With the speed controller on the push handle the attendant can easily control the motor power while guiding the chair.
随着对随之而来的推手柄可以方便地控制电机功率，同时指导椅子速度控制器。
The control system utilizes a sliding mode observer for the generation of all controller feedback information by means of non-speed information, such as voltage, current and parameters of motor.
利用非速度信息，如：电机的电压、电流及电机本身参数，通过滑模观测器产生控制器所需的速度反馈信息。
It's introduced that the controlling system in raising and reducing speed of stepper motor that is based on core controller, TMS320LF2407A, communicates with PC, as well as the method of programming.
本文介绍了以TMS320 LF 2407a为核心控制器的步进电机自动升降速控制系统与PC机的通讯及程序设计方法。
In the paper, the hardware circuit design of a DSP-based Brushless DC Motor Controller is given, which includes a current loop, a speed position loop, and IPM (Intelligent Power model) driver.
本文提出了一种基于DSP的直流无刷电机控制器的硬件电路，包括电流环、速度位置环和IPM(智能功率模块)驱动的硬件电路设计。
In this paper, design a fuzzy controller and applied to the induction motor speed-frequency governing system.
本文设计了模糊速度控制器并应用于异步电动机变频调速系统中。
The switched reluctance drive is a new variable-speed motor system which consists of power electronically-switched circuits, doubly salient reluctance motor and controller.
开关磁阻电机是由功率开关电路、双凸极磁阻电机及控制器构成的新型调速电动机系统。
The adaptive flux controller and speed controller based on neuron are presented for the induction motor vector control.
提出了基于神经元的用于感应电机矢量控制的自适应磁链和转速控制器。
A nonlinear speed controller for permanent magnet synchronous motor based on adaptive backstepping control was designed, which USES second-order filter to smooth the speed reference.
设计了一种基于自适应反步控制的永磁同步电动机非线性速度控制器，采用二阶滤波环节平滑速度指令。
The feasibility of designing controller for control permanent-magnet synchronous motor speed is proposed by using differential geometry theory.
对采用微分几何方法设计永磁同步电机转速控制器的可行性进行了研究。
A controller (52) actuates the motor at the target rotational speed.
控制器(52)使电动机在目标旋转速度开动。
The cam controller allows the AC servo motor to run at different speed for different angles, and to turn on and turn off twi.
设计的凸轮控制器可实现对AC伺服电动机进行分段变速控制以及凸轮一周中的两通两断的控制功能。
The thesis introduces design peculiarity of motor bike, and puts forth a method to define rated speed and power to provide design parameter for the motor and controller.
介绍电动自行车电机的设计特点，提出一种确定电机额定转速及功率的方法，提供电机及控制器的设计参数。
Applications of decimal Fraction frequency divider in the area such as direct digital frequency synthesis technology and stepper motor drive speed controller a re introduced.
在此基础上，介绍了小数分频器在直接数字频率合成技术和步进电机驱动速度控制中的两种常见应用。
A good controller is crucial to speed control of brushless DC motor, so it is important for brushless DC motor to find out a good control method.
控制器对无刷直流电动机的转速控制至关重要，因此研究无刷直流电机的控制策略十分重要。
First, speed control of motor based on DSP is designed with this platform, which approves good performance and good precision of DSP controller.
首先，在所搭建的试验平台上，用软件设计了无刷直流电动机的全数字双闭环调速控制，验证了DSP控制器的高性能、高精度等优点。
In this paper, a DC motor speed control system based on fuzzy controller theory is introduced.
本文主要介绍了以模糊控制理论为基础的直流电机调速模糊控制系统。
The controller of the DC motor speed adjusting system is developed, which is based on ITAE optimum control theory combined with PI control.
提出了一种用于直流电机调速系统的控制器设计方法，该方法主要基于ITAE最优控制理论，并结合PI控制。
The digital PWM speed controller based on the DC motor PWM speed regulating theory and using a 16 bit microcomputer 80C196KB/KC as the central control chip, was presented.
介绍了以十六位单片机80C196KB/KC作为中心控制芯片，结合直流电机PWM调速原理制成的数字直流PWM调速控制器。
The motor speed driving system USES DSP as controller and USES high-frequency delay-loop current comparator composed of integrated circuit.
设计了以DSP为控制器、集成电路构成高速滞环电流比较器的电机调速系统。
The fuzzy logic controller designed in this study determines the required angular used in the DC chopper control based on motor speed error and its change.
设计的模糊控制器以电机的转速偏差及转速偏差率为输入，输出量用于控制斩波调速时的导通角。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
通过设计一种模糊pid控制器，应用模糊算法在线自动整定PID参数的方法，将其应用于无刷直流电动机调速控制系统。
The system is a experiment , so use more micro-sensors about asynchronous motor, Programmable Logic Controller PLC, D/A transducer and variable frequency and speed adjusting.
该系统是一个实验型的设计，所以主要运用的元件是异步电动机、可编程控制器PLC、D/A转换器和变频器等微型 元件。
The SRM controller designed in this paper has many advantages such as rapid response speed, real-time regulation and so on. So it can also be used in the high-speed motor.
本文设计的磁阻电机控制器响应速度快，具有实时调节的优点，因此也适合应用于高速电机。
The experience of designing the serial communication program between PC and 89c51 micro-controller for the speed control of large DC motor is introduced by some examples.
通过实例，介绍为大型直流电机调速系统开发PC机与89c51芯片之间串行数据通信的经验。
The brushless motor controller with great current can restrict maximum speed at will in the rated range of rotation speeds of motors.
在电机的额转速范围可以任意限制最大速度。
The Fuzzy Controller is used in the system, so Motor can be controlled to run at the certain point according to the user's setting of the speed, torque or power by the system, quickly and precisely.
系统采用模糊控制器控制电机，能根据用户需要，快速、精确地调节电机至某一个工作点；
The paper presents two kinds of algorithms for two kinds of controller structure and the paper gives the result of experiment on DC motor speed control system.
文中分两种情况给出了两种控制器结构及相应的算法，最后示出了在调速系统上的实验结果。
Based on a well designed speed curve of tubes, the speed curve of individual rollers can be generated as a reference signal to the corresponding motor controller.
根据事先规划好的钢管期望速度曲线，得出在不同时刻每个辊的各自速度曲线。
The controller can control many step-motor systems in the meantime, and made motor run in multi-curve including speed-up, speed-down, orientation and direction's change.
该控制器可同时控制多台步进电机按曲线方式运行，包括加减速、定位及换向功能等。
The controller can control many step-motor systems in the meantime, and made motor run in multi-curve including speed-up, speed-down, orientation and direction's change.
该控制器可同时控制多台步进电机按曲线方式运行，包括加减速、定位及换向功能等。
应用推荐