Do you wish to configure another NAT network?
你想不想再配置的NAT网络？
To setup NAT networking you need to select a network number that is normally unreachable from the host.
要正确设置NAT网络，必须选择一个从宿主机无法访问的网络地址。
To setup NAT networking you need to select a network number that is normally unreachable from the host.
要正确设置NAT网络，我们必须选择一个从宿主机无法访问的网络地址(笔者注：和宿主机物理网卡不在同一个网段)。
While Bridged networking requires a constant physical link to a network, NAT networking is much more flexible and mobile, even when working over your wireless or VPN connection.
桥接连网需要一条到网络的永久物理链路，而 NAT连网灵活得多，在使用无线或 VPN 连接时甚至可以移动。
NAT only translates traffic which travel between the inside and outside network and is specified to be translated.
NAT仅转换在内部和外部网络之间被指定需要被转换的流量。
You can create an access list of IP addresses that tells the router which computers on the network require NAT.
你可以创建一个IP地址的访问列表，告诉路由器网路中哪些计算机需要NAT 。
So any external network sees the NAT router's IP address and the port number assigned by the router as the source computer information on each packet.
这样任何一台处于外部网络的计算机都会在发送给它的数据包里找到NAT的IP地址和由路由器分配的端口号。
On the virtual Ethernet connection's capability, set the type of connection to the host system's network connection to use, such as bridged, host-only, or NAT.
对于虚拟以太网连接的功能，您可以将连接的类型设置为主机系统的网络连接，以使用，例如桥连的，只有主机的或者NAT。
In the example below the NAT router is configured to translate unregistered IP addresses (inside local addresses) that reside on the private (inside) network to registered IP addresses.
在下面的例子中，nat路由器被配置来将处于私有(内部)网络中的未注册IP地址(内部地址)转换成注册ip地址。
When a computer on the stub domain that has an inside local address wants to communicate outside the network, the packet goes to one of the NAT routers by way of normal routing to the default-gateway.
当一台在存根域 (网络) 中被分配了内部本地地址的计算机想要和外部网络通信时，数据包就会像通常一样被路由到其默认网关，此时网管充当NAT路由器功能。
Nat Geo Wild is a rare example of a network that was developed abroad and imported to America.
《国家地理野生频道》是极少的在海外制作再进口至美国的电视网的例子。
Now, add the NAT rule. Right click, and select Map your private address name to your public address name, and select the line name of your physical network adapter.
将私有地址名称映射到公共地址名称，并选择物理网络适配器的线路名称。
Win4Lin sessions can be configured with bridged networking or network address translation (NAT) networking.
Win4L in会话可以配置为使用桥接连网或网络地址转换(NAT)连网。
As the supply of new, unique IPv4 addresses dwindles, some enterprises and service providers will use traditional NAT （network address translation） to conserve the addresses they already have.
随着新的、唯一的IPv4地址供应数量的下降，一些企业和服务提供商使用传统的NAT（网络地址转换）技术作为保持现有地址的措施。
NAT technology maps an external public IP address to an internal IP address within the Amazon EC2 network.
NAT技术将外部公共IP地址映射到AmazonEC2网络中的内部 IP 地址。
The NAT router translates traffic coming into and leaving the private network.
NAT路由器传送进出私有网络的示意图。
Mobile networks typically use an IPv4 NAT to allocate devices one of the "private" classes of network, such as the 10.x.x.x network or the 192.168.x.x network commonly found at hotspots.
移动网络通常都会使用IPv4NAT为每个设备分配一个“私有”类型的网络，比如人们在热点通常会找到10.x.x.x网络或是192.168.x.x网络。
This means that it's behind a Network Address Translation (NAT) and therefore cannot receive inbound connections.
这意味着它无法通过网络地址转换(NAT)，因此不能接收呼入服务。
They've tended to buggy NAT implementations (such as being unable to contact your external address from the inside network), limited settings, bad DHCP implementations, and the like.
它们已经趋向于有缺陷的NAT实现（如不能从内网连接外部地址）、有限的设置、不好的DHCP 实现之类。
As shown in Figure 7, we chose network address translation (NAT) because it allows our virtual machine to access networked resources without unnecessarily exposing it to other network machines.
如图7所示，我们选择networkaddresstranslation (NAT)，因为它允许虚拟机访问连网的资源，而不必向其他网络机器暴露它。
For this scenario, we will select Use network address translation (NAT).
在这里，我们将选择usenet workaddresstranslation (NAT)。
If you are reading this, you are most likely connected to the Internet and there's a very good chance that you are using Network Address Translation (NAT) right now!
如果你正在阅读本文，那你很有可能已经连上了因特网，这就是你用网络地址转换(Net work Address Translation,NAT)的一个很好的机会！
IPV6 technology is still in study and has not totally replaced existing IPV4 network yet, the short-term solution, NAT technology, is very important for abating the problem of lacking address.
IPV 6技术尚在研究中且还未完全取代现有的IPV 4网络的情况下，短期解决方案——NAT技术对于缓解目前的地址缺乏问题显得尤为重要。
NAT would do network address translation for outbound packet so that inside hosts can use reserved IP addresses and outside hosts can not visit inside ones directly to realize one-way communication.
NAT对内网主机的出网数据包进行网络地址变换，内网主机可以使用保留地址上网，外网主机无法直接访问内网主机，从而实现单向通信。
NAT technology enables private IP networks that use nonregistered IP addresses to connect to a public network.
NAT核心思想：将私网地址转换成公网地址，从而连接到公共网络。
Clients may also need Network address Translation (NAT) when there are multiple internal computers and only one public IP address.
当有多台内部计算机和一个公共ip地址时，客户端可能也需要网络地址转换(NAT)。
It was introduced the network address resolution with technical Angle, introduce the function and implement method of network address translation (NAT).
从技术的角度介绍了如何配置网络地址解析，介绍了网络地址翻译(NAT)的功能以及其实现方式。
AT last according to the results of tunnel and NAT-PT experiment we can certify the technical feasibility of the compositive network scheme.
最后通过隧道实验、NAT - PT实验验证综合组网方案的技术可行性。
If the devices are using NAT or in simple Network system to send still no problem.
如果设备使用NAT或简单的网络系统仍然不会有问题。
If the devices are using NAT or in simple Network system to send still no problem.
如果设备使用NAT或简单的网络系统仍然不会有问题。
应用推荐