The paper stated in detail an analytical redundancy fault diagnosis method of automated mechanical transmission (AMT) control system.
详细论述了一个用于机械式自动变速器(AMT)控制系统的解析冗余故障诊断方法。
Method to monitor sterilization effect comprehensively, adopt biological indicator and chemical indicator to control different parameter and mechanical status during the sterilization.
方法采用生物指示剂、化学指示剂和控制灭菌过程的各种参数及机械状况，对灭菌效果进行综合监测。
Objective: to study the control method of a mechanical assistant limb based on brain-computer interface (BCI) and to demonstrate the feasibility of this method.
前言：目的：研究一种基于脑-机接口技术的康复辅助机械手运动的控制方法，并论证其可行性。
The practice proved that, using the appropriate Craft control method, is advantageous in enhancing the Coating quality and the Mechanical property.
实践证明，采用恰当的工艺控制方法，可有利于提高机械镀锌层的质量，提高镀锌层的机械性能。
The forging method with horizontal V-shaped anvils(HVA) was introduced to control fibrous tissue flow direction, to improve the anisotropy of mechanical properties of axial forgings.
应用一种新的锻造工艺——水平V形砧锻造法，通过有效控制锻件的纤维流向，改善了轴类锻件力学性能的异向性。
As contrasted with the raceway control assumption, the new method can be applicable to any speed and is relative reasonable because it is based on mechanical analysis.
与滚道控制理论相比，新的方法能够适用于高、中、低各种转速，由于源于力学分析，因而计算比较合理。
The results show that this method can improve the control and mechanical system design, and provide theoretical bases for robot control and performance improvement.
仿真结果表明，该仿真方法可以有效提高控制系统及机械系统的设计效率，为实现机器人的控制及性能改进提供了理论依据。
Qualitative physical modeling verifies the fact that the forging method with horizontal V-shaped anvil is an effective process to control the mechanical properties of axial forgings.
定性物理模拟实验证明了水平V形砧锻造法是控制轴类锻件力学性能的有效工艺手段。
Based on the mechanical and aerodynamic methods of shock wave control, a method of plasma aerodynamic actuation is proposed.
在机械式和气动式激波控制方法的基础上，提出了激波控制的等离子体气动激励方法。
Illustrating with the teaching method of Mechanical Engineering Control Basis course in mechatronics major, this paper demonstrated system case teaching method which simulates system practice.
机械控制工程基础是机械设计与机械制造类专业的一门必修专业主要基础课。
Studying the test method for mechanical properties of MEMS materials is the key related to solve the MEMS design, manufacturing, quality control and appraisal.
研究微材料机械力学性能的测试方法是解决MEMS设计、制造、质量控制与评价的关键环节。
By introducing the method of yaw moment control to the mechanical steering vehicle, to improve the steering performance of mechanical steering vehicle included.
对机械转向车辆引入横摆力矩控制方法，以改善包括机械转向车辆的转向性能。
Common problems consisting in the slide position control in the current mechanical press are discussed, and the feasibility of using the iterative learning method is analyzed.
讨论了目前机械压力机滑块位置控制中普遍存在的问题，分析了迭代学习方法在压力机滑块位置控制中应用的可行性。
This paper presents a method for modular robot joints that integrate mechanical part and control system.
提出了一种集机械和控制为一体的机器人模块化关节的设计方案。
In the face of control problem of complex mechanical & electronical system, which is of time-varying, strong coupling and uncertainty, any single control method can not achieve famous performance.
在面对时变、强耦合、不确定等特性的复杂机电系统的控制问题时，任何单一的控制方法都不能达到令人满意的控制效果。
The operational principle, control method, and mechanical and electrical devices associated with this technique are all described in the present paper.
本文对结晶器在线调宽技术的机电设备、动作规律及控制方法进行论述比较。
The forging method with horizontal V-shaped anvils (HVA) was introduced to control fibrous tissue flow direction, to improve the anisotropy of mechanical properties of axial forgings.
利用水平V形砧锻造法，通过有效控制锻件的纤维流向，改善轴类锻件力学性能的异向性，实现轴类锻件的等向锻造，创造普通锻造法无法达到的特殊锻造效果。
This article introduces the method of mechanical impedance employed in the non-destructive quality-control of the foundation pile.
本文介绍了机械阻抗法无破损检验桩基础质量。
The advantages of the proposed method are insensitivity to the incident photon direction, large wavelength range without mechanical movement, and real-time control.
该方法具有对激光入射方向不敏感、无需机械转动、使用较宽波长范围、实时可控等优点。
The advantages of the proposed method are insensitivity to the incident photon direction, large wavelength range without mechanical movement, and real-time control.
该方法具有对激光入射方向不敏感、无需机械转动、使用较宽波长范围、实时可控等优点。
应用推荐