Figure 2 illustrates this in the linkage between the logical data model and the service analysis model.
从图2中逻辑数据模型与服务分析模型之间的连线可以看出这一点。
RequisitePro keeps track of the linkage between model or code artifacts and requirements.
RequisitePro记录了模型或代码工件与需求之间的连接。
As with most of the other alternatives, generating code from WSDL using JAXB 2.x creates both a set of linkage classes and a set of data model classes.
和大多数其他替代选择一样,使用JAXB 2 .x从wsdl中生成的代码创建了一组链接(linkage)类和一组数据模型类。
After a brief introduction of the two-phase excitation scheme, the flux linkage model of a SRM under two-phase excitation is developed using FEA.
文中首先简要介绍了这种两相励磁系统的结构,然后提出了两相励磁下SRM的磁链模型。
On this basis, it emphasized how to establish the node basic information database and the restricting relation database, and constructed out the mathematic model of the planar linkage mechanism.
在此基础上,着重阐述了如何建立结点基本信息数据库和约束关系数据库,从而构造出平面连杆机构的数学模型。
In the field of mechanics, linkage mechanism can be seen as the original structure model theoretically of all other basic mechanisms.
在机械学领域,连杆机构可视为其它基本机构的理论结构原型。
The paper USES this financial linkage model to discern and evaluate the financial risks of the project and makes corresponding risk precautionary measures.
同时利用此财务联动模型对项目的财务风险进行识别与评价,由此制定了相应的风险防范措施。
This paper analogy the selection of voltage space vector and the flux linkage estimate model of the direct torque control system of PMSM, and the realizing project of the system.
文章分析了永磁同步电机直接转矩控制系统的电压空间矢量选择和磁链估计模型,并提出了系统的实现方案。
Current model is the key part in the rotor flux linkage oriented control system, and its discretization analysis is conducted.
电流模型是转子磁链定向控制的关键,这里对其进行了离散化分析。
The model of graphics arrangement structure of the planar linkage mechanism is presentedaccording to the viewpoint of Object-Oriented.
其次是从面向对象的观点出发,提出了平面连杆机构图形层次结构模型。
This paper introduced a bond graph method for the dynamical static force analysis of planar elastic linkage, and presented a bond graph model of this linkage.
本文介绍了平面弹性连杆机构动态静力分析的键合图法。给出了平面弹性连杆机构的键合图模型。
A novel model of snake-like robot based on a spatial linkage mechanism is presented.
提出了一种基于空间连杆机构的蛇形机器人模型。
Chapter two is the foundation of full paper, and it constructs a model about the joint distribution of the genotype on two linkage loci of any relative pair with some genetic relation.
本文的第二章是全文的基础,第二章给出了考虑两连锁基因座位时,任一具有遗传关系的亲属对(诸如父子、同胞、祖孙等)基因型的联合分布模型。
In soil-plant system, linear root water uptake model is a linkage between soil and plant.
在土壤-作物系统中,根系吸水模型是连接土壤和作物的桥梁,然而又是最难处理的一个环节。
Hence, the three-dimensional model of a linkage mechanism is established.
建立了连杆机构的三维映射模型。
The mathematical model of the precision drill unit with parallelogram linkage was brought up and its dynamic behaviors were analyzed with this mathematical model.
本文提出了具有平行四连杆仿形机构的精密播种单体的数学模型,并使用该数学模型对精密播种单体作了动力学分析。
On the basis of the peasants acceptable types and scales we have established the model and method of agriculture extension of linkage-radiation.
在推广试验的基础上,根据农民的接受类型及比例,创立了“连锁辐射农业推广的模式及方法。”
U-I flux linkage model can be set exactly at low speed for considering the effects of temperature to stator resistance.
由于考虑了温度对定子电阻阻值的影响,提高了u-i模型在低速运行时磁链观测的准确度。
The electrical drive system performance was improved using a model of the direct-axis magnetizing flux linkage space-phasor to develop a vector control scheme for the 12-phase synchronous motor.
为了提高舰船综合电力推进系统的性能,推导了十二相同步电动机直轴气隙磁链观测器的模型,籍此构建了十二相同步电动机矢量控制方案。
The general procedure to model planar linkage in non-inertial coordinate system by bond graphs is provided.
给出非惯性系平面连杆机构键合图模型的建立方法。
According to the generative mathematics model of bar linkage curve, the bar linkage curve pattern is established.
根据连杆曲线生成的数学模型,建立了连杆曲线图谱库。
The dynamic model of the linkage is established by Kane's methods. The approximate model of the linkage with all angular rotation of the links being small is developed using Lagrange's equation.
用凯恩方法建立连杆机构动力学模型,当连杆转动角均为微量时采用拉格朗日方程得到连杆机构近似模型。
Optimization of two geared-linkage mechanism design is discussed. Mathematical model and calculating example are given.
本文阐述了两种齿轮连杆机构的优化设计,给出了最优化数学模型和算例。
Firstly, the links of the plane five-bar linkage mechanism is simulated by beam element, the mass matrix, stiffness matrix of linkage mechanism and elastic dynamic model of system are established.
首先对弹性五杆机构进行有限元分析,通过机构梁单元节点位移间的关系,建立起弹性五杆机构单元质量矩阵与刚度矩阵以及弹性动力学模型。
Through the analysis of the working process of this linkage system, this paper execute the dynamic simulation and optimization of this model by using multi-body system dynamics software ADAMS.
通过对肘杆系统工作过程的分析并利用多体系统动力学软件( ADAMS)对模型进行了动力学模拟和优化设计。
The precision analysis and synthesis of cam-linkage mechanisms was studied, a unified precision analysis stochastic model of CAM mechanisms was developed.
对凸轮机构和凸轮连杆机构的精度分析与综合进行了系统的研究。
Analog mechanism model include four bar linkage, crank and sliders mechanism, speed returning mechanism, perpendicular mechanism.
模拟的机构模型有四杆机构、曲柄滑块机构、速返机构、垂线机构等。
By the linkage between the seepage coefficient, porosity and stress, the hybrid analysis model for coupled seepage and stress field in rock mass of equivalent continuum is established.
以渗透系数、孔隙率和应力的关系作为桥梁,当渗流场为非稳定渗流时,建立等效连续岩体渗流的耦合模型。
The utility model provides a dress smooth machine device which is composed of a motor rotary shaft, a coupling and a linkage keystroke.
修光机装置是由电机转轴、联轴器、联接键所组成。
The utility model provides a dress smooth machine device which is composed of a motor rotary shaft, a coupling and a linkage keystroke.
修光机装置是由电机转轴、联轴器、联接键所组成。
应用推荐