One technique to test composite material takes advantage of heat transfer: inspectors place large heaters next to a section of the plane.
测试复合材料的一项技术主要依靠热传递实现：测试员将一个大型加热器放在飞机受测试部分的旁边。
One technique to test composite material takes advantage of heat transfer. Inspectors place large heaters next to a section of the plane.
一种检测复合材料完整性的技术是利用热传导性：检验员在飞机的一个区域放上一个加热器，如果有一些受损的裂缝，就会改变热的传导，这一些改变就会被热敏感摄像头捕捉下来。
The heat storage principle and material of electric heat solid heat storage device is introduced, and heat transfer analysis is made on the heating and discharging.
介绍了电热固体蓄热装置的蓄热原理和蓄热用材料，对加热过程和放热过程进行了传热分析。
The combustion and heat transfer in CFB boiler are related with the bed material, while the bed material is formed during the coal combustion, fragment and attrition processes.
循环流化床锅炉炉内的燃烧及传热与炉内床料的状态密切相关，而炉内床料主要是由燃煤含有的矿物组分经过燃烧、爆裂和磨耗过程形成的。
By applying theory of heat transfer, a melting model of material filament in liquefied pipeline is built and solved by numerical method.
应用传热学理论，建立材料丝在液化管中的熔融模型。采用数值解方法，求出该模型的解。
Thermal conductivity of tube material plays an important role in heat transfer characteristics of ice-on-coil.
冰盘管材料的热导率对其传热性能有重要的影响。
The transverse motion of particle enhances the heat and mass transfer of material in the rotary kiln, and it is important for the optimal design and practical use of the equipment.
回转窑内物料颗粒的横向运动使物料的传热和传质得到加强，其研究对于回转窑的优化设计和运行是十分重要的。
A finite element (fe) method for the prediction of the equivalent heat transfer parameters of the composite material with random multi-scale grains was presented.
针对预测多种尺度颗粒随机分布复合材料等效热传导参数的难点，提出了一种多尺度有限元方法。
The computor resulted that the replacement of checker brick material will change the heat transfer performance.
计算机计算结果表明，格子砖材质的更换会改变蓄热室的换热特性。
The flowing and heat transfer in the primary surface recuperator (PSR) can be influenced by unreasonable inlet structure which results in uneven material flow distribution.
不合理的进气结构造成一次表面回热器(PSR)内部物流分配不均匀，影响回热器内部流体的流动和传热效果。
Effects of the liquid property, flow rate, material and surface characteristic, temperature and boiling on the fouling of heat transfer equipment are analyzed.
分析了换热设备结垢的主要影响因素：流体性质、流体流速、材质及表面状况、温度和沸腾等。
The heat transfer fluid shall be environmentally safe and shall not require hazardous material disposal.
热传导流体必须是符合环保要求的，不会产生有害物质。
The result shows that the offset strip fin heat exchanger is a new - type and high - efficiency exchanger which is higher heat transfer efficiency, more compact and more saving material.
结果表明，错位翅片型板翅换热器是一种传热效率高、占用空间小、节省材料的新型换热器。
Presents an optimal design method for PCM (phase change material) packed bed based on the heat transfer characteristics.
根据相变材料蓄冷堆积床的传热特性，提出了一种堆积床的优化设计方法。
When the battery surface temperature is in the phase change temperature range, the cooling effect is not obvious by continuing increasing material thickness and convective heat transfer coefficient.
当电池表面温度处于相变材料的相变温度区间时，继续增加材料厚度和对流换热系数散热效果不显著；
It shows that the thickness of cooling hard layer is associated with the state of stress and heat preservation material by analyzing the heat transfer principle.
对挤压过程热传递过程分析表明坯料冷却程度与其所处应力状态和保温介质有关。
The plate type water heater using corrugated plate heat transfer enhancement technique possesses features of high efficient, compact, material saving and low cost.
板式热水器采用波纹板强化传热技术，具有高效、紧凑、节省材料和低成本等优点。
The major advantages of microwave used for material processing are rapid heat transfer, volumetric heating and selective heating, pollution-free environment and automatic control.
微波处理材料的优点是传热快、体积加热和选择性加热、无环境污染和容易自动控制。
It showed that this kind of molten salt had appropriate melting point and favorable thermal stability, and was suit for high temperature heat transfer material.
结果表明，此复合熔盐具有合适的熔点和良好的热稳定性，是一种优良的高温热载体。
The combined radiation and conduction heat transfer in multilayer perforated insulation material MLPIM in orbit were investigated. The energy equation of the reflective screen was established.
分析了空间多层打孔隔热材料中导热和辐射换热的复合传热问题，建立了关于反射屏的能量方程。
The proper nanometer covering material is chosen base on the characteristics of fouling. And the characteristics of flow, heat transfer and fouling of sewage in nanometer coat pipes are study.
论文依据污水及管内污垢的特性选择适当的纳米涂料，并对纳米涂料管内的污水流动、换热、污垢增长特性等进行了实验研究。
The material of thermal insulation felt maintains excellent thermal insulation effect in high temperature test, so the correctness of heat transfer analysis method is verified.
隔热毡所用的隔热材料在高温试验下保持良好的隔热效果，验证了本文传热分析方法的正确性。
Pyrophyllite is the most common seal, pressure transfer and heat preservation, insulation material in domestic at present.
高温高压合成超硬材料需要密封介质，叶蜡石是目前国内使用最普遍的密封、传压、保温、绝缘材料。
The utility model has an advantage of solving the problems that the material has a high static pressure, a long heating time and an uneven heat transfer and so on during fractionation.
本实用新型的优点是解决物料在分馏中静压力高，受热时间长，传热不均匀等问题。
A plate heat exchanger having an excellent sea water corrosion resistance is also provided wherein the aluminium alloy material is used as a heat transfer unit using sea water as cooling water.
另外，该板式换热器是将海水作为冷却水的传热部使用所述铝合金材料的耐海水腐蚀性出色的板式换热器。
It depends on many factors, such as material, size, surface conditions of a part, and so on. It is, therefore, difficult to evaluate the heat-transfer coefficient accurately.
它受很多因素的影响，如工件的材质、尺寸、表面状态等，因此很难精确测定。
Pure copper-base material water block provides excellent heat transfer, and anodized water block cover prevents corrosion.
纯铜基料水块提供优良的热传导，阳极氧化和水锁盖防止腐蚀。
Pure copper-base material water block provides excellent heat transfer, and anodized water block cover prevents corrosion.
纯铜基料水块提供优良的热传导，阳极氧化和水锁盖防止腐蚀。
应用推荐