The HPM Series is a group of CMOS, microprocessor-based control units designed to monitor and control gas delivery manifolds.
HPM系列是一组CMOS,采用微型处理器控制装置,设计用于检测和控制天然气运输通道。
The microprocessor-based control methods and flowchart of Carrier 19XR centrifugal water chiller are described. It can be a reference to equipment operation and maintenance people.
以开利公司最新的19XR机组为例,介绍离心冷水机组基于微处理器的自动控制方案及流程。供使用维护人员参考。
This paper deals with the theoretical and experimental investigation concerning the improvement of NC machine tool contouring accuracy by means of microprocessor-based control scheme.
本文提出了采用微处理机控制,提高NC机床成形精度的理论模型与实现方案。
The microprocessor based automatic control methods and flowchart of air cooled screw chiller are described as per York updated products.
以约克公司最新的机组为例,介绍风冷螺杆式冷水机组基于微处理器的自动控制方案及流程。
Constructed a control system of the electric stove with constant flow based on EPEC 3g microprocessor for the electric stove in the electromagnetic roll-casting system.
针对电磁铸轧系统中的电加热炉,采用了EPEC3g系列微处理器建立了电加热炉恒流量控制系统。
The paper is based on research and development of locomotive logic control unit and locomotive distributed microprocessor control system, which are subsystems of locomotive control system.
论文是基于机车控制系统的子系统“机车逻辑控制单元”和“机车分布式微机控制柜”的开发研究展开的。
Based on the implementation of digital control of each DFC mode with microprocessor, this paper presents a scheme for multimode synthesis and conversion between each other.
本文在微处理机单独实现各模态控制功能基础上,对各模态功能进行综合,指出模态转换的实现技术。
The hardware is based on the Samsung's ARM microprocessor. A CPLD chip is used to control the interface of the network and IDE.
网络刻录系统的嵌入式处理器选择了三星的ARM处理器,并使用CPLD芯片来控制网络和IDE等接口。
The microprocessor based control provides intelligence to gather and process information about system defrost requirements.
微机控制,智能收集和处理系统除霜信息。
The distributed control technology is used in this system and every node is based on embedded microprocessor.
群控系统采用分布式控制,各节点以嵌入式微控制器为核心,实现电梯群控系统的硬件系统。
This paper presents a double-neuron predictive governor based on 8098 microprocessor including its control algorithm and operational principle of electric part and hydraulic part.
本文介绍了一种基于8098的双神经元预测调速器,包括它的控制算法以及电气部分和液压部分的工作原理。
This instrument based on LPC932 as the key microprocessor to gather , deal with and store data, to control real-time clock, to complete the liquid crystal display and communication.
该仪器基于LPC932单片微机为核心微处理器,来完成数据采集、处理,存储,实时时钟控制,液晶显示,通信等功能。
Our products include multifunctional fittings such as gas air ratio control systems, and thermal management based on microprocessor - controlled automatic burner controls.
我们的产品包括多功能装置如空燃比调节系统和基于微处理器控制的自动燃烧器的热量管理。
The topic discussed in this article is how to organize a microprocessor based system which is intended to implement the automatic computation of shooting track and then to control the fire system.
本文探讨的问题是如何以微处理机为核心设计一个微型机系统来实现坦克火控系统弹道计算机的综合控制功能。
The system discussed in this paper is to control the triggering of silicon controlled rectifier, based on chip microprocessor 8031 of series MCS51, together with some exterior devices.
本系统采用MCS-51系列8031单片机为基础结合外围器来实现对可控硅变流器的触发控制。
A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.
针对磁放大器式电源埋弧自动焊机设计了单片机控制系统。
On the hardware, this system used S3C2410 which based on ARM920T as the core microprocessor, in order to realize the function of data processing, control touch screen's movement.
本系统在硬件上采用基于ARM920T内核的处理器S3C2410作为核心处理器,以实现后端数据处理,并控制触摸屏的相关动作。
A duplicate microprocessor - based governor for dual control turbine is presented here.
本文主要论述了双微机双调节调速器软件的研究。
This time the signal generator and more software-based, is essentially a microprocessor on the DAC program control, you can get all kinds of simple wave.
这时期的信号发生器多以软件为主,实质是采用微处理器对DAC的程序控制,就可以得到各种简单的波形。
The overall design plan for NC improvement on common lathe based on chip microprocessor control, the design of improvement on parts of lathe machinery and CNC system were discussed.
主要阐述了基于单片机控制的普通车床数控化改造总体设计方案、车床机械部分改造设计、微机数控系统设计等内容,为企业进行数控化技术改造提供了一种途径。
This paper analyzes the main factor of affecting the measurement in high resistance measurement with V/I method, designs a high resistance measurement instrument based on microprocessor control.
本文分析了影响V/I法高阻测量精度的主要因素,设计了以单片机为核心的高阻测量仪。
A microprocessor control based dyeing process control system which hasvbeen used in High Temperature and High pressure Dye-Machine is discussed in this paper.
高温高压染色机微机控制系统是一个实时控制系统。
The treating apparatus has microprocessor to control the pressure modules based on sensor signals and inflates and deflates the air bags according to the set program.
治疗枕装置由微处理器根据传感器信号控制压力模块,按设定程序对各气囊充或放气。
Problems that need to be resolved for a single CPU digital controller system are analyzed. Based on a 8-bit microprocessor the principle of digital generation of the control command is illustrated.
提出了用单一CPU系统组成数字化器需要解决的问题,并以8位微机为例,阐述了指令数字化形成原理。
Based on ARM microprocessor, LINUX and MCU, lighting control console with DMX512 protocol is presented in the paper.
本文提出了采用ARM、LINUX和单片机共同构成了先进的基于DMX512协议的调光台。
The underwater control system based on C8051F020 microprocessor as the system core, controls the sensors in real-time sampling, and the data's storage and upload.
极地海洋环境监测系统分为水下控制系统、水下传感器组与基站控制系统。
Microprocessor-based governor is an important device in the hydraulic turbine control system. Recent years, the PLC technology has been widely applied in the field.
水轮机微机调速器是水轮机控制系统中的重要设备,近几年PLC在此领域得到广泛的应用。
Microprocessor-based governor is an important device in the hydraulic turbine control system. Recent years, the PLC technology has been widely applied in the field.
水轮机微机调速器是水轮机控制系统中的重要设备,近几年PLC在此领域得到广泛的应用。
应用推荐