These mathematical facts implied by the model unveil an underlying mechanism that may explain couple disruption in real scenarios.
这些数学事实表明,这一数学模型揭示了可以解释真实情景中配偶关系破裂的基本机制。
Aim at the problem, this paper establishes the mathematical model of multipurpose optimization to made hoisting mechanism to occupy minimum space and planet gear to use minimum material.
针对这一问题,建立了以起升机构占用空间最小和行星齿轮减速机构用材最少为目标的多目标最优化数学模型。
The primary coverage as follows:Firstly, according to the running features of the globoidal indexing cam mechanism establishes mathematical model, then builds overall design.
主要内容如下:首先根据弧面分度凸轮机构的运行特点建立数学模型,并进行总体设计。
This mathematical model improves the design speed and quality of loader connecting rod mechanism has general applicability to the optimization design of RSCPM.
提高了装载机连杆机构的设计速度和设计质量,这种数学模型对于反转六连杆机构的优化设计具有普遍的适应性。
The mathematical model for the motion inverse seeking of paper separation mechanism was constructed, and the motion laws of CAM follower and of paper separation suction nozzle were obtained.
构建了分纸机构运动反求的数学模型,得到了从动件及分纸吸嘴的运动规律。
This paper introduces the features, mechanism, mathematical model, dynamic equations of the classic chemical oscillation and some applications in chemistry and biology.
本文介绍了典型振荡反应的特点、机理、数学模型、动力学方程序及在化学和生物学中的某些应用。
On the basis of forming mechanism symbols, it constructs a mathematical model directly and makes use of the available computer programs to deal with the analysis problems.
这种方法以轮系组成机构符号为基础,直接构造出轮系分析的数学模型,利用现有的计算机程序进行处理。
This paper presents a simplified mathematical model for describing the water block mechanism and its influences, based on Darcy's formula and relative permeability curve and capillary pressure curve.
根据达西公式及相对渗透率曲线和毛管压力曲线的表示式,提出了一个描述水锁机理及其影响因素的简化的数学模型。
By the experiment on quartz sand filter, the effect and mechanism of phenol removal were studied. A related mathematical model was presented and demonstrated by a project case.
结合石英砂滤床模型试验,研究了石英砂滤床的除酚效果与机理,提出了相关数学模型,并通过工程实例进行了验证。
It is difficult to use a precise mathematical model to describe the fault mechanism of transformers. There are many uncertain factors between the phenomena and causes of the faults.
电力变压器故障的机理难以应用准确的数学模型加以描述,故障现象与故障原因之间存在着很多不确定因素。
Dynamic mathematical model of ball mill pulverizing system with storage bunker is obtained by mechanism analysis.
通过机理分析法建立了球磨机中储式制粉系统的动态数学模型。
On the basis of the former study results, the theory and mechanism of semi-analytical interpretation were improved, and a semi-analytical mathematical model for tracer test system was developed.
在总结前人研究成果的基础上,完善了半解析方法的解释理论和机理,建立了示踪剂测试半解析方法体系数学模型。
The optimization design of articulated steering mechanism of the loader is investigated. The mathematical model of optimization design is established.
本文对装载机铰接式转向机构的优化设计问题进行了研究,给出了它的优化设计数学模型。
Purpose: To establish a simple mathematical model for investigating the mechanism of frequency components in cardiovascular variability.
目的:建立心血管变异性的数学模型,探讨变异性频谱的主要频率成分机理。
This paper Analyzes the mechanism and principle of compound pendulous bell-less top distributing installation. and gives the mathematical model of inclined moving and turning.
分析了复合摆动式新型无钟高炉炉顶布料装置的机构组成原理。建立了倾动和转动数学模型。
Sets up a mathematical model of unsteady heat transfer of deep underground structure based on the mechanism of heat transfer.
基于地下厂房的传热机理,建立了深埋地下建筑动态传热的数学模型;
Based on this mechanism, a new mathematical model characterizing the material removal rate in CMP process was developed by using micro-contact mechanics and particle size distribution theory.
基于这种机理,应用微观接触力学和磨粒粒度分布理论建立了一种新的表征CMP过程材料去除速率的数学模型。
It point out that mathematical model has definite meaning to adjusted mechanism of lung compensatory and compensatory strength and so on in studying acid-base balance disturbance.
提示这一数学模型对研究酸碱平衡紊乱时,肺代偿调节机制、代偿强度等情况有一定的意义。
The mathematical model can be used to predict the variations of temperature and mass loss for understanding the mechanism of vacuum cooling.
数学模型可以准确预测真空冷却过程中的温度变化和质量损失,将有助于进一步理解和研究真空冷却机理。
In this paper, basic operating process of numerical control docking mechanism is introduced. Mathematical model in initial capture period is established and simulation example is given.
介绍了数控式对接机构对接的基本操作过程,建立了对接预捕获阶段仿真的数学模型,并给出了仿真实例。
The interaction between operating mechanism and interrupter of a puffer circuit-breaker is regarded as a dynamic control system. Its mathematical model of breaking process is built.
将断路器的操动机构和灭弧室的相互作用视为动态控制系统,建立了断路器开断过程的数学模型;
Describes the mechanism of a fast response solenoid valve, gives the mathematical model of it's optimized design, and optimizes it's structure by computer.
阐述了快速电磁铁实现快速动作的机理,建立了快速电磁铁优化设计的数学模型,并用计算机对其结构进行了最佳化设计。
Mathematical model is constructed in order to explain the physical mechanism of flame temperature detection in boiler using CCD camera directly.
建立了测温数学模型,为直接利用CCD摄像机检测锅炉炉膛燃烧火焰温度阐明了物理机理。
Optimization of two geared-linkage mechanism design is discussed. Mathematical model and calculating example are given.
本文阐述了两种齿轮连杆机构的优化设计,给出了最优化数学模型和算例。
The mathematical model of photothermal mechanism in laser ablation has been proposed and the equation of ablation depth for single laser pulse has also been deduced.
由光热消融机理给出了激光消融的数学模型,并对单脉冲激光消融深度进行了数学推导。
The paper researches designing method of the motion rule-divisible CAM mechanism, makes a detailed analysis of the mathematical equation, and builds the mathematical model of the CAM mechanism.
研究了运动规律分段式凸轮机构设计方法与流程,对凸轮机构运动的数学公式进行了详细的分析和推导,建立了凸轮机构的数学模型。
The mathematical model of the lifting mechanism kinematics of the underground dump truck is established with the plural vector and the feature of the lifting mechanism is analyzed.
采用复数向量法建立了地下运矿车举升机构运动学的数学模型,分析了该举升机构运动的特点。
In this paper the mathematical model of optimal design of the double-gear crank mechanism for generating a function is first established.
本文首次建立了实现函数的双齿轮曲柄机构优化设计的数学模型。
The satisfactory mathematical model of K 8 flap spacing mechanism has been set up by the method provided in this paper, so that the reliability of the mechanism can be calculated.
所采用的建模方法比较完满地解决了K-8机襟翼限位机构(以下简称限位机构)的建模问题,建立了数学模型,以便进行机构的可靠性计算和设计;
The satisfactory mathematical model of K 8 flap spacing mechanism has been set up by the method provided in this paper, so that the reliability of the mechanism can be calculated.
所采用的建模方法比较完满地解决了K-8机襟翼限位机构(以下简称限位机构)的建模问题,建立了数学模型,以便进行机构的可靠性计算和设计;
应用推荐