of broaching rate and feed per tooth, tool orthogonal rake on residual stress of workpiece surface are analyzed by Broaching GH761 Alloy.
这里分析了GH761 合金拉削时，速度、齿升量、拉刀前角对拉削表面残余应力的影响。
应用推荐