By the super element method, the back analysis and controllable design of composite material laminated plate including complicated micro-structure were completed in the paper.
文中采用超级元方法，对具有复杂细观构造的纤维增强复杂材料层合板进行单参数反分析及可控性设计。
Learner (learn best by hearing and doing, rather than by reading alone), finding a school that offers a multimedia element in their curriculum may help you master the material.
如果你是听觉学习者或实战学习者(通过听和做比单单阅读学得更快)，那么就找一家提供多媒体教学的课程，这样可帮助你更好的掌握学习内容。
By comprehensively analyzing grain size, sedimentary structure, heavy mineral, major and trace element of this core, we discuss material sources and sedimentary environment of it.
对该岩芯进行了粒度、沉积构造、重矿物和常微量化学元素等分析，并综合以上各种指标对岩芯的物质来源和沉积环境进行了详细的探讨。
The present paper deals with the material parameter identification of orthotropic plate with a circular hole by the approach of integrating optimization and boundary element analysis.
结合优化技术和边界元分析，针对正交各向异性孔板进行了材料参数的识别。
The pattern region of each layer constituting at least the piezoelectric element (300) is covered by an insulation membrane (100) made of inorganic insulation material.
构成至少压电元件(300)的各层的图案区域被由无机绝缘材料制成的绝缘膜(100)覆盖。
The satisfactory results are obtained by using concrete calculative examples, A new method is provided to carry out finite element stress analysis for different modulus material.
经过实例分析计算，获得了满意的结果。为对这类材料的结构进行有限元应力分析提供了一种新方法。
In this numerical model the fluid pressure transmission during the rupture-failure process of material is achieved by the coupling and iteration of flow-damage of an element.
在这个数值模型中，材料在开裂破坏过程中流体压力传递通过单元渗流损伤耦合迭代来实现。
The accuracy manifold element can be generated automatically when the continuous material is cut by crack.
对裂缝切割的连续材料，在裂缝的扩展过程中能自动生成正确的流形单元。
Combinatorial material chip technology provides a new way to fabricate multi-element arrays with different parameters on the same substrate by using a series of masks.
组合材料芯片技术是用一系列掩膜在同一块基片上获得含不同参数单元样品面阵的方法。
The opposite substrate 20 has substantially the same outline as the seal material 107. By this seal material 107, the opposite substrate 20 is fixed to the element substrate 10.
对向基板20，具备与密封材料107基本相同的轮廓，通过该密封材料107，对向基板20粘接固定于元件基板10。
The method and process to back analyze the above initial geostress in linear elasticity material with finite element method is discussed, followed by an example.
讨论了在线弹性介质中，通过有限元计算求解这种地应力的方法、过程，并给出算例。
Nonlinear finite element models by incorporating geometric and material nonlinearities were developed using finite element program ANSYS.
首先利用ANSYS程序建立了构件的非线性有限元模型，模型中包含了几何和材料双重非线性。
The influence of geometric parameters on stepped T-type RHS joint was studied by using finite element method considering material and geometrically nonlinear effect.
采用能处理几何非线性和材料非线性影响的有限元方法，研究了几何参数变化对弯矩作用下不等宽t型方管节点性能的影响。
This cell-element is assembled by a empty brick including several braiding yarns with different orientations and a corresponding continuum brick that represents the matrix material.
细观单胞元是由一个含编织纱线的空六面体单元和一个含基体材料的实六面体单元叠合而成。
Dew point corrosion can be effectively avoided by using qualified sulphur as raw material and installing heat pipe element in the low temperature section of economizer.
采用优质硫磺作原料，在省煤器低温段采用热管元件等可有效地解决硫磺制酸露点腐蚀问题。
It is necessary to determine the elastic constants of molded pulp material in advance for analyzing the packaging structure made of molded pulp by finite element method.
用有限元法分析纸浆模塑包装结构，需要事先确定纸浆模塑材料的弹性常数。
The stress distribution can be got by the analysis of Finite Element Method, then judging whether the material has failed by the failure criteria of composite material.
通过有限元分析，计算出了受力情况最恶劣时的响应，得出了应力分布情况，并根据复合材料强度理论判断其强度是否满足条件。
A direct box shear test on granular material is successfully simulated by means of distinct element method.
用离散单元法模拟了粒状体的直剪试验。
In this paper the vibrations of sandwich and composite material plates are analyzed by use of the finite thick strip method. As compared with the conventional finite element and finite strip methods.
本文用有限厚条法进行夹层板、复合材料板的振动分析，与一般有限元、有限条相比具有自由度少、精度高的特点。
This article exerts to probe into the problem by material element analyzing in order to choose an appropriate landing point scientifically and reasonably.
为了能科学地合理地去选择合适的登陆点，文中利用物元分析进行了初步的探讨。
Hysteretic behavior of steel beam-column web connections in steel frames under cyclical load is simulated by finite element method involving material, geometry and status nonlinear.
考虑材料、几何和状态三重非线性，对钢框架梁柱腹板连接在循环荷载作用下的滞回性能进行了有限元模拟。
Crack growth was analyzed by using element eliminating method based on the variation of damage variable. Material flow, strain, stress and damage distribution of different steps was achieved.
根据损伤变量的变化，采用单元消除法分析了剪切裂纹的扩展，并得到了剪切各个段的金属流动、应力应变以及损伤变量分布。
The computational model of air boundary layer of rocket fuze was established. Considering different material characteristics, correlative mathematic model was built by finite element analysis.
建立了弹头引信空气附面层计算模型，借助有限元分析方法，充分考虑引信内部不同材料特性，建立相关数学模型。
Numerical calculation of stress field of engine block made of composite material is carried out by means of three dimensional finite element method.
采用三维有限元对复合材料发动机机体的应力场进行了数值计算。
The laser-generated ultrasound theory in thermo-elastic mechanism is discussed first. Then laser-generated ultrasonic in the plate material is simulated numerically by using the finite element method.
首先讨论了热弹机制下脉冲激光超声的激发原理，并利用有限元法数值模拟激光热弹机制下激发板状材料中的超声导波。
The laser-generated ultrasound theory in thermo-elastic mechanism is discussed first. Then laser-generated ultrasonic in the plate material is simulated numerically by using the finite element method.
首先讨论了热弹机制下脉冲激光超声的激发原理，并利用有限元法数值模拟激光热弹机制下激发板状材料中的超声导波。
应用推荐