This paper introduces hydraulic vibration-exciting system for marble moulding machine, and pats forward rational selection method of vibration. parameter for the system controlled by rotary valve.
本文介绍了应用于再造大理石成型机的液压激振系统,并提出了应用转间控制的系统其振动参数的合理选择方法。
The paper provides basis for making a choice in impact moulding type, assistance in installation, commission and operation of the impact moulding line.
本文对选择冲击造型方式、指导安装、调试、使用提供依据。
This paper studied and discussed the technological process and moulding condition of long (lump) moulding charcoal with biological substance and starch.
研究探讨了以竹材加工剩余物粉炭、淀粉为原料制造棒(块)状成型炭的工艺过程和成型条件。
This paper mainly presents that constructional mid-carbon alloy steel, after bulk moulding deformation, heat treatment and cold surface deformation can raise fatigue strength of materials effectively.
本文主要介绍中碳合金结构钢经整体塑性变形、热处理后再进行表面冷变形工艺是提高材料疲劳强度的有效途径。
The paper provides basis for making a choice in impact moulding type, assistance in installation,...
本文对选择冲击造型方式、指导安装、调试、使用提供依据。
The paper introduce the moulding and sinter technology of a new kind of tyrannous cathode.
本文介绍了一种新型压制阴极的成型与烧结技术。
The paper studies the microstructures of the cokeite and the high, middle metamorphic coal, formed by the metamorphism of magma in view of the need for producing moulding coal and coke.
本文从生产型煤和型焦的需要出发,研究岩浆变质作用所形成的天然焦炭和高、中变质煤的显微结构。
This paper briefly introduces the material selection, structural design and moulding process of composite blades for giant wind power turbines.
本文对大型风力发电机复合材料叶片的材料选择、结构设计和成型工艺作了简要的介绍。
This paper on the basis of analysis of moulding mode of glass mosaic roller-plate and roller-roller form and the selecting stndard, discusses the principles of design and manufacture about cutter.
文章在分析玻璃马赛克辊板式和对辊式、成型方式及其选择原则的基础上,论述了对辊式成型机的成型模具切刀设计与制造原理;
The influences of processing parameters, material properties and screw design on melt temperature distribution in reservior during injection moulding are described in this paper.
本文叙述了注射成型中加工参数、物料性能及螺杆结构对存料区熔体温度分布的影响。
This paper researches on 4100QB Cylinder-block of the KW moulding line, particularly introduces the forming mechanism of blowholes on 4100QB Cylinder-block.
本论文以在KW造型线上生产的4100QB机体作为研究对象,详细介绍了4100QB机体产生的侵入性气孔的形成机理。
The HWS moulding line was introduced briefly and its hydraulic system was introduced in detail lin this paper. Some typical hydraulic cycle system were analyzed also.
简要介绍了HWS静压造型线的组成,较详细地介绍了HWS静压造型线的液压系统的组成,并分析了该线的几种典型液压回路。
In this paper, a monolithic nickel catalyst was prepared by the powder moulding, and the preparation conditions and influence factors were studied.
本文采用粉末模压法制备金属镍催化剂,并研究了催化剂的制备条件及其影响因素。
This paper describes the moulding technique of the pellet detergent.
简单描述了颗粒洗衣粉的成型技术。
The paper discussed the technological process of pelletization of woody fuel, along with moulding condition and structure of moulding machine.
论述了以木质为原料制取颗粒成型燃料的工艺过程和内压滚动式成型机的结构以及成型条件。
This paper introduces a two-stage screw for injection moulding flame-retardant ABS.
本文介绍了成型阻燃ABS二段式注射螺杆。
A way of setting up a control and monitor system of an injection moulding machine is introduced in this paper.
介绍一种运动控制与监测系统的实现方法。这种运动和监测系统可用于注塑成型工艺过程的研究。
The moulding mechanism and the moulding techniques of microcellular foaming materials are emphasized in this paper.
着重介绍了微孔发泡高分子材料的成型机理和成型工艺。
This paper analyses the process, characteristics and requirement of the lowering of the internal stress of the PC products in the moulding.
分析和指明了PC制品在注塑成型生产中各个方面降低制品内应力的工艺方法、特点及要求。
This paper mainly analyzes the causes of the development of the moulding and veined pattern in Chinese ancient bronzes.
文章分析了古代青铜器造型与纹饰演变的原因。
This paper analyses the technological process of moulding sand compounding, and con - trolled by PC, then yields good results.
本文分析了型砂配制的工艺,用PC对其进行了控制,获得了良好地控制效果。
This paper introduces the craft characteristics of casting the shell of the gearbox, including the manufacturing of the resin moulding, the application of the hard sand core and so on.
针对变速箱壳体毛坯铸造的工艺特点,介绍了其树脂模具的制造、树脂自硬砂砂芯应用等关键环节的技巧和做法。
This paper introduces the size, seam form, moulding technology, the clamp part's selection, use and installation of super_high molecular weight polythene abrasion resistant lining board.
介绍超高分子量聚乙烯耐磨衬板的尺寸,砌缝的形式,成型工艺,紧固件的选用及其使用与安装。
This paper described the formulating, moulding technology and properties of modified PE foam slippers in detail.
对改性PE泡沫拖鞋的配方设计、成型工艺、产品性能等进行了详细阐述。
This paper introduces the production technology of the injection and extrusion moulding of Nylon 11. The problems emerged in the production and their solving methods are discussed.
介绍尼龙11的注射成型和挤出成型工艺,并讨论了生产中易出现的问题及其解决办法。
Fault diagnosis and maintenance technique for the hydraulic system of plastic-injection moulding machine are analytical from theory to practice in this paper.
文章从理论和实践方面对注塑机液压系统故障诊断与维修技术进行了分析研究。
A splines method in refined grid points for face moulding is presented in this paper which can be used in the corner of the eyes and the corner of the mouth that need to know some details.
本文对人脸造型给出细分网格样条方法,在要细微造型的眼角、嘴角等地设立细分网格,一次成型。
In this paper, the contents, method, procedure and evaluation of vocational moulding education experiment for blind pupils are introduced.
本文介绍了盲生职业陶冶教育实验的内容、方法、程序和评估。
In this paper, the impact of draft Angle to the moulding dimensions and the comprehension of the dimensions in plastic production with the unlabeled tolerance were discussed.
本文通过论述模具脱模斜度对模具尺寸的影响、塑料件未注公差的确定,并通过一个设计实例进行了说明。
In this paper, the impact of draft Angle to the moulding dimensions and the comprehension of the dimensions in plastic production with the unlabeled tolerance were discussed.
本文通过论述模具脱模斜度对模具尺寸的影响、塑料件未注公差的确定,并通过一个设计实例进行了说明。
应用推荐