Nonhalogenated. 7.0 MFR, for thicker sections without sinks.
非卤化。7.0熔体流动,为较厚的路段没有汇。
Incorporator Changes , Items, Mfr Parts, Manufacturers, Prices.
组件工程师项目,制造商,制造商零件。
The size of the connecting flange on drum will be provided by pump MFR.
连接法兰上鼓的大小,将提供泵的MFR。
The experiments were mainly carried out in the mixed flow reactor (MFR).
实验工作主要在无梯度反应器中进行。
In charge of sampling and intermediate product's analysis, such as powder's MFR, etc.
负责取样和某些特定中间产品的分析,例如粉末的溶流比例的分析。
Quatative relation formula is set up and MFR-component relation graph of PE mixture is also drafted.
建立了定量关系式,并绘制了PE混合体系的MFR与组成关系图。
MFR did not take the models too literally and was one of the few firms to have been appropriately pessimistic.
MFR没有照本宣科地运用这些模型,它是少数已经适当悲观的企业之一。
The results showed that in the same MFR, CR-PP has higher impact strength and HM-PP has higher elongation.
研究结果表明:相同熔体流动速率的CR - PP与氢调法pp比较,CR - PP的冲击强度高,氢调法pp的断裂伸长率高。
The result of MFR showed that the compounded fire-retardant with 40 PHR could meet the needs of processing craftwork.
熔体流动速率(MFR)的测定表明当复合阻燃剂的添加量为40份时,仍能满足加工工艺的要求。
PP indicates the amount of irregular vibration of vocal folds and I/F represents efficient transition from MFR to acoustic energy.
频率微扰商是表示连续元音发声时声带振动相邻周期间的微细变动量; 发声效率反映平均气流率与声能的有效转换率。
The results showed that the swelling range of parison diameter of pp blended with higher MFR PE is wider and its parison sag is more apparent.
结果表明,聚丙烯与较高熔体流动速率的聚乙烯共混后,其型坯直径膨胀的变化范围较宽,垂伸较明显。
The influences of different initiators and their concentrations on grafting ratio and the melt flow rate (MFR ) of the grafted polymer were studied.
研究了引发剂种类及用量对接枝率和接枝物熔体流动速率(MFR)的影响。
The results show that: the kind of PE influences the graft rate and MFR of the product directly, the sequence of grafting ability is LDPE>LLDPE>HDPE;
实验结果表明:产物的接枝率和熔体流动速率(MFR)变化与聚乙烯的种类有直接关系,接枝性能从优到差的顺序为: LDPE> LLDPE> HDPE;
The model can count the important index of production, such as slurry concentration in the reactor, solid contents of products, catalyst residual and MFR.
本模型可以准确地计算CSTR反应器的浆液浓度、产物固含率、催化剂残留率、熔融指数等重要的生产指标。
There are several models for the problem: Minimum Fragment Removal (MFR) problem, Minimum SNP Removal (MSR) problem, and Minimum Error Correction (MEC) problem.
这个问题有几个不同的模型最少片段去除(MFR)问题,最少SNP去除(MSR)问题以及最少错误纠正(MEC)问题。
The effects of the agent system on the modification were investigated by testing melt-strength, melt viscosity, the changes of melt flow rate (MFR) and gel content.
通过熔体强度、熔体黏度测试和熔体流动速率(MFR)、凝胶含量的变化研究了试剂体系对接枝交联改性的作用。
Change Analyst changes, items, Manufactures, Mfr. Parts, File Folders Create items and changes, and mange the routing and release process of changes through workflows.
变更分析变更,项目,制造商,制造商零件,文件夹,创建项目和更改,使用工作流管理流程和发布过程。
Even though MFR values are measured at an unrealistically low shear rate, it might seem that the test would accurately rank different materials for comparative ease of flow.
尽管MF R值是在低剪切速率下测定,与事实不符,但是可以从中准确地区分出不同相对流动性的好坏。
Even though MFR values are measured at an unrealistically low shear rate, it might seem that the test would accurately rank different materials for comparative ease of flow.
尽管MF R值是在低剪切速率下测定,与事实不符,但是可以从中准确地区分出不同材料相对流动性的好坏。
The results show that the elastomeric MMA copolymer R, which is partially compatible with PC, is a very efficient toughening agent and improves the melting flow rate(MFR) for PC.
它是PC非常有效的增韧剂,同时,可以改善PC的加工流动性,二者共混可望开发出有重要实际意义的塑料合金。
The results show that the tensile strength, breaking elongation, impact strength and MFR of nylon 6 increase simultaneously after some PAMAM were added. The optimum increment is 1.0%.
结果发现,在尼龙6中添加pamam后,尼龙6的拉伸强度、断裂伸长率、缺口冲击强度及熔体流动速率均有所提高,PAMAM添加量为1.0%时效果最佳。
It is pointed out that the testing conditions of plastics properties should near the production and application conditions as far as possible by taking melt flow rate (MFR) for an example.
以熔体流动速率为例,阐述塑料性能测试条件应尽量接近生产和使用条件。
By testing the MFR of silane grafted PE with different preservation time, and the surface condition and the gel content of the silane grafted extrudates with different retention time in extruder.
测试不同储存时间下的硅烷接枝聚乙烯的熔体流动速率和硅烷交联聚乙烯电缆料在挤出机中停留不同时间后挤出物的表面状况、凝胶含量等。
OBJECTIVE: to observe the protection of the effective fraction of Hibiscus Mutabilis L. (MFR) on renal ischemic reperfusion injury in rats to probe into the mechanism of MFR on anti inflammation.
目的:观察木芙蓉叶有效组分(MFR)对大鼠肾缺血再灌注损伤中的保护作用,探讨MFR的抗炎作用机制。
The quoted MFR value is the weight of polymer melt flowing through an orifice in specified conditions, so the higher the MFR value, the lower the melt viscosity and the easier the material will flow.
MF R采用的数值是在一定的条件下通过口模的聚合物熔体的重量,所以MF R越大,熔体粘度越低,而材料的流动性就越好。
The quoted MFR value is the weight of polymer melt flowing through an orifice in specified conditions, so the higher the MFR value, the lower the melt viscosity and the easier the material will flow.
MF R采用的数值是在一定的条件下通过口模的聚合物熔体的重量,所以MF R越大,熔体粘度越低,而材料的流动性就越好。
应用推荐