The location model calibration experimental results are analyzed from the perspective of error.
从定位误差的角度对标定的定位模型进行了试验分析。
Quantitative Modeling of Project Dynamics, Model Calibration and Parameter Estimation, Simulation Execution, Industrial Examples.
数值模拟项目动态，模型校验和参数估算，模拟执行，产业例子。
Finally, three methods have been proposed for model calibration, namely, index comparison, parameter comparison and curve fitting.
最后，提出了三种方法对模型进行校验，分别是指标对比法、参数对比法、曲线拟合法。
Quantitative Modeling of Project Dynamics, Model Calibration and Parameter Estimation, Simulation Execution, Industrial Examples ( PDF) ( PDF)
数值模拟项目动态，模型校验和参数估算，模拟执行，产业例子。
The new equation should be distinguished from the traditional one unless the coefficients in them are obtained by field tests in the fields or model calibration.
如果方程中的系数通过野外试验或模型识别来确定，则对传统假定下的水平面轴对称位移方程与所给出的新方程就没有必要进行区分。
In this paper, we introduce the camera model calibration algorithms and adopt a method of moving a single camera to calibrate parameters of traffic monitoring system.
本文研究了摄像机模型的标定方法，采用了通过一台摄像机平行移动来模拟两个摄像机的标定方法，达到标定系统参数的目的。
The results of model calibration and verification show that the model can reasonably respond to the changes of forcing functions for drawing quantity and temperature of water.
模型校准和检验结果表明，对于系统给定的强制函数(引水量和水温等)的改变，模型作出的状态变量的描述是合理的。
The main requirements for cm operational conceptual hydrologic model are function development, model calibration, and validation followed by production of forecast runs and analysis of results.
功能改进，模型率定，模型预报的验证以及其结果分析是应用概念水文模型所需要的几个主要部分。
The results indicate that the design of the model is correct, the test equipment is reasonable, the tidal control is advanced, the date collection is dependable and the model calibration is critical.
试验结果表明：模型设计正确，试验装置合理，潮汐控制先进，数据采集可靠，模型率定关键。
Therefore, the simulation model after calibration can meet the demands of evaluation and management.
因此，校正后的模型可以满足评价和管理的要求。
So cost calibration to estimate model this text do work, have practical value very much as to software development enterprise.
因此，文章所做的成本估算模型的校准工作，对软件开发企业非常具有实用价值。
Then we show the calibration model which is designed by us and finally give out our result of calibration.
然后给出了在我们系统中应用的自行设计的标定模板，最后以表格的形式给出了结果数据。
As an example of large sized structural component, the mechanical model of load calibration test of an airplane wing was analysed.
以飞机机翼等大型结构为例，探讨了大型结构部件载荷标定试验的力学模型。
While numerical modelling of surface travelling wave absorption performance was feasible, without experimental data, calibration of any such simulation model was not possible.
即便没有试验数据，表面行波吸收性能的数值也是可以模拟的，但是不能校准这些模拟数值。
The Build lens node can be used to construct a lens model from multiple images of a calibration grid, such as a checker-board pattern, taken at different camera focal lengths.
构建透镜节点可以用来构造一个透镜模型从多个图像的校准网格，如棋盘式格局，取不同的相机焦距。
A simple calibration model was developed for digital fringe projection profilometry(DFPP) based on absolute phase extraction and space mapping techniques to simplify the measuring system.
建立了数字光栅投影轮廓测量系统的简易标定模型，以实现测量系统的简便化和便携式应用。
After establishing the model for the calibration of a novel five-axis parallel machine tool, the process of calibration is simulated by minimizing inverse kinematic residuals.
建立标定模型，用逆向运动学标定方式模拟了一新型五轴并联机床的标定过程，结果表明这种标定方法的算法收敛快、鲁棒性好。
This model could be used for the calibration of lung counter with Monte Carlo method.
此体素模型和蒙特卡罗方法结合可用于校准肺部计数器。
In the research, based on BP neural network theory, a printer calibration model is provided according to sorting experiment data by hue Angle range.
在研究中，利用BP神经网络理论，提出并建立了按色相角范围对实验数据分类的打印机标定模型。
The accuracy, reliability, and application scope of NIR method are depended on the calibration model developed by the database based on routine analytical methods.
由于该技术测定的准确性、可靠性、适用范围等都依赖于以常规测定方法为基础建立起来的校正分析模型。
The application of nonlinear error in measure model in the calibration of camera is further improved on the base of other researcher.
在前人工作的基础上，进一步完善了非线性度量误差模型在摄像机定标的应用。
Experiments concerning the verification of the mathematical model, calibration of the sensing and measuring system, and field applications are carried out on the basis of the prototype.
在研制出样机的基础上，对数学模型的验证，起重传感器测量系统的标定，以及现场测试等方面进行了全面系统的实验研究。
This paper presents a new model that laser projector and CCDs are detached and calibration method is introduced.
将激光器与CCD摄像机分离，并给出了标定方法。
The distortion model in process of camera calibration is analyzed, and the distortion is decomposed to the radial and tangential distortion.
并对摄像机参数标定过程中的畸变模型进行分析，主要分析了透镜的径向和切向畸变分量。
Analyzing flour protein quality, the calibration model is the best when the wavelength number receives 7.
对于面粉蛋白质的定标，波长数达到7时，回归的模型较好。
The next topic is camera calibration and we give an ordinary way to calibrate and two calibration method of using one model plane.
首先介绍摄像机的透视投影模型，并讲述了普通摄像机标定的方法和两种平面模板的标定方法。
Through parameter calibration and model validation, model can be adapted to morphogenesis and LAI simulation for different varieties and management practice.
通过对模型参数的校正和核实，使模型适应于不同类型品种的形态发生和LAI动态模拟。
Observability of the calibration model is analyzed and applicable conditions of the technology are derived.
分析了标定模型的可观性，得出了该技术的适用条件。
Observability of the calibration model is analyzed and applicable conditions of the technology are derived.
分析了标定模型的可观性，得出了该技术的适用条件。
应用推荐