• Gas metal arc welding (GMAW) is the main welding method in welding production.

    熔化气体保护(GMAW)焊接生产常用的焊接方法之一。

    youdao

  • Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.

    焊条弧焊焊缝断裂韧性气体保护焊焊缝断裂韧性相当。

    youdao

  • Shielded Metal Arc Welding, Submerged-arc Welding and CO2 Arc Welding are recommended for base layer welding.

    基层焊接推荐采用手工电弧焊、埋弧焊以及二氧化碳气体保护

    youdao

  • This study established a comprehensive approach to monitor erythemal UVR magnitude from Shield Metal Arc Welding processing.

    研究建立完整的评估方法监测遮蔽金属电弧焊接产生的红斑紫外线强度。

    youdao

  • The behaviors of desulphidation during manual metal arc welding have been studied by means of experimental and theoretical analysis.

    通过试验理论分析研究了手弧焊熔渣冶金脱硫行为

    youdao

  • Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.

    应用高效气体保护熔化电弧焊焊接铝合金薄板时,容易出现穿焊接缺陷

    youdao

  • Based on the through the arc sensing method, a method is put forward to recognize the disturbance information of gas metal arc welding (GMAW).

    基于电弧传感检测方法提出了识别GMAW焊接过程干扰信息的方法。

    youdao

  • The mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.

    东方电机股份有限公司首次采用混合气体熔化极气体保护焊接水轮机转轮,并且出口叙利亚迪什林水轮机中应用。

    youdao

  • Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.

    前言:采用焊条弧焊工艺方法,选用C HR322堆焊焊条Q235基体不同焊接电流进行了堆焊试验

    youdao

  • The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.

    双丝共熔池气体保护TCGMAW)的熔滴过渡对焊缝成形以及焊接质量具有重要影响

    youdao

  • Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper.

    介绍采用不锈钢药芯焊丝CO2气体保护焊接不锈钢储罐工艺过程

    youdao

  • Surfacing process is conducted on the substrate of steel A3 by shielded metal arc welding process using electrode CHR322 under different welding current conditions.

    采用堆焊焊条CHR322A 3基体上以不同焊接工艺进行手工电弧堆焊试验。

    youdao

  • English Name:Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification;

    简体中文标题:焊接材料。带不带气体保护合金钢以及晶粒电弧焊管状焊条分类

    youdao

  • All carbon arc gouged surface areas shall be ground to clean bright metal prior to subsequent welding.

    开始后续焊接所有区域应接地洁净明亮的金属

    youdao

  • English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.

    简体中文标题:焊接相关工艺接缝制备建议手动金属电弧焊气体保护金属电弧焊、气焊、TIG焊接和

    youdao

  • This welding process joints work pieces by melting the electrode and the base metal with the heat from the electric arc between the electrode and the work piece.

    是一种利用焊条工件之间电弧产生热量熔化焊条母材焊工连接起来的焊接方法

    youdao

  • Gaseous helium is used as an inert shielding gas in metal arc and laser welding.

    金属电弧激光焊接中气态用作惰性屏蔽气体

    youdao

  • To reveal the influence of forced convection on gas shielded arc welding temperature field, the infrared camera was used to investigate the temperature field of the base metal in CO2 arc welding.

    为了研究强制对流气体保护温度影响通过红外热像检测了CO2气体保护的温度场,发现熔池及其邻近区域温度呈圆锥型分布。

    youdao

  • Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.

    短路过渡焊接时,熔滴过渡频率通常作为评价焊接过程稳定性及焊接质量的重要指标

    youdao

  • Pulse current, arc polarity, arc voltage and metal transfer of variable polarity pulse MIG welding are controlled by 80c196kc coordinately to implement the stable welding procedure.

    单片机协调控制极性脉冲MIG脉冲电流电弧极性、电弧电压熔滴过渡频率,实现稳定焊接过程。

    youdao

  • This is the submerged arc welding, a commonly used welding method that can in an hour deposit weld metal equal in weight to that of the operator himself.

    弧焊常用焊接方法小时内金属可以等于操作者本身的重量

    youdao

  • The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.

    研制的ZX5800D电源进行钨极弧焊、手工电弧焊弧气刨弧焊时均获得满意的性能

    youdao

  • In 1966, Beijing metal structure factory developed by rotating sphere of the submerged arc welding automatic welding.

    1966年,北京金属构造开辟出了使球体扭转主动焊。

    youdao

  • In basis of analyzing the features of the conventional arc welding technology, a DC low-frequency plasma welding power with fusion penetration is selected as the heat source for metal forming.

    本课题分析常规弧焊技术特点基础上选取低频直流等离子弧焊电源作为成形热源

    youdao

  • Direct metal forming based on arc welding is a novel economical rapid prototyping process.

    基于弧焊直接金属成形一种新型低成本快速成形技术。

    youdao

  • Direct metal forming based on plasma arc welding is a novel rapid prototyping process.

    基于等离子弧焊直接金属成形方法一种新型快速成形工艺

    youdao

  • Direct metal forming based on plasma arc welding is a novel rapid prototyping process.

    基于等离子弧焊直接金属成形方法一种新型快速成形工艺

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定