Roses, fruit trees and ground cover type plants may be susceptible to dampness-related problems like mold and diseases.
玫瑰,果树和地面覆盖类型的植物可能受到潮湿,模具等相关疾病的问题。
As for the design method of front cover mold, there are some quite novel design ideas.
在这副前盖模具设计方法上,有一些比较新颖的设计想法。
The design and manufacture method of spring pressed cover injection mold are introduced, and the working process of this mold is stated.
介绍了弹簧压盖注射模具的设计与制造方法,并阐述了该模具的工作过程。
The small formation holes in the brush cover was constructed with the mold core in moving and static container, and center ingate was employed to the gating system.
针对电刷端盖压铸件结构及工艺要求,选择端盖口部大端面为动静模分型面,铸件上各成形小孔由动静模型芯对接组成,浇注系统采用中心浇道。
In this paper, analyzed the structural characteristics of the mineral water bucket cover and production requirements, developed a highly efficient and reliable injection mold.
分析了矿泉水水桶盖的结构特点及要求,研制了一种高效、可靠的水桶盖模具。
This design elaborated the manufacture "the axis seals the end cover" compound mold design.
本设计阐述了制造“轴封端盖”的复合模的设计。
Slanting gate cover is used, and the injection process conditions of this mold are introduced in details.
使用了倾斜浇口套,详细介绍了该模具的注射工艺条件。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
对透明塑料罩壳注射模结构,采用点浇口进料。
The structure and process requirements of rubber cushion cover parts are analyzed, as well as the structural character and working process of rubber cushion cover injection mold are introduced.
分析了橡胶缓冲套零件的结构及工艺要求,介绍了橡胶缓冲套注射模的结构特点及工作过程。
The utility model discloses a new shaping machine for various sandwich foods, comprising a cover plate, an upper mold, a middle mold, a lower mold, etc.
本实用新型公开了一种新的多种食品夹心成型器,由盖板、上模块、中模块、下模块等部件组成。
When the machine is running strictly prohibit any part of the body goes into which the emergency door the protection cover and the mold emptier can reach.
机器运行时,严禁将人体任何部位置于安全门和防护罩范围内以及脱模机构伸出所及范围内。
The design thinking of multi-cavity mold for the rubber dust cover, taking off and working process are introduced.
介绍了橡胶防尘罩多腔模具设计思路、产品取出及操作过程。
Over the process analysis to insulated breadth-restricted cover, mold structure of plastic parts is defined.
通过对限幅绝缘盖板的工艺分析,确定了塑件的模具结构。
The structure and injection technology of motorbike behind light cover were introduced. The injection mold structure and working process of motorbike behind light cover were stated.
介绍了摩托车尾灯罩的结构和注射工艺,阐述了生产摩托车尾灯罩的注射模结构与工作过程。
This mold design's topic is the shaver cover, according to the related shaver cover, I did associated process design and die design.
本模具设计的课题是剃须刀后盖,针对其进行了相关的工艺设计和模具设计。
The structure design and working process of injection mold for the mobile phone outer cover were introduced. The design method of the special slide block was stated in detail.
介绍了手机外壳模具的结构设计及工作过程,重点叙述了特殊滑块结构的设计方法。
This paper discussed the design of plastic injection mould of the upper cover of the cable set mold. , and the process analysis of the parts' structures.
本设计进行了一款拉线盘的注塑模设计,对零件结构进行了工艺分析。
This paper discussed the design of plastic injection mould of the upper cover of the cable set mold. , and the process analysis of the parts' structures.
本设计进行了一款拉线盘的注塑模设计,对零件结构进行了工艺分析。
应用推荐