In recent years, people have proposed a new on-chip communication architecture -. Network-on-Chip.
近几年来，人们提出了片上网络这种新型的片上通信架构。
Experimental results demonstrated that our random routing algorithm has lower latency, lower power consumption, and can provide on-chip communication with high reliability.
实验结果表明，该算法具有较短的延迟，较低的功耗，并能提供高可靠的片上通信。
A step has been taken toward enabling such node-to-node communication, courtesy of a consolidated radio with an on-chip antenna.
内置天线的强化无线电收发器，使之朝着点对点通讯迈进了一步。
Then supplies realization of Encryption Chip based on Permutation Code by EDA, and integrates the modular of signal gathering so the chip can be used in voice communication encryption.
通过EDA设计技术实现排列码加密算法，并在加密芯片中集成了信号采集模块，可以使该芯片应用到语音通讯加密当中。
This paper introduces the design of a voice communication system based on the AMBE-2000TM vocoder chip.
介绍了应用ambe- 2000TM声码器芯片设计的语音通信系统的具体实现方案。
This system base on power line communication chip STALON3000A which manufactured by STA company in Australian.
本文就是根据澳大利亚STA公司的电力线载波通信芯片STALON3000A进行系统的设计。
The basic structure and principles of wearable medical system on chip were introduced and the performance of different wireless communication standards for wearable medical chip was summarized.
概述穿戴式医疗系统芯片的基本组成和工作原理，对适用于穿戴式医疗芯片的无线通信技术标准进行讨论。
The WISHBONE bus is suitable for system communication on chip and configurable.
内部总线采用适合片上系统通信，高可配置性的WISHBONE总线。
This paper introduces a method of improving the real? Time on main single chip computer serial communication and the background programs in the complicated distributed system.
介绍在复杂的主从分布式系统中提高主机串行通讯与背景程序实时性的一种方法。
Such run time adaptive network on chip will adapt the underlying interconnection infrastructure on demand in response to changing communication requirements imposed by an application and context.
通过这些片上自适应网络元件与体系，将来物联网中的基本通信跟交互设施将可能根据环境跟利用中始终变更的通信须要自主的进行恰当的响应。
Network on Chip (NoC) is an emerging IC architecture that cope with the increasing complexity and communication requirements of current System on Chip (SoC).
片上网络作为一种全新的集成电路体系结构，可以很好的解决随着复杂度的增加所带来的片上通信需求问题。
Ti is the biggest processor on mobile phone market and communication chip supplier, but the competition on this market is unusually intense.
TI是手机市场上最大的措置器和通信芯片供货商，但该市场上的竞争异常强烈。
The multicast routing method has been applied into the Network on Chip (NoC) since traditional unicast communication cannot meet the increasingly rich application requirements of NoC.
为了满足片上网络日益丰富的应用要求，多播路由机制被应用到片上网络，以弥补传统单播通信方式的不足。
As fast growing of consumer electronics market, System-On-Chip are widely applied to portable battery powered equipments and wireless communication products.
随着消费类电子市场的蓬勃发展，片上系统在手持音频设备和无线通信领域得到了广泛的应用。
Combining with old transistor curve grapher, using single chip computer and serial port communication, the transistor characteristic curves is displayed on the microcomputer.
将其与传统的晶体管图示仪相结合并通过单片机和串行通信在微机上显示晶体管特性曲线。
This system realized a voice communication system based on the AMBE2000, this chip USES the MBE algorithm to obtain low changeable communication rate, and high speech quality.
本次系统实现了基于AMBE2000的低速率语音通信，该芯片采用改进的多带激励(MBE)算法，能实现可变速率低比特率、高语音音质的语音压缩编码。
Based on 80c196 single chip processor, using the technologies of sensor, photoelectric isolation and serial communication, the system can measure all parameters of motor test.
该系统以80c196单片机为核心，利用传感器、光电隔离及串行通信等技术，实现了对发动机所有试车参数的测量。
A single chip microcomputer development system based on DMA communication technique is proposed in this paper.
本文提出一种借助于DMA通讯技术实现的单片机开发系统设计方案。
Based on the traditional wireless communications limited transmissions is limited, based on the NRF905 rf chip design of two-way communication system and MCU control unit mainly.
针对传统无线通信是单向传输的局限问题，设计了基于nRF 905射频芯片的双向通信系统并以单片机为主控制单元。
Therefore, it will have a bright future to develop VLSI chip based on a PCI bus and related a communication protocol.
因此研究开发基于PCI总线接口和通信协议的超大规模集成电路芯片是具有应用前景和市场价值的。
Based on introduction of communication integrated circuit CSC5087, SC8870, the interface with singal chip computer and its application are presented.
在介绍通讯集成电路CSC5087和SC 8870的基础上，给出了与单片机的接口方法和应用。
It included five parts of driving, control, communication, computation and feedback based on DSP chip TMS320LF2407.
该系统包括驱动、控制、通信、计算和反馈五部分，并DSP芯片TMS320 LF 2407。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
In the paper, a design of OSD system based on video format convert chip is introduced, including the realization of I2C communication, data-pass and overlap of image and video.
本文设计并实现了基于视频格式转换芯片的OSD系统，实现包括I2C串行通信，数据通路和OSD图像与视频叠加的功能。
Based on the spread spectrum communication theory, combine digital signal-processing chip DSP and FPGA, this article researches and designs the receiver system for regional radio navigation.
本课题以扩频通信为理论基础，结合目前广泛使用的数字信号处理芯片DSP和FPGA，研究了区域无线电导航系统接收机数字信号处理平台。
This paper studies the signaling system suitable for wireless link of the digital mine mobile communication system based on TRF6900 single chip, which operates in TDMA mode.
文章论述了基于射频芯片TRF 6900、多址方式为TDMA的矿井移动通信系统无线部分信令的结构设计。
An infrared sensing and controlling system and a wireless communication system based on Single Chip Micyoco, which can realize some functions such as move, are adopted.
采用基于单片机的智能化红外感应控制系统、无线通信系统，实现自动开关桶盖并调节开盖角度、遥控垃圾桶走动、智能封袋的功能。
This terminal's hardware design mainly includes the choice of microprocessor chip, the interface design of MC35 module of communication, the circuit design of memory modules and serial port and so on.
该终端的硬件设计，主要包括微处理器芯片的选型、MC35通讯模块的接口设计、存储器单元及串口电路设计等。
The essay introduces multi-chip calculator communication system based on RS-485 bus, especially MAX-487 chip and the components of the communication system and gives the flow diagram.
介绍了基于RS-485总线的单片机多机通信系统，重点介绍了MAX-487芯片和通信系统的组成，并给出了流程图。
This paper introduces a design of a CAN bus adapter system based on a new type of USB chip CH372 for the communication of the CAN bus and the computer.
介绍了一种基于新型USB接口芯片CH372的CAN总线网络适配器系统的设计，提出了一种使用USB接口实现CAN总线网络与计算机连接的方案。
应用推荐